Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Cycling > Cycling Shoes
Products available in:
This week's most popular products:
Giro's Petraâ„¢ VR Shoes are resourceful cycling shoes that don't compromise the flexibility you need when you're walking on the trail. They combine performance riding features like clipless pedal compatibility with the walkable comfort of light hiking shoes. [Full Details]
£59.99 - £94.99
Designed for the adventure cyclist, the Rumble VR Off Road Shoes are ideal for both riding and walking. Giro have found the perfect balance by combining the features of a top mountain biking shoe with the walkable comfort of a Vibram hiking shoe. [Full Details]
£119.99 - £149.99
An evolution of the original Chamber, as seen winning EWS and DH World Cups, the Giro Chamber II gets key updates to cleat positioning and a new flex pattern to raise the game of flat pedal shoes to new heights. [Full Details]
£139.99
TheFizik R5B Donna Womens Shoe. The R5B is fi’zi:k’s most accessible road shoe, inheriting many of its features from the R1 and R3 models. It’s comfortable and lightweight, with a carbon-reinforced nylon outsole stiff enough for most. Many agree that it’s hard to find an Italian-made road cycling shoe that looks as sharp, at this price. Fizik R5B Donna Womens Shoe Features Carbon-reinforced Nylon Outsole Laser-perforated Microtex upper (as used on fi’zi:k saddle covers: lighter than leather, very durable, good in wet conditions, breathable and cleans up well) with Reflective Inserts. BOA IP1 closure system (tri-modal: tighten, loosen and complete release) Neutral fit to accommodate the majority of foot shapes Volume: low/medium/high Fi’zi:k Cycling Insole Weight: 260g (size 43, without insole) [Full Details]
Cycling Shoes - Compare Prices
ION’s flat-pedal shoe Raid Amp comes with an asymmetrical shaft including the Ankle Pad to add some protection on the crank side. The specific flat-pedal sole called Sup Traction Rubber Soul FL (FL for flat pedal) featuring an EVA midsole shows dedicated pedal zones. They extend from the ball of the foot to the very end of the midfoot area. Toe and heel areas are shaped with particular climb zones to ensure maximum traction off the pedal. The second main focus during development has been placed on the right mixture of stiffness in the longitudinal axis and flexibility across the lateral axis: a flat-pedal shoe needs to provide power transmission without any compromises in the longitudinal axis when pedalling. On the lateral axis you need a certain flex to prevent the foot from tilting on the pedal but still allow for effective steering impulses. And all this while maintaining comfortable foot roll behaviour. The shaft of the Raid Amp is made from synthetic leather. In the toe area a pre-shaped firm toe box protects the foot when it hits rocks or roots. A two-component insole (2C insole) supports the arch in the midfoot area and adds some extra damping to the heel section. Weight: 400 g per shoe (size 42) [Full Details]
ION’s flat-pedal shoe Raid Amp comes with an asymmetrical shaft including the Ankle Pad to add some protection on the crank side. The specific flat-pedal sole called Sup Traction Rubber Soul FL (FL for flat pedal) featuring an EVA midsole shows dedicated pedal zones. They extend from the ball of the foot to the very end of the midfoot area. Toe and heel areas are shaped with particular climb zones to ensure maximum traction off the pedal. The second main focus during development has been placed on the right mixture of stiffness in the longitudinal axis and flexibility across the lateral axis: a flat-pedal shoe needs to provide power transmission without any compromises in the longitudinal axis when pedalling. On the lateral axis you need a certain flex to prevent the foot from tilting on the pedal but still allow for effective steering impulses. And all this while maintaining comfortable foot roll behaviour. The shaft of the Raid Amp is made from synthetic leather. In the toe area a pre-shaped firm toe box protects the foot when it hits rocks or roots. A two-component insole (2C insole) supports the arch in the midfoot area and adds some extra damping to the heel section. Weight: 400 g per shoe (size 42) [Full Details]
ION’s flat-pedal shoe Raid Amp comes with an asymmetrical shaft including the Ankle Pad to add some protection on the crank side. The specific flat-pedal sole called Sup Traction Rubber Soul FL (FL for flat pedal) featuring an EVA midsole shows dedicated pedal zones. They extend from the ball of the foot to the very end of the midfoot area. Toe and heel areas are shaped with particular climb zones to ensure maximum traction off the pedal. The second main focus during development has been placed on the right mixture of stiffness in the longitudinal axis and flexibility across the lateral axis: a flat-pedal shoe needs to provide power transmission without any compromises in the longitudinal axis when pedalling. On the lateral axis you need a certain flex to prevent the foot from tilting on the pedal but still allow for effective steering impulses. And all this while maintaining comfortable foot roll behaviour. The shaft of the Raid Amp is made from synthetic leather. In the toe area a pre-shaped firm toe box protects the foot when it hits rocks or roots. A two-component insole (2C insole) supports the arch in the midfoot area and adds some extra damping to the heel section. Weight: 400 g per shoe (size 42) [Full Details]
