Compare Prices on Outdoor Equipment



⌄


Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings

Add Interhike.com search to your browser
Products available in:

Bindings - Compare Prices

Hide Product Images Hide Product Images
Product
Price
Buy
Buy From...
Brakes for Marker Alpinist binding. If you're prepared to sacrifice some weight saving, the Alpinist binding has specific brakes that add extra safety. Choice of two sizes 90mm or 105mm; sold in pairs. [Full Details]
If you are looking for a binding to complete your first freestyle or freeride set-up then the Marker Squire 10 is a great option at an affordable price. It goes down to a DIN 3 which is great for junior rippers or beginner lighter adults who need low release values and up to 10 for slightly more advanced riders. The compact heel uses a lightweight construction to keep everything feeling playful and easy to manoeuvre. If you are heading off-piste and into the trees for the first time or attempting a new trick these bindings will keep you safe without busting the bank. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.General InformationDIN / Release Value: 3-10Brake Width: 100Weight: 815Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Griffon is based very closely on the Jester but is both lighter and has a lower DIN range, which better suits the majority of skiers. Like its bigger brother it's a go-to choice for freeskiers who demand performance. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Compatible with Alpine, GripWalk and Tour certified soles.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeConfident skiers wanting a binding that will work with any certified boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Inter Pivot 3 Freeride HeelThe third and newest generation : improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 23223).AFD Gliding PlateA moveable AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.General InformationDIN / Release Value: 4-13Brake Width: 90, 100, 110, 120Weight: 1018Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, AFD Gliding PlateCLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.SpecificationDIN / Release Value: 4-12Brake Width: 100Weight: 1090 (SML), 1110 (LRG)Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty : Yes (specific model)Boot Lengh : 264 - 327 mm, 304 - 367 mmColour: Black / Anthracite [Full Details]
The choice of freeskiers who demand superior performance, the Jester ID is compatible with Alpine, GripWalk and Tour certified soles. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Never before seen performance in a binding this weight.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium PartsMagnesium sole holders in the toe combinded with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 6-16Brake Width: 100, 110Weight: 1070Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black/grey [Full Details]
The choice of freeskiers who demand superior performance, the Jester ID is compatible with Alpine, GripWalk and Tour certified soles. The toe and heel pieces save weight, increase stiffness and boost power transmission compared to the previous model. The Triple Pivot elite Toe uses a across-axis toe spring for higher energy absorption; the Inter Pivot 3 Freeride Heel has better vertical elasticity. Never before seen performance in a binding this weight.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium PartsMagnesium sole holders in the toe combinded with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding.SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 6-16Brake Width: 100, 110Weight: 1070Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black/grey [Full Details]
The Alpinist 10 is Marker's take on the super light pin sector. The relatively wide 38mm drill pattern provides excellent power transmission; the simple design means no unnecessary grams. A carbon reinforced toe with twin springs and integrated rubber pads add strength and keeps the weight down.OverviewBinding TypeBackcountry PinBoot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and reliability. The Pin set up of the Alpinist saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable and tough.Key FeaturesSKIING, Active Length CompensationActive length compensation in the heel allows the heel to move back up to 4 mm when the ski is flexed, helping to maintain a consistent pressure.SKIING, Carbon Reinforced Toe The toe uses carbon fibre reinforced material for improved stiffness and response whilest skiing downhill yet keeping the weight down for the climb up.SKIING, Alpinist HeelAdjustable lateral release values to suit your skiing and 15mm of heel adjustment range (+-7.5mm).CLIMBING, Climbing AidsNeutral walking mode and two climbing aids offering 5° and 9°. The fast shift mode enables quick shifting between 0° and 9° without the need to rotate the heel.CLIMBING, Anti Ice PadsClimbing: Anti Ice Pads in the base of toe and heel (if no brake is installed) to prevent icing in critical areas to increase binding function and safety.General InformationDIN / Release Value: 6-12Brake Width: optional extraWeight: 245Boot Sole Standard Compatibility: PinCert, PinStand Height: 18mmAvailable Adjustment: 15mmClimbing Positions: 0°, 5°, 9°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Marker Jester 18 Pro ID is all about bomb proof build quality and a high DIN for skiers who ride fast and stomp hard landings. They use strong yet lightweight magnesium parts so they will take all the bumps and knocks that chargey skiers or hardcore freestylers deal out to their kit. The Inter Pivot 3 Freeride Heel has some of the best heel elasticity on the market and the Triple Pivot elite Toe has some clever geometry that improves boot-binding retention even further, making sure you don't pre-release on big landings and ride away even if you don’t land perfectly. They also have Sole.ID meaning compatibility issues are a thing of the past. If your motto is 'go big or go home', these are the bindings for you.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption reducing the risk of early release. The large supporting surface optimises the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Magnesium Parts Magnesium sole holders in the toe combined with a magnesium heel housing provide the solid construction for the hardest charging freeride athletes.Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent safety for downhill skiing.Anti Ice RailUse the metal rail on the toe piece to scratch off ice and snow below your boot sole to easily step into the binding. SOLe.IDHeight-adjustable gliding plate that is hassle-free to adjust making it compatible with alpine soles (ISO 5355) and touring/GripWalk (ISO 9523).General InformationDIN / Release Value: 8-18Brake Width: 110Weight: 1105Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Tan [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, AFD Gliding PlateA moveable AFD (anti friction device) supports a precise, consistant release almost entirely unhindered by dirt, snow, ice or boot sole.CLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.General InformationDIN / Release Value: 4-12Brake Width: 100Weight: 1096Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: 264 - 327 mm [Full Details]
