Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£290.00
From Ellis Brigham
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370.00 - £560.00
Using many features of the top-end models in the range, the Hawx Prime XTD 100 HT is an excellent introduction in to the world of BC ski boots providing performance, comfort and excellent value. Prolite construction uses different thicknesses of shell wall to balance lightweight with power and control. The Free/Lock hike and ski system provides 54deg of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the 3D Silver Touring liner takes a mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles at the toes (not at the heel) so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver with Touring Flex Zone, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. A special construction in the rear of the liner allows it to flex backwards for a more comfortable range of motion when the walk mode is being used.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: Toe onlyHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1962 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert [Full Details]
£400.00
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£520.00
From Ellis Brigham
The upgraded Ultra 130 is 25% more stable and even more powerful than the previous version. It sits at the top of our advanced/expert selection with a True Flex shell of 130. True Flex PU is less affected by temperature and while traditional PU softens or stiffens as the mercury goes up or down altering the way the boot feels, True Flex stays consistent. This high-grade plastic also means an ultra-thin shell can be produced, increasing sensitivity with a noticeable weight saving but without any loss in performance or stability. The energy Backbone on the spine effectively transmits forces to drive skis, and the Power Shift on the rear of the cuff allows forward lean and flex to be adjusted for a personalised setup. A 98mm last and pre-formed ankle pockets provide all the foot hold good skiers want. The class-leading Mimic Platinum custom liner and Memory Fit shell deliver the best possible fit.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
Ski Boots - Compare Prices
£175.00
From Ellis Brigham
The Cochise 95 W is ideal for skiers who spend the majority of their time skiing from lifts but who are also considering trying different terrain and conditions. The lightweight shell and 42o range of motion make short skins and hikes more comfortable. There’s no loss in performance thanks to the Power Light design with its stiffer and thinner frame material. C.A.S. on the shell and liner enable our boot fitters to make simple and effective alterations to the fit, even after the liner has been heat moulded. [Full Details]
£550.00
From Ellis Brigham
The new version of the Cochise is both stronger and lighter, an impressive upgrade on what was already a class leading offering for skiers who demand the best downhill performance plus comfort and ease for ascending. The most noticeable change is the T-Ride hike system that increases the range of motion as well as improving the strength and power transfer. C.A.S. is still present on the shell and liner, as well as the tongue now, meaning customisation is simple and very effective to achieve a truly personalised fit.Ability LevelOverviewFitGood heel hold, medium mid-foot and comfy toe box.Shell PU shell with PP cuff and Carbon Co-injected Back Spine, mouldable. PU on the shell provides the strength and the Asymmetric Power Transmission uses thicker plastic on the medial/inside part of the boot ensuring more lateral power transfer and increased edge grip. The PP on the cuff helps to keep the weight down.LinerPerformance C.A.S, mouldable, with Floating Tongue, Celliant and fibreglass collar. The Cochise C.A.S. liners are light, anatomically shaped for optimal comfort and great heel hold. The dual density micro-cells material is durable and easy to customize. For unmatched personal customisation, the C.A.S. liner can be thermo-moulded, punched and grinded. The new folding structure on the back ensures easy hiking. Celliant transforms your body's heat into full-spectrum infrared energy, promoting local circulation and cell oxygenation while keeping you drier and at the perfect temperature.Key FeaturesT-RideThe T-Ride system is fully integrated into the boot design. It's a solid cuff-to-shell connection which delivers the perfect combination between downhill performance and uphill hiking ability. The design makes it easy and intuitive, you will always be sure whether is on ski or hiking mode. The integrated lock system screw ensures that the mechanism stays closed even during hard cliff landings or impact with rocks. 50 degrees range of motion allows a comfortable hike up to the summit when in walk mode; the T-Ride longer lever arm guarantees a quicker edge to edge transition, increased lateral power and stability.C.A.S. (Custom Adaptive Shell)The C.A.S. Fit System gives the ability to customise the ski boot for a truly personal fit. The anatomical shape of the liner and shell are the key to a great out-of-the-box fit. The closer the liner and shell match he natural shape of the foot, the better the fit and performance will be. The C.A.S. shell has dimples on the shell that reduce surface tension and facilitate the thermo customisation process. The dual density micro-cells material of the C.A.S. liner is durable and easy to customize, and for unmatched personal customisation the. liner can be thermo-moulded, punched and grinded. The C.A.S. Tongue is a great addition to the C.A.S. customisation system, it can be thermoformed in a few minutes to perfectly match the shape of your shin, reducing shin pain and increasing performance.Quick InstepThe instep material is softer, making stepping in and out easy and avoiding unnecessary pain, especially at low temperatures.Asymmetric Power TransmissionThe inside of the boot is made with thicker plastic to increase support where needed. This provides more lateral power transmission and increased edge grip.Free MoveThe new hinge point allows frictionless hiking, so you can hike more with less energy.Arch GripToe and heel Vibram® rubbered soles are connected by the rubber Arch Grip that delivers more versatility in the daily usage. It supplies more grip on mountain terrain, on metal ladders, on snowmobiles, and so on.SpecificationCategory: BackcountryFlex: 120Last Width: 99Custom Shell: NoCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Light Buckles, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, T Ride Hike SystemRange of Motion: 50Weight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Copyright Interhike. All rights reserved.