Compare Prices on Outdoor Equipment



⌄


Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings

Add Interhike.com search to your browser
Products available in:

Bindings - Compare Prices

Hide Product Images Hide Product Images
Product
Price
Buy
Buy From...
This accessory allows you to add a brake to your Atomic Backland Pure or Salomon MTN binding. Coming in a selection of sizes you can choose the right one for your ski. The locking of the brakes works independently of the heel unit and is extremely easy to do. Sold as a pair. [Full Details]
Replacement pair of brakes for the Shift binding (Salomon, Atomic or Armada). [Full Details]
Brakes for Marker Alpinist binding. If you're prepared to sacrifice some weight saving, the Alpinist binding has specific brakes that add extra safety. Choice of two sizes 90mm or 105mm; sold in pairs. [Full Details]
If you are looking for a binding to complete your first freestyle or freeride set-up then the Marker Squire 10 is a great option at an affordable price. It goes down to a DIN 3 which is great for junior rippers or beginner lighter adults who need low release values and up to 10 for slightly more advanced riders. The compact heel uses a lightweight construction to keep everything feeling playful and easy to manoeuvre. If you are heading off-piste and into the trees for the first time or attempting a new trick these bindings will keep you safe without busting the bank. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.General InformationDIN / Release Value: 3-10Brake Width: 100Weight: 815Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Attack 11 GW is the obvious option for skiers wanting great performance from a lightweight binding. It uses the same wide platform as its bigger brother, meaning impressive energy transmission. The toe piece is identical too, with a horizontal toe release spring ensuring a compact size and low swing weight. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 3-11Brake Width: 95Weight: 955Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Attack 14 should be at the top of the list for anyone seeking a versatile high-performance binding. The FR Pro3 toe piece is compatible with Alpine and GripWalk soles; an NX FR heel is used for all mountain power and precision whilst keeping weight down. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 4-14Brake Width: 95, 110Weight: 1010Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Attack 14 should be at the top of the list for anyone seeking a versatile high-performance binding. The FR Pro3 toe piece is compatible with Alpine and GripWalk soles; an NX FR heel is used for all mountain power and precision whilst keeping weight down. Requires a ski width of 80mm or wider.OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFR PRO3 TOe The toe construction extends the possibilities of all mountain skiing: The new standard toe construction in the Attack line, FR PRO3 - is compatible with Alpine and GripWalk ski boots. The super secure 77mm metal Anti Friction Device (AFD Metal) can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots.AFD Metal The super secure 77mm metal Anti Friction Device, AFD Metal, can be adjusted to Alpine Boots (Type A ISO 5355) and GripWalk Boots (ISO 23223). Adjusting the height of the AFD according to your ski boot sole height has many advantages 1. exact adaptation of boot-binding system 2. Better performance on skis 3. Precise release values and re-centering of the boot.SX FR HeelModified heel construction and reduced weight, ideal for all mountain skiing. The metal heel track and screw mounts improve durability.General InformationDIN / Release Value: 4-14Brake Width: 95, 110Weight: 1010Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 17mmAvailable Adjustment: 32mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
If you are just starting your freestyle journey, but don't have the need for a din 18 or 15 binding yet love the look of the Forza colourway, the Look Pivot 12 Forza has you covered. It uses the turntable heel that has multi-directional release for safety and some of the best heel elasticity to reduce the chances of pre-release and makes sure those stomped tricks stay stomped. The main difference between this and it's bigger siblings come's on the toe, it switches to a lighter weight composite Full Action toepiece. This still has great elasticity and a multi directional release design but brings down the price, weight and DIN release values for freestylers and freeriders who want to lap the park or enjoy playing all over the hill. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Full Action Toe PieceFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 4-12Brake Width: 95Weight: 1105Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, AFD Gliding PlateCLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.SpecificationDIN / Release Value: 4-12Brake Width: 100Weight: 1090 (SML), 1110 (LRG)Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty : Yes (specific model)Boot Lengh : 264 - 327 mm, 304 - 367 mmColour: Black / Anthracite [Full Details]
The choice of freeskiers who demand superior performance, the Jester ID is compatible with Alpine, GripWalk and Tour certified soles. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Never before seen performance in a binding this weight.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium PartsMagnesium sole holders in the toe combinded with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 6-16Brake Width: 100, 110Weight: 1070Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black/grey [Full Details]
The choice of freeskiers who demand superior performance, the Jester ID is compatible with Alpine, GripWalk and Tour certified soles. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Never before seen performance in a binding this weight.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium PartsMagnesium sole holders in the toe combinded with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 6-16Brake Width: 100, 110Weight: 1070Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black/grey [Full Details]