The Tour F12 ePF adds muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide ePF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide.OverviewBinding TypeBackcountry Frame (Multi Norm)Boot Compatibility It's a Multi Norm binding so it will accept Alpine, Tour, GripWalk, WTRSkier TypeBackcountry, Tourers. Frame bindings are simple to use and a good choice for skiers who want the safety of alpine release functions on the way down. They work with a variety of boots, making them a great choice for anyone who doesn't want to swap to boots with Pin inserts. They are a bit heavier than other systems, so suit someone who isn't obsessed with speed on the ascent. The ePF version requires a ski over 88mm in the waist meaning it wil appeal to skiers where the descent is an improtant part of the day and they prefer a wider ski with more float.Key FeaturesSKIING, ePF - extended Power FrameThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, Hollow Linkage HeelThe power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.SKIING, AFD Gliding PlateA moveable AFD (anti friction device) supports a precise, consistant release almost entirely unhindered by dirt, snow, ice or boot sole.CLIMBING, Hollow TechThe fibre-reinforced frame base plate provides impressive rigidity and stability, yet very light for climbing due to the gas injected hollow construction.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.General InformationDIN / Release Value: 4-12Brake Width: 100Weight: 1096Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 36mmAvailable Adjustment: 60mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: 304 - 367 mm [Full Details]
The Marker Kingpin 13 rewrote the rules when it came to bindings, blurring the lines between tradtional alpine bindings and lightweight tour bindings. This season it uses the same legendary features that has made it one of the best hybrid bindings on the market, but adds a slight update to the toe. This year Marker have introduced an integrated stop in the toe that makes boot-binding location much easier when stepping in. It still uses the alpine heel for the best performance, response and added saftey on the way down and a pin toe for weight saving and maximum efficiency on the way up. They still remain one of the best choices for adventurous skiers who need a binding that works well on the ascent to then ski hard on the way back down.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able to rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. Long climbs are a part of the experience.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 6-13Brake Width: 100, 125Weight: 690Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
The Marker Kingpin 13 rewrote the rules when it came to bindings, blurring the lines between tradtional alpine bindings and lightweight tour bindings. This season it uses the same legendary features that has made it one of the best hybrid bindings on the market, but adds a slight update to the toe. This year Marker have introduced an integrated stop in the toe that makes boot-binding location much easier when stepping in. It still uses the alpine heel for the best performance, response and added saftey on the way down and a pin toe for weight saving and maximum efficiency on the way up. They still remain one of the best choices for adventurous skiers who need a binding that works well on the ascent to then ski hard on the way back down.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able to rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. Long climbs are a part of the experience.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 6-13Brake Width: 100, 125Weight: 690Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 4-12Brake Width: 100, 125Weight: 1180Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 4-12Brake Width: 100, 125Weight: 1180Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker pushed existing technology to max out the possibilities and create the Kingpin M-Werks 12. Taking all the best bits of the standard version they've added a carbon reinforced pin toe and heel, new ergonomic ski/walk lever and climbing aids, and a new XXL Power Transmitter. The result is a lighter, more precise and more responsive binding that ascends with ease and attacks the descent.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. The M-Werks takes this even further than the standard Kingpin with more Carbon used and more grams saved.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 5-12Brake Width: 100, 125Weight: 630Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The Inter Pivot 3 Freeride Heel of the Duke 16 has improved power transmission, energy absorption and vertical heel elasticity combined with better step in comfort.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Stronger skiers will appreciate that the PT 16 has all the performance and retention of a top Marker Alpine binding for powerful skiing anywhere on the mountain and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 6-16Brake Width: 100, 125Weight: 1350Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The Inter Pivot 3 Freeride Heel of the Duke 16 has improved power transmission, energy absorption and vertical heel elasticity combined with better step in comfort.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Stronger skiers will appreciate that the PT 16 has all the performance and retention of a top Marker Alpine binding for powerful skiing anywhere on the mountain and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Inter Pivot 3 Freeride HeelThe third and newest generation: improved power transmission, energy absorption and vertical heel elasticity combined with an improved step in comfort. The main pivot in the heel sits in the heart of the heel piece and ensures excellent saftey for downhill skiing.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 6-16Brake Width: 100, 125Weight: 1350Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
AddThis
AddThis

Copyright Interhike. All rights reserved.