Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Bindings
Products available in:
This week's most popular products:
The Squire is the leading lightweight binding for skiers who don't want to skimp on quality. The redesigned Triple Pivot Lite 2 toe and Hollow Linkage 2 heel section save weight and maximise power transmission to the ski. The Ice-Off Rail allows ice and snow to be scraped off from the bottom of boots which otherwise will compromise binding performance. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeSkiers looking for a lower DIN range and a lighter binding that is still high performing whether on the piste, in the park or riding all mountain.Key FeaturesTriple Pivot elite ToeThe toe construction allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and, with a sole plate inclined by 5°, it provides high energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.Hollow Linkage 2 HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity. This new version requires 30% less effort to step-in and has easier entry for GripWalk soles.AFD Gliding PlateThe Marker AFD (anti friction device) supports a precise consistant release almost entirely unhindered by dirt, snow, ice or boot sole.Ice-Off RailScrape off snow and ice from the bottom of the boot.General InformationDIN / Release Value: 3-11Brake Width: 90, 100Weight: 820Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 24mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: black [Full Details]
The new Salomon STH2 16 MNC builds on the build quality of previous models using a steel, aluminium and glass fibre PA construction to make them tough yet light. However, this new version uses some clever technology that allows you to dial in the performance to suit your riding style or terrain. A switch on the heel changes the heel elasticity; reduce it to make the binding interface feel more precise and quicker to respond which is great on-piste, or increase it to make them better suited to absorb bigger knocks and impacts when you're riding in the park or playing in the powder. A patented 3D Driver toe with multi-directional release adds extra safety and is also Multi Norm Compatible too meaning you don't have to worry if your boot is alpine, GripWalk or tour certified. Just click in and go.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalk, WTR, TourSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. XL WingsLong wings envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings.+elastic travelThe ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.Low profile ChassisLow stand height for increased terrain feedback and enhanced power transmission.Dual Transfer SwitchUse the dial on the heel switch to increase elastic return for better shock absorption or reduce it to make the transfer of power more immediate for increased response from your skis.General InformationDIN / Release Value: 7-16Brake Width: 100, 115Weight: 1240Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTRStand Height: 22mmAvailable Adjustment: 28mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: red [Full Details]
The Salomon MTN Pure is a hassle-free and lightweight tech binding for alpine touring – weighing in at just 305g per pair with the included leash. It’s durable and easy to use, featuring a patented step-in aid at the front so your boot is automatically positioned to click in. The two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Performance-wise the Backland Pure is exceptional, with a broad 40mm mounting for maximum power transmission on wide skis (this also reduces the risk of the screws pulling out) and has a lengthy 30mm sole-length adjustment. Crampons and brakes are both are available as extras, in 90mm, 100mm and 110mm widths.OverviewBinding TypeBackcountry PinBoot Compatibility Pin only. They'll work with all boots that have pin hardware installedSkier TypeTourers. Skiers looking for lightweight and convenience. The Pin set up of the Pure saves plenty of weight for long ascents and big days, and still ensures good performance on the way down. The design has proven itself to be durable, tough and easy to use.Key FeaturesSKIING, Wide Screw PatternBetter energy transmission.CLIMBING, Step-In AidSalomon's step-in aid guides position your boot perfectly.CLIMBING, easy Climbing AidsThe climbing aids work separately from the heel tower. This means they can be folded forward into any heel-rotation position. With a flick of your pole, you have hasslefree and easy switching between the three climbing positions.General InformationDIN / Release Value: N/ABrake Width: optional extraWeight: 295Boot Sole Standard Compatibility: PinCert, PinStand Height: 30.5mmAvailable Adjustment: 30mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black/titan [Full Details]