The Look Pivot is one of the most iconic bindings when it comes to freestyle or freeride set-ups and the Pivot 15 uses all the design safety and construction from its bigger brother, but in a lower DIN value range. A combination of aluminium and steel parts will take all the abuse that park or freeride skiers dish out, yet also offer some of the best safety available on the market with multiple directions of realease reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If lapping parks is your thing and you like to spend time jibbing everywhere else, the Pivot 15 will help keep you connected to your skis yet safe. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 6-15Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Look Pivot is one of the most iconic bindings when it comes to freestyle or freeride set-ups and the Pivot 15 uses all the design safety and construction from its bigger brother, but in a lower DIN value range. A combination of aluminium and steel parts will take all the abuse that park or freeride skiers dish out, yet also offer some of the best safety available on the market with multiple directions of realease reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If lapping parks is your thing and you like to spend time jibbing everywhere else, the Pivot 15 will help keep you connected to your skis yet safe. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 6-15Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Look Pivot is one of the most iconic bindings when it comes to freestyle or freeride set-ups and the Pivot 15 uses all the design safety and construction from its bigger brother, but in a lower DIN value range. A combination of aluminium and steel parts will take all the abuse that park or freeride skiers dish out, yet also offer some of the best safety available on the market with multiple directions of realease reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If lapping parks is your thing and you like to spend time jibbing everywhere else, the Pivot 15 will help keep you connected to your skis yet safe. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 6-15Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Look Pivot is one of the most iconic bindings when it comes to freestyle or freeride set-ups and the Pivot 15 uses all the design safety and construction from its bigger brother, but in a lower DIN value range. A combination of aluminium and steel parts will take all the abuse that park or freeride skiers dish out, yet also offer some of the best safety available on the market with multiple directions of realease reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If lapping parks is your thing and you like to spend time jibbing everywhere else, the Pivot 15 will help keep you connected to your skis yet safe. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 6-15Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
If safety is your number one priority, then the Tyrolia Protector PR13 offers all the features you need to help prevent those serious leg injuries lots of skiers worry about. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. The Full Diagonal Toe gives added safety with its 180 degrees of release from the toe and powerrail design also means that you can have the freedom of a fully length adjustable binding on any flat ski, something usually only reserved for integrated ski and binding packages. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1185 (excluding plates)Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 33.5mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The new Salomon STH2 16 MNC builds on the build quality of previous models using a steel, aluminium and glass fibre PA construction to make them tough yet light. However, this new version uses some clever technology that allows you to dial in the performance to suit your riding style or terrain. A switch on the heel changes the heel elasticity; reduce it to make the binding interface feel more precise and quicker to respond which is great on-piste, or increase it to make them better suited to absorb bigger knocks and impacts when you're riding in the park or playing in the powder. A patented 3D Driver toe with multi-directional release adds extra safety and is also Multi Norm Compatible too meaning you don't have to worry if your boot is alpine, GripWalk or tour certified. Just click in and go.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. XL WingsLong wings envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings.+elastic travelThe ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.Low profile ChassisLow stand height for increased terrain feedback and enhanced power transmission.Dual Transfer SwitchUse the dial on the heel switch to increase elastic return for better shock absorption or reduce it to make the transfer of power more immediate for increased response from your skis.General InformationDIN / Release Value: 7-16Brake Width: 100, 115Weight: 1240Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 22mmAvailable Adjustment: 28mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: red [Full Details]
The new Salomon STH2 16 MNC builds on the build quality of previous models using a steel, aluminium and glass fibre PA construction to make them tough yet light. However, this new version uses some clever technology that allows you to dial in the performance to suit your riding style or terrain. A switch on the heel changes the heel elasticity; reduce it to make the binding interface feel more precise and quicker to respond which is great on-piste, or increase it to make them better suited to absorb bigger knocks and impacts when you're riding in the park or playing in the powder. A patented 3D Driver toe with multi-directional release adds extra safety and is also Multi Norm Compatible too meaning you don't have to worry if your boot is alpine, GripWalk or tour certified. Just click in and go.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. XL WingsLong wings envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings.+elastic travelThe ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.Low profile ChassisLow stand height for increased terrain feedback and enhanced power transmission.Dual Transfer SwitchUse the dial on the heel switch to increase elastic return for better shock absorption or reduce it to make the transfer of power more immediate for increased response from your skis.General InformationDIN / Release Value: 7-16Brake Width: 100, 115Weight: 1240Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 22mmAvailable Adjustment: 28mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: red [Full Details]
