The Shimano A530 SPD Single Sided Touring Pedalsare the ideal pedal for recreational cyclists. Perfect for commuting and touring, the Shimano A530 Touring Pedals can be ridden with cleats or normal shoes, as they featured a combination of Shimano SPD mechanism on one side, and a concave stable platform pedal body on the other. Leaders in producing quality bike parts, Shimano offer a wide range of reasonably priced components to satisfy riders of all genres. The Shimano A530 SPD Single Sided Touring Pedalsjoin the great selection of quality products manufactured by the Japanese cycling giants. Shimano A530 SPD Single Sided Touring PedalsFeatures Ideal pedal for recreational riders who commute and tour Combines SPD mechanism on one side and a concave stable platform pedal body on the other, you can ride with cleats or normal shoes Serviceable cup and cone bearings add to long life of the pedals Adjustable cleat tension means you can start off with loose tension for extra easy engagement and release, and turn up the tension as you progress [Full Details]
The DMR Vault Pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setup, theVault pedal offers great stability and grip for the bumpiest of trails. DMR Vault Features Large - 105mm * 115mm Light - 400g per pair Slim- 17mm concave foot bed Tough - Extruded 6061 Aluminium and 4140 Cro-moSteel axles (9/16) Tunable - 11 pins per pedal. Flip the pins to fine-tune the grip Serviceable - High load DU bush and cartridge bearing DMR Vault Spec 105mm x 105mm Platform area 17mm Concave 400g per pair [Full Details]
Take a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry. [Full Details]
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal.Â
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross.
Cleat: Premium brass cleats included
Shims: Included
Release Angle: 15° to 20°
Warranty: 5 years
Weight: 280g per pair
Spindle: Forged scm435 chromoly steel
Body: cast stainless steel
Wings: stamped stainless steel
Spring: 300 series stainless steel
Inner bearing: Bushing
Outer bearing: Cartridge
Maximum rider weight: No restrictions
Special edition colours: Silver/Black
You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).
You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.
As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear. [Full Details]
Take a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry. [Full Details]