Based on the SupTraction Rubber Soul CL (CL for clipless) and with an EVA midsole the Rascal offers much more than uncompromising power transmission onto the pedal: its construction combines stiffness in the longitudinal axis with flexibility in the lateral axis and the upper. This torsional construction principle helps to prevent the foot from tilting on the pedal. Special dedicated climbing and pedal zones on the tread ensure traction both on and off the pedal. In addition, the lacing, especially the Serpen_Tie (Rascal only), makes sure the upper is perfectly closed, thus adapting to the individual needs and different shapes of the foot. Toetal_Protection (an injected toe cap) and No-Sew_Reinforcements absorb and dissipate the forces when the foot hits a rock or roots, protecting both the shoe and its contents. The asymmetrically shaped upper as well as the Ankle_Pad protect the foot on the crank side while still offering full freedom of movement. The combination of heel hold (through preshaped heel and internal padding), a supportive foot bed with a 2C (=two component) insole and cushioned midsole offers outstanding comfort. Laser cut Jet_Stream ventilation holes and fabrics ensure a balanced foot climate. Weight: 469 g per shoe (size 42, without cleat) [Full Details]
Based on the SupTraction Rubber Soul CL (CL for clipless) and with an EVA midsole the Rascal offers much more than uncompromising power transmission onto the pedal: its construction combines stiffness in the longitudinal axis with flexibility in the lateral axis and the upper. This torsional construction principle helps to prevent the foot from tilting on the pedal. Special dedicated climbing and pedal zones on the tread ensure traction both on and off the pedal. In addition, the lacing, especially the Serpen_Tie (Rascal only), makes sure the upper is perfectly closed, thus adapting to the individual needs and different shapes of the foot. Toetal_Protection (an injected toe cap) and No-Sew_Reinforcements absorb and dissipate the forces when the foot hits a rock or roots, protecting both the shoe and its contents. The asymmetrically shaped upper as well as the Ankle_Pad protect the foot on the crank side while still offering full freedom of movement. The combination of heel hold (through preshaped heel and internal padding), a supportive foot bed with a 2C (=two component) insole and cushioned midsole offers outstanding comfort. Laser cut Jet_Stream ventilation holes and fabrics ensure a balanced foot climate. Weight: 469 g per shoe (size 42, without cleat) [Full Details]
Based on the SupTraction Rubber Soul CL (CL for clipless) and with an EVA midsole the Rascal offers much more than uncompromising power transmission onto the pedal: its construction combines stiffness in the longitudinal axis with flexibility in the lateral axis and the upper. This torsional construction principle helps to prevent the foot from tilting on the pedal. Special dedicated climbing and pedal zones on the tread ensure traction both on and off the pedal. In addition, the lacing, especially the Serpen_Tie (Rascal only), makes sure the upper is perfectly closed, thus adapting to the individual needs and different shapes of the foot. Toetal_Protection (an injected toe cap) and No-Sew_Reinforcements absorb and dissipate the forces when the foot hits a rock or roots, protecting both the shoe and its contents. The asymmetrically shaped upper as well as the Ankle_Pad protect the foot on the crank side while still offering full freedom of movement. The combination of heel hold (through preshaped heel and internal padding), a supportive foot bed with a 2C (=two component) insole and cushioned midsole offers outstanding comfort. Laser cut Jet_Stream ventilation holes and fabrics ensure a balanced foot climate. Weight: 469 g per shoe (size 42, without cleat) [Full Details]
Based on the SupTraction Rubber Soul CL (CL for clipless) and with an EVA midsole the Rascal offers much more than uncompromising power transmission onto the pedal: its construction combines stiffness in the longitudinal axis with flexibility in the lateral axis and the upper. This torsional construction principle helps to prevent the foot from tilting on the pedal. Special dedicated climbing and pedal zones on the tread ensure traction both on and off the pedal. In addition, the lacing, especially the Serpen_Tie (Rascal only), makes sure the upper is perfectly closed, thus adapting to the individual needs and different shapes of the foot. Toetal_Protection (an injected toe cap) and No-Sew_Reinforcements absorb and dissipate the forces when the foot hits a rock or roots, protecting both the shoe and its contents. The asymmetrically shaped upper as well as the Ankle_Pad protect the foot on the crank side while still offering full freedom of movement. The combination of heel hold (through preshaped heel and internal padding), a supportive foot bed with a 2C (=two component) insole and cushioned midsole offers outstanding comfort. Laser cut Jet_Stream ventilation holes and fabrics ensure a balanced foot climate. Weight: 469 g per shoe (size 42, without cleat) [Full Details]
Based on the SupTraction Rubber Soul CL (CL for clipless) and with an EVA midsole the Rascal offers much more than uncompromising power transmission onto the pedal: its construction combines stiffness in the longitudinal axis with flexibility in the lateral axis and the upper. This torsional construction principle helps to prevent the foot from tilting on the pedal. Special dedicated climbing and pedal zones on the tread ensure traction both on and off the pedal. In addition, the lacing, especially the Serpen_Tie (Rascal only), makes sure the upper is perfectly closed, thus adapting to the individual needs and different shapes of the foot. Toetal_Protection (an injected toe cap) and No-Sew_Reinforcements absorb and dissipate the forces when the foot hits a rock or roots, protecting both the shoe and its contents. The asymmetrically shaped upper as well as the Ankle_Pad protect the foot on the crank side while still offering full freedom of movement. The combination of heel hold (through preshaped heel and internal padding), a supportive foot bed with a 2C (=two component) insole and cushioned midsole offers outstanding comfort. Laser cut Jet_Stream ventilation holes and fabrics ensure a balanced foot climate. Weight: 469 g per shoe (size 42, without cleat) [Full Details]
Copyright Interhike. All rights reserved.