The new Tyrolia Protector Attack 13 sets out its place as one of the safest ski bindings on the market. Knee injuries are the number 1 lower leg injury, caused by backwards twisting falls, yet many bindings do not offer a protective release function for the knee. This innovative design features Full Heel Release technology that provides 7mm of bilateral movement and 30 degrees of rotational movement, it allows the binding to absorb knocks and shocks yet manages to reliably release in multiple directions for total lower leg protection. Add in the new lighter weight Attack toe piece and the Tyrolia Protector series is the ultimate when it comes to binding safety. OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesFull Heel Release TechnologyThe Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. The FHR function can reduce ACL strain by more than 50%.MN Technology Accommodates adult Alpine (ISO 5355 TYPe A), adult Walk (ISO 23223 TYPe A) and all Touring (ISO 9523) ski boots. The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester. General InformationDIN / Release Value: 4-13Brake Width: 95Weight: 1430Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 32mmAvailable Adjustment: 60mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: solid black [Full Details]
The Look Pivot 18 is the go-to binding for a lot of the pro freestylers, watch the Winter X-games and you'll be bound to see a set. Its solid build and safety are the main reasons why. The combination of aluminium and steel parts will take all the abuse that good park or freeride skiers dish out to their kit, yet also offer some of the best safety available on the market with multiple directions of release, reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If you enjoy stomping big tricks or cliffs and demand a high DIN, then these bindings should 100% be at the top of your list. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 8-18Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Look Pivot 18 is the go-to binding for a lot of the pro freestylers, watch the Winter X-games and you'll be bound to see a set. Its solid build and safety are the main reasons why. The combination of aluminium and steel parts will take all the abuse that good park or freeride skiers dish out to their kit, yet also offer some of the best safety available on the market with multiple directions of release, reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If you enjoy stomping big tricks or cliffs and demand a high DIN, then these bindings should 100% be at the top of your list. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 8-18Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Alpinist 10 is Marker's take on the super light pin sector. The relatively wide 38mm drill pattern provides excellent power transmission; the simple design means no unnecessary grams. A carbon reinforced toe with twin springs and integrated rubber pads add strength and keeps the weight down.OverviewBinding TypeBackcountry PinBoot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and reliability. The Pin set up of the Alpinist saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable and tough.Key FeaturesSKIING, Active Length CompensationActive length compensation in the heel allows the heel to move back up to 4 mm when the ski is flexed, helping to maintain a consistent pressure.SKIING, Carbon Reinforced Toe The toe uses carbon fibre reinforced material for improved stiffness and response whilest skiing downhill yet keeping the weight down for the climb up.SKIING, Alpinist HeelAdjustable lateral release values to suit your skiing and 15mm of heel adjustment range (+-7.5mm).CLIMBING, Climbing AidsNeutral walking mode and two climbing aids offering 5° and 9°. The fast shift mode enables quick shifting between 0° and 9° without the need to rotate the heel.CLIMBING, Anti Ice PadsClimbing: Anti Ice Pads in the base of toe and heel (if no brake is installed) to prevent icing in critical areas to increase binding function and safety.General InformationDIN / Release Value: 6-12Brake Width: optional extraWeight: 245Boot Sole Standard Compatibility: PinCert, PinStand Height: 18mmAvailable Adjustment: 15mmClimbing Positions: 0°, 5°, 9°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Marker Jester 18 Pro ID is all about bomb proof build quality and a high DIN for skiers who ride fast and stomp hard landings. They use strong yet lightweight magnesium parts so they will take all the bumps and knocks that chargey skiers or hardcore freestylers deal out to their kit. The Inter Pivot 3 Freeride Heel has some of the best heel elasticity on the market and the Triple Pivot elite Toe has some clever geometry that improves boot-binding retention even further, making sure you don't pre-release on big landings and ride away even if you don’t land perfectly. They also have Sole.ID meaning compatibility issues are a thing of the past. If your motto is 'go big or go home', these are the bindings for you.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption reducing the risk of early release. The large supporting surface optimises the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium Parts Magnesium sole holders in the toe combined with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent safety for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding. SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 8-18Brake Width: 110Weight: 1105Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Tan [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, AFD Gliding PlateA moveable AFD (anti friction device) supports a precise, consistant release almost entirely unhindered by dirt, snow, ice or boot sole.CLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.General InformationDIN / Release Value: 4-12Brake Width: 100Weight: 1096Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: 264 - 327 mm [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, AFD Gliding PlateA moveable AFD (anti friction device) supports a precise, consistant release almost entirely unhindered by dirt, snow, ice or boot sole.CLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.General InformationDIN / Release Value: 4-12Brake Width: 100Weight: 1096Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: 304 - 367 mm [Full Details]
