Travel and Outdoor Equipment Price Comparison > Crank Brothers Eggbeater 2 Pedal

Crank Brothers Eggbeater 2 Pedal

Crank Brothers Eggbeater 2 Pedal

Crank Brothers Eggbeater 2 Pedal
£89.99

The Eggbeater 2 pedal is an ultra-lightweight clipless pedal designed for cross-country and cyclo-cross use. The design for the original Crank Brothers pedal began out of frustration. The founders of Crank Brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the Eggbeater pedal. The Eggbeater has a 4-sided entry design which is very open, allowing for excellent mud shedding and is also extremely lightweight due to the very simple pedal design. There is an increased float of 6 degrees of a side-to-side rotational play, this play allows the rider to shift positions on the bike while keeping their feet clipped in, improving control and handling. You can also customise the fit between your shoe and the pedal by using tread contact sleeves (sold separately), and Crank Brothers pedals are fully re-buildable with consistency in parts across all models for simple maintenance and servicing.

Alternative Shops

Image
(Click to enlarge)
ProductPriceBuy from...
CRANK-BROTHERS Eggbeater 2 Pedal Silver/BlackCRANK-BROTHERS Eggbeater 2 Pedal Silver/Black [more info...]£89.99AW Cycles

More from AW Cycles
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.Cleat: Premium brass cleats includedShims: IncludedRelease Angle: 15° to 20°Warranty: 5 yearsWeight: 280g per pairSpindle: Forged scm435 chromoly steelBody: cast stainless steelWings: stamped stainless steelSpring: 300 series stainless steelInner bearing: BushingOuter bearing: CartridgeMaximum rider weight: No restrictionsSpecial edition colours: Silver/BlackYou can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear [Full Details]
Crank Brothers Eggbeater 2 XC Pedal Silver/BlackCrank Brothers Eggbeater 2 XC Pedal Silver/Black [more info...]£94.99Leisure Lakes Bikes

More from Leisure Lakes Bikes
TheCrank Brothers Eggbeater 2 XC Pedal is the strong, durable and lightweight pedal that has been designed for the fast-paced cross country mountain bike style and is kitted out with loads of features that helps it to achieve its top performance goal. The Crank Brother's clipless bike pedal is made from a cast stainless body, wings and springs that keeps strength high and weight low whilst the low profile design of the pedal gives a more powerfil and efficient pedal stroke for faster pedalling when racing on the trails. The Eggbeater 2 is a smooth sailor with its steel spindle and cartridge outer bearings, which also helps to fend off mud for a low maintenance pedals. The Crank Brothers pedal also allows you to customize the angles for your perfect pedal on the pedals and the plastic end caps also means less mud enters the pedals. Crank Brothers Eggbeater 2 XC PedalFeatures Brass cleat and mounting hardware included Cast stainless body, wings and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps " [Full Details]

Prices and availability are correct at the time of publishing, but advertisers may change the details before we have time to update them.

Videos for "Crank Brothers Eggbeater 2 Pedal"

Crank Brothers Eggbeater Pedal Review from Performance BicyclePlay buttonCrank Brothers Egg Beater 2 PedalsPlay buttonThe best clipless pedals to use for new cyclists: CrankBrothers EggbeaterPlay buttonCrank Brothers Candy Pedals Review from Performance BicyclePlay buttonInstalling Crankbrothers Eggbeater pedals on Trek X-Caliber 6Play button
Supplied by Google & Youtube

Crank Brothers Eggbeater 2 Pedal Reviews

No reviews found.

Submit your own review

Rating

Review

AddThis
AddThis

Copyright Interhike. All rights reserved.