Brakes for Marker Alpinist binding. If you're prepared to sacrifice some weight saving, the Alpinist binding has specific brakes that add extra safety. Choice of two sizes 90mm or 105mm; sold in pairs. [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
If safety is your number one priority, then the Tyrolia Protector PR13 offers all the features you need to help prevent those serious leg injuries lots of skiers worry about. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. The Full Diagonal Toe gives added safety with its 180 degrees of release from the toe and powerrail design also means that you can have the freedom of a fully length adjustable binding on any flat ski, something usually only reserved for integrated ski and binding packages. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1185 (excluding plates)Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 33.5mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The new Tyrolia Protector Attack 13 sets out its place as one of the safest ski bindings on the market. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. Add in the new lighter weight Attack toe piece and the Tyrolia Protector series is the ultimate when it comes to binding safety. OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.MN Technology Accommodates adult Alpine (ISO 5355 TYPe A), adult Walk (ISO 23223 TYPe A) and all Touring (ISO 9523) ski boots. The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester. General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1430Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 32mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]