The Armada Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100, 110Weight: 865Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Armada Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100, 110Weight: 865Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100Weight: 875Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Salomon MTN Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry PinBoot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidSalomon's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 295Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/titan [Full Details]
The Atomic Backland Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidAtomic's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 298Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Salomon Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 885Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: blue/black [Full Details]
The Salomon Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 885Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: blue/black [Full Details]
The Salomon Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 885Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: blue/black [Full Details]
The Salomon Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 885Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: blue/black [Full Details]
The Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.SpecificationDIN / Release Value: 6-13Brake Width: 110Weight: 885Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Blue [Full Details]
The Salomon Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 885Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: blue/black [Full Details]
The Armada Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 110, 120Weight: 868Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.SpecificationDIN / Release Value: 6-13Brake Width: 110Weight: 885Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Blue [Full Details]
The Atomic Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 880Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/gold [Full Details]
The Atomic Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 100, 110Weight: 880Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/gold [Full Details]
The Marker Kingpin 13 rewrote the rules when it came to bindings, blurring the lines between tradtional alpine bindings and lightweight tour bindings. This season it uses the same legendary features that has made it one of the best hybrid bindings on the market, but adds a slight update to the toe. This year Marker have introduced an integrated stop in the toe that makes boot-binding location much easier when stepping in. It still uses the alpine heel for the best performance, response and added saftey on the way down and a pin toe for weight saving and maximum efficiency on the way up. They still remain one of the best choices for adventurous skiers who need a binding that works well on the ascent to then ski hard on the way back down.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able to rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. Long climbs are a part of the experience.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 6-13Brake Width: 100, 125Weight: 690Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Marker Kingpin 13 rewrote the rules when it came to bindings, blurring the lines between tradtional alpine bindings and lightweight tour bindings. This season it uses the same legendary features that has made it one of the best hybrid bindings on the market, but adds a slight update to the toe. This year Marker have introduced an integrated stop in the toe that makes boot-binding location much easier when stepping in. It still uses the alpine heel for the best performance, response and added saftey on the way down and a pin toe for weight saving and maximum efficiency on the way up. They still remain one of the best choices for adventurous skiers who need a binding that works well on the ascent to then ski hard on the way back down.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able to rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. Long climbs are a part of the experience.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 6-13Brake Width: 100, 125Weight: 690Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 4-12Brake Width: 100, 125Weight: 1180Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 4-12Brake Width: 100, 125Weight: 1180Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Carbon Raider 12 is one of the lightest touring bindings with a 12 DIN and brakes, on the market.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the C Raider 12 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 5-12Brake Width: 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Carbon Raider 12 is one of the lightest touring bindings with a 12 DIN and brakes, on the market.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the C Raider 12 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 5-12Brake Width: 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The carbon-reinforced toe pad ensures optimal edge pressure distribution while the aluminium frame, heels, and essential parts kick the performance and durability to the next level. It is the highest performing most user-friendly and highly reliable lightweight tech binding you could ask for. Designed with maximum precision for optimal uphill performance and astonishing downhill reliability. engineered to the highest performance standards it is equipped with more technology than any binding on the market. eeS, CAM release system, elastic Response System, Magneto heel flaps, Snow pack proof, ICe system and more. At 305 grams per piece, it is a true engineering masterpiece. The adjustable vertical and lateral elasticity is smooth and very simple to adjust, while forward pressure or elastic response system assures the natural flex of the ski in the heel part resulting in maximum energy absorption. With 25 mm of length adjustment and a DIN range from 5-12, it covers all types of boots and users. From extreme conditions to first uphill ascends it is the most reliable and easy step in tech binding ever.