The Marker Kingpin 13 rewrote the rules when it came to bindings, blurring the lines between tradtional alpine bindings and lightweight tour bindings. This season it uses the same legendary features that has made it one of the best hybrid bindings on the market, but adds a slight update to the toe. This year Marker have introduced an integrated stop in the toe that makes boot-binding location much easier when stepping in. It still uses the alpine heel for the best performance, response and added saftey on the way down and a pin toe for weight saving and maximum efficiency on the way up. They still remain one of the best choices for adventurous skiers who need a binding that works well on the ascent to then ski hard on the way back down.OverviewBinding TypeBackcountry PinCertBoot Compatibility PinCert. Boot must have pin inserts at the toe and need to meet boot ISO Norms for Alpine (ISO 5355), GripWalk (ISO 23223 ) or Tour (ISO 9523) for the heel to function.Skier TypeFreerider, Backcountry, Tourers. Skiers who want to be able to rip on the descents and need a binding that they can trust to retain the boot but release when it is necessary. They also want to keep things as light as possible when ascending. Long climbs are a part of the experience.Key FeaturesSKIING, XXL Power Transmitterextra large power transmitters with low weight wheels that provide minimal friction and maximum centering of the boot heel, allowing easy return to centre if knocked out of line.SKIING, Vertical and Lateral Adjustable Release FunctionVertical and lateral, individually adjustable release in the heel for improved release functionality.SKIING, Carbon Reinforced Tow and HeelCarbon reinforced toe and heel material for improved strength and reduced weight.CLIMBING, Climbing AidsThe climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional 'clack' and allow more comfortable hiking.CLIMBING, Cramponeasy to install crampons for in the sizes 90mm, 105mm, 120mm.General InformationDIN / Release Value: 6-13Brake Width: 100, 125Weight: 690Boot Sole Standard Compatibility: PinCert. Pin inserts with either Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTRStand Height: 25mmAvailable Adjustment: 25mmClimbing Positions: 0°, 7°, 13°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Bindings - Compare Prices
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
The Armada Strive 14 GW is for those skiers after a binding with a higher DIN setting yet don't want anything too heavy for their set-up. Using a lightweight and durable polyamide glass fibre construction for the main body means they are excellent at taking the knocks, bumps and scrapes adventurous skiers tend to subject their kit to but allows the feeling of the skis and conditions they are on really transmit through. Add in the LDN toe piece which uses an ultra-low stance height and extra wide platform to provide a feeling of absolute stability and power on tap and you have a binding that is perfect for charging around resort but without the weight of some of the higher DIN models.OverviewBinding TypeMulti Norm AlpineBoot Compatibility Alpine, GripWalkSkier TypeConfident skiers wanting a binding that will work with any Alpine and GripWalk boot soles as well as higher DIN settings and good retention, without choosing the heaviest or highest DIN setting options.Key Featuresextra-Wide Toe PedalA super-wide pedal ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. LDN ToeThis revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain.Automatic Wing & Toe adjustmentNo adjustments needed to adapt the wings and toe-height to your boots. Just step-in and ski! XL WingsLong wings that envelop the tip of the boot perfectly to provide increased power transmission and confidence in freeride bindings. General InformationDIN / Release Value: 5-14Brake Width: 100Weight: 980Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 20mmAvailable Adjustment: 30mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: sand [Full Details]
The Armada Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100, 110Weight: 865Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Armada Shift 10 takes all the best parts of the revolutionary Shift 13 to create lighter a lower DIN version that better suits lighter or less agressive skiers. It still blends the effeciency of the the best uphill bindings with the performance of an Alpine binding on the descent. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill model. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. With a lower DIN range, this 10 version of the Shift is ideal for lighter or less agressive skiers who still want a binding with proper alpine performance on the descent and for it still able to cope with ascents better than many tour specific models. The skiing will always be the priority but hiking for new experiences and better conditons is an important part of the day.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 4-10Brake Width: 100, 110Weight: 865Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
The Armada Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.General InformationDIN / Release Value: 6-13Brake Width: 110, 120Weight: 868Boot Sole Standard Compatibility: Alpine (ISO 5355), Tour (ISO 9523), GripWalk (23223), WTR. Pin inserts are required for ascendingStand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/AColour: black [Full Details]
Copyright Interhike. All rights reserved.