Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings
Products available in:
This week's most popular products:
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
£400.00 - £450.00
The Armada Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100, 110Weight: 865Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
Bindings - Compare Prices
The Attack 11 GW is the obvious option for skiers wanting great performance from a lightweight binding. It uses the same wide platform as its bigger brother, meaning impressive energy transmission. The toe piece is identical too, with a horizontal toe release spring ensuring a compact size and low swing weight. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 3-11Brake Width: 95Weight: 955Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Attack 14 should be at the top of the list for anyone seeking a versatile high-performance binding. The FR Pro3 toe piece is compatible with Alpine and GripWalk soles; an NX FR heel is used for all mountain power and precision whilst keeping weight down. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 4-14Brake Width: 95, 110Weight: 1010Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Attack 14 should be at the top of the list for anyone seeking a versatile high-performance binding. The FR Pro3 toe piece is compatible with Alpine and GripWalk soles; an NX FR heel is used for all mountain power and precision whilst keeping weight down. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 4-14Brake Width: 95, 110Weight: 1010Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
£290.00
From Ellis Brigham
If safety is your number one priority, then the Tyrolia Protector PR13 offers all the features you need to help prevent those serious leg injuries lots of skiers worry about. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. The Full Diagonal Toe gives added safety with its 180 degrees of release from the toe and powerrail design also means that you can have the freedom of a fully length adjustable binding on any flat ski, something usually only reserved for integrated ski and binding packages. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1185 (excluding plates)Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 33.5mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
£300.00
From Ellis Brigham
The new Tyrolia Protector Attack 13 sets out its place as one of the safest ski bindings on the market. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. Add in the new lighter weight Attack toe piece and the Tyrolia Protector series is the ultimate when it comes to binding safety. OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.MN Technology Accommodates adult Alpine (ISO 5355 TYPe A), adult Walk (ISO 23223 TYPe A) and all Touring (ISO 9523) ski boots. The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester. General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1430Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 32mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
Copyright Interhike. All rights reserved.