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the R10 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key Features*Note that the stomp pad is only compatible with skis with waist width greater than or equal to 95mm. The R10 can be mounted without the stomp pad on skis narrower than 95mm waist. Brake sizes 97mm is compatible with 100RP ski models and the 108mm is compatible with 112 RP models.SKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 4-10Brake Width: 86, 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The carbon-reinforced toe pad ensures optimal edge pressure distribution while the aluminium frame, heels, and essential parts kick the performance and durability to the next level. It is the highest performing most user-friendly and highly reliable lightweight tech binding you could ask for. Designed with maximum precision for optimal uphill performance and astonishing downhill reliability. engineered to the highest performance standards it is equipped with more technology than any binding on the market. eeS, CAM release system, elastic Response System, Magneto heel flaps, Snow pack proof, ICe system and more. At 305 grams per piece, it is a true engineering masterpiece. The adjustable vertical and lateral elasticity is smooth and very simple to adjust, while forward pressure or elastic response system assures the natural flex of the ski in the heel part resulting in maximum energy absorption. With 25 mm of length adjustment and a DIN range from 5-12, it covers all types of boots and users. From extreme conditions to first uphill ascends it is the most reliable and easy step in tech binding ever.OverviewBinding TypeBackcountry Pin Boot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the R10 saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key Features*Note that the stomp pad is only compatible with skis with waist width greater than or equal to 95mm. The R10 can be mounted without the stomp pad on skis narrower than 95mm waist. Brake sizes 97mm is compatible with 100RP ski models and the 108mm is compatible with 112 RP models.SKIING, The Cam Release System is installed on the heels to manage step-in and vertical release in the event of a fall. A special CAM profile is pressed by a pre-tensioned spring towards the heel attachment pins: in the event of step-in or release following a fall, the pins are forced to travel along the CAM profile which responds with a precise resistance to release of the pins, according to the release value calibrated on the heel. The result is the best downhill performance on the market with a consistent reduction in boot torsion compared to any other tech heel unit, extremely precise release performance, provides the softest heel step-in in the industry, and extremely small dimensions that guarantee an amazing lightness.SKIING, When the ski flexes due to a compression or a jump, the heel can move towards the tail of the ski and return to its seat at the end of the stress, thanks to the effect of the elastic Response System, a spring inserted between the slide of the heel and the binding adjustment screw which guarantees 10 or 12 mm of elastic travel depending on the model. This guarantees the natural flex of the ski, even in case of big jumps/compressions, improves release performance under heavy system loads and reduces loads on the ski-boot-binding system.CLIMBING, An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING, 5 walk modes: flat, +32mm, +37mm, +46mm, +52mmCLIMBING An ingenious and simple system of magnets guarantees the stabilization and management of the heel lifters. This makes an extremely light and comfortable system for managing the heel lifters.CLIMBING A special toe design prevents any deposits of snow, ice or other debris from forming under the toe locking mechanism. This reduces the accumulation of snow in the toe, thus ensuring excellent lightness in all phases of use.CLIMBING The easy entry System (eeS) is characterized by a new geometry of the toe hooking elements. An extremely simple, immediate and safe step-in, available with all the latest generation tech boots, even in the case of worn-out soles.General InformationDIN / Release Value: 4-10Brake Width: 86, 97, 108Weight: 305Boot Sole Standard Compatibility: PinCert, PinAvailable Adjustment: 25mmClimbing Positions: flat, +32mm, +37mm, +46mm, +52mmCrampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker pushed existing technology to max out the possibilities and create the Kingpin M-Werks 12. Taking all the best bits of the standard version they've added a carbon reinforced pin toe and heel, new ergonomic ski/walk lever and climbing aids, and a new XXL Power Transmitter. The result is a lighter, more precise and more responsive binding that ascends with ease and attacks the descent.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. The M-Werks takes this even further than the standard Kingpin with more Carbon used and more grams saved.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 5-12Brake Width: 100, 125Weight: 630Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The Inter Pivot 3 Freeride Heel of the Duke 16 has improved power transmission, energy absorption and vertical heel elasticity combined with better step in comfort.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Stronger skiers will appreciate that the PT 16 has all the performance and retention of a top Marker Alpine binding for powerful skiing anywhere on the mountain and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 6-16Brake Width: 100, 125Weight: 1350Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The Inter Pivot 3 Freeride Heel of the Duke 16 has improved power transmission, energy absorption and vertical heel elasticity combined with better step in comfort.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Stronger skiers will appreciate that the PT 16 has all the performance and retention of a top Marker Alpine binding for powerful skiing anywhere on the mountain and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 6-16Brake Width: 100, 125Weight: 1350Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
AddThis
AddThis

Copyright Interhike. All rights reserved.