The Look Pivot is one of the most iconic bindings when it comes to freestyle or freeride set-ups and the Pivot 15 uses all the design safety and construction from its bigger brother, but in a lower DIN value range. A combination of aluminium and steel parts will take all the abuse that park or freeride skiers dish out, yet also offer some of the best safety available on the market with multiple directions of realease reducing the risk of serious injury. They also boast some of the highest amounts of elasticity for boot retention and this is what stops pre-releasing from skis when landings are anything other than perfect. If lapping parks is your thing and you like to spend time jibbing everywhere else, the Pivot 15 will help keep you connected to your skis yet safe. OverviewBinding TypeGripWalk AlpineBoot Compatibility Alpine, GripWalkSkier TypeHeavier and stronger skiers wanting a higher DIN range for the best retention. Tough construction does increase the weight but more importanly improves resilience whether skiing in the park or freeriding.Key FeaturesLong elastic TravelLonger elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Race Aluminium ToeFeaturing 45mm of elastic travel and 180 degree multi-directional release (lateral and vertical), the all-metal Race toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Turntable heel The Pivot binding has a turntable heel piece that swivels around the tibia axis, allowing for greater safety and reducing the risk of injury. General InformationDIN / Release Value: 6-15Brake Width: 95, 115Weight: 1245Boot Sole Standard Compatibility: Alpine (ISO 5355), GripWalk (23223)Stand Height: 19mmAvailable Adjustment: 20mmClimbing Positions: N/ACrampon Compatibilty: N/ABoot Lengh: N/AColour: Forza 3.0 [Full Details]
The Shift introduced the next generation of freeride capability and still leads the way, blending the efficiency of the best uphill bindings with the power and precision of the leading alpine models. The toe piece has the advantages of a pin binding allowing for convenient hiking but can be shifted to become a downhill binding. A true a high-performance freeride option with certified DIN alpine heel and toes and full compatibility to all DIN ISO norm boots. It moves between the Alpine and Tour categories like nothing else out there. OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. The light weight, 13 DIN and full alpine release make this ideal for skiers who want the safety of an alpine binding and the uphill capacity of a tour model. It can charge on the descent just like the best alpine options and, with a quick flick of the switch, it'll tackle ascents with more finesse than many BC bindings.Key FeaturesSKIING, XL WingsLong wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride terrain.SKIING, elastic Travel47mm of elastic travel on the wings, holds the boot back when faced with bigger shocks and minimizes the risk of pre-release.SKIING/CLIMBING, Shift Toe PieceA simple push of a button effortlessly turns the toe of this binding from a solid down hill binding into an efficient pin toe system for climbing.CLIMBING, Hike & Ride Switch A flip over lever on the heel easily locks the brakes up and out of the way, giving a 2 degree climbing angle.CLIMBING, Climbing AidsClimbing: If the 2° angle isn't enough then a simple flick of the climbing aid changes it to 10°.SpecificationDIN / Release Value: 6-13Brake Width: 110Weight: 885Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 30mmAvailable Adjustment: 30mmClimbing Positions: 2°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Blue [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk 23223, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function, a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. General InformationDIN / Release Value: 4-12Brake Width: 100, 125Weight: 1180Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty: Yes (specific model)Boot Lengh: N/A [Full Details]
Marker's Duke PT takes a radical approach to combining top alpine performance with lightweight ascending by using an innovative Ride & Hike toe. For walking, the upper part is unlocked and removed revealing a pin system, the upper section is then stored in a backpack. For the descent the upper jaw is locked back into place and the binding becomes a high-performance alpine unit that will take on any terrain. The PT 12 uses the Hollow Linkage Heel that is lighter than the version on the PT 16 but retains excellent torsional strength and a robust construction. The DIN range on this model starts lower and doesn't go as higher, better suiting lighter or less aggressive skiers.OverviewBinding TypeBackcountry Hybrid (Multi Norm Alpine on descent and PinCert on ascent)Boot Compatibility In Alpine mode it will accept boots with any DIN standard (Alpine ISO 5255, Tour ISO 9523, GripWalk, WTR), this does exclude the lightest models of pin boot that fall outside of DIN Norms. To use the climbing function a boot with pin inserts at the toe is required.Skier TypeFreerider, Backcountry. Skiers where the descent is the most important part but they're prepared to skin to get there. The DIN range of the PT 16 won't work for a lot of skiers who are lighter or less agressive. So, the PT 12 has the performance and retention you expect of a Marker Alpine binding and, with a simple unlocking mechanism, can be converted to a highly effecient Pin model for ascending.Key FeaturesSKIING, Auto Quad LockThe alpine toe part locks itself at 4 different points automatically when stepping into the binding to ensure maximum safety.SKIING, Hollow Linkage HeelThe Hollow Linkage Heel optimises retention for alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The robust construction suits even the most strenuous activity.SKIING, Anti Ice RailA metal rail on the toe piece can be used to scratch off ice and snow below your boot sole to easily step into the binding.SKIING/CLIMBING, Ride & Hike Toe All the Marker Royal Family downhill performance and boot retention you'd expect with a releasable housing to reveal pin-technology for strong and efficient uphill performance. To use the walking mode, the upper part of the toe is simply unlocked, tilted forward and removed, this uncovers the pin binding. Unclipping and removing the upper section saves 300g per foot. When it's time to ski, the top section is clipped back to the base plate, secure by the Auto Quad Lock technology.CLIMBING, Lock & Walk BrakeA simple flick of a switch in the brake effortlessly locks the brakes out of the way and Includes a neutral walking mode and 10° climbing aid. SpecificationDIN / Release Value: 4-12Brake Width: 110Weight: 1180Boot Sole Standard Compatibility : Alpine (ISO 5355), Tour (ISO 9523), GripWalk, WTR. Pin inserts are required for ascending.Stand Height: 24mmAvailable Adjustment: 60mmClimbing Positions: 0°, 10°Crampon Compatibilty : Yes (specific model)Boot Lengh : N/AColour: Black / Red [Full Details]