Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings
Products available in:
This week's most popular products:
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
If you are just starting your freestyle journey, but don't have the need for a din 18 or 15 binding yet love the look of the Forza colourway, the Look Pivot 12 Forza has you covered. It uses the turntable heel that has multi-directional release for safety and some of the best heel elasticity to reduce the chances of pre-release and makes sure those stomped tricks stay stomped. The main difference between this and it's bigger siblings come's on the toe, it switches to a lighter weight composite Full Action toepiece. This still has great elasticity and a multi directional release design but brings down the price, weight and DIN release values for freestylers and freeriders who want to lap the park or enjoy playing all over the hill. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Full Action Toe PieceFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 4-12Brake Width: 95Weight: 1105Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
£510.00
From Ellis Brigham
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red [Full Details]
Bindings - Compare Prices
This accessory allows you to add a brake to your Atomic Backland Pure or Salomon MTN binding. Coming in a selection of sizes you can choose the right one for your ski. The locking of the brakes works independently of the heel unit and is extremely easy to do. Sold as a pair. [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Atomic Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 880Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/gold [Full Details]
The Atomic Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 880Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/gold [Full Details]
Copyright Interhike. All rights reserved.