Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£241.5
From Ellis Brigham
The RC4 The Curv One 110 will appeal to good intermediate and advanced skiers who are looking for a higher volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is enhanced further by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: making it thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 110, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 110Last Width: 101 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1980 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
With the latest version of the Blanca, Apex rip up the rule book on making ski boots and seriously challenge the traditional brands when it comes to performance and comfort. Their unique system of stiff frame and separate walkable boot set them apart. The frame provides the rigidity, power and precision for skiing, as well as adding customisation through adjustable lean and flex. The walkable boot has a 2 Boa system for an even closure and a heat mouldable liner for the best fit. Step in and ski; step out to walk more comfortably than in any plastic boot.Ability LevelBoots9OverviewFitFeels surprisingly snug, provides firm heel and ankle hold with a medium width on the forefoot. Adjustable instep and rachet straps give flexibilty for height over the instep.ShellOpen Chassis. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerCustom Fit, mouldable. A high-quality liner is critical to any ski boot. The Apex Custom-Fit liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points thanks to two separate Boa zones and 14 points of closure. Locks into the Chassis for a solid connection to your skis.Boa Fit ClosureApex design incorporates the game-changing Boa reel and stainless steel cable lacing system to provide precise control by locking your foot firmly into the heel pocket. This is a powerful, lightweight closure system with micro-adjustability to create a glove-like fit where adjustments can be made quickly on the fly.General InformationCategory: AlpineFlex: 85/95/105Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2722 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
With the latest version of the Blanca, Apex rip up the rule book on making ski boots and seriously challenge the traditional brands when it comes to performance and comfort. Their unique system of stiff frame and separate walkable boot set them apart. The frame provides the rigidity, power and precision for skiing, as well as adding customisation through adjustable lean and flex. The walkable boot has a 2 Boa system for an even closure and a heat mouldable liner for the best fit. Step in and ski; step out to walk more comfortably than in any plastic boot.Ability LevelBoots9OverviewFitFeels surprisingly snug, provides firm heel and ankle hold with a medium width on the forefoot. Adjustable instep and rachet straps give flexibilty for height over the instep.ShellOpen Chassis. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerCustom Fit, mouldable. A high-quality liner is critical to any ski boot. The Apex Custom-Fit liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points thanks to two separate Boa zones and 14 points of closure. Locks into the Chassis for a solid connection to your skis.Boa Fit ClosureApex design incorporates the game-changing Boa reel and stainless steel cable lacing system to provide precise control by locking your foot firmly into the heel pocket. This is a powerful, lightweight closure system with micro-adjustability to create a glove-like fit where adjustments can be made quickly on the fly.General InformationCategory: AlpineFlex: 85/95/105Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2722 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
With the latest version of the Blanca, Apex rip up the rule book on making ski boots and seriously challenge the traditional brands when it comes to performance and comfort. Their unique system of stiff frame and separate walkable boot set them apart. The frame provides the rigidity, power and precision for skiing, as well as adding customisation through adjustable lean and flex. The walkable boot has a 2 Boa system for an even closure and a heat mouldable liner for the best fit. Step in and ski; step out to walk more comfortably than in any plastic boot.Ability LevelBoots9OverviewFitFeels surprisingly snug, provides firm heel and ankle hold with a medium width on the forefoot. Adjustable instep and rachet straps give flexibilty for height over the instep.ShellOpen Chassis. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerCustom Fit, mouldable. A high-quality liner is critical to any ski boot. The Apex Custom-Fit liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points thanks to two separate Boa zones and 14 points of closure. Locks into the Chassis for a solid connection to your skis.Boa Fit ClosureApex design incorporates the game-changing Boa reel and stainless steel cable lacing system to provide precise control by locking your foot firmly into the heel pocket. This is a powerful, lightweight closure system with micro-adjustability to create a glove-like fit where adjustments can be made quickly on the fly.General InformationCategory: AlpineFlex: 85/95/105Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2722 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
With the latest version of the Blanca, Apex rip up the rule book on making ski boots and seriously challenge the traditional brands when it comes to performance and comfort. Their unique system of stiff frame and separate walkable boot set them apart. The frame provides the rigidity, power and precision for skiing, as well as adding customisation through adjustable lean and flex. The walkable boot has a 2 Boa system for an even closure and a heat mouldable liner for the best fit. Step in and ski; step out to walk more comfortably than in any plastic boot.Ability LevelBoots9OverviewFitFeels surprisingly snug, provides firm heel and ankle hold with a medium width on the forefoot. Adjustable instep and rachet straps give flexibilty for height over the instep.ShellOpen Chassis. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerCustom Fit, mouldable. A high-quality liner is critical to any ski boot. The Apex Custom-Fit liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points thanks to two separate Boa zones and 14 points of closure. Locks into the Chassis for a solid connection to your skis.Boa Fit ClosureApex design incorporates the game-changing Boa reel and stainless steel cable lacing system to provide precise control by locking your foot firmly into the heel pocket. This is a powerful, lightweight closure system with micro-adjustability to create a glove-like fit where adjustments can be made quickly on the fly.General InformationCategory: AlpineFlex: 85/95/105Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2722 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The VS is Apex's newest version of the innovative and popular Antero. This latest model is lighter and shorter, with better closure but the same impressive performance and ease of use.Apex boots deliver all the performance you demand but their unique design adds comfort and convenience you wouldn't expect. The obvious thing is that it doesn't use a full plastic shell. The open chassis construction has a rigid outer skeleton that powers and drives the skis, with a separate Walkable Boot that sits inside this frame. It uses three clips to secure the boot and can be tuned to each skier via an adjustable forward lean, three position flex and dual cuff alignment. The liner uses a multi-density heat mouldable foam that can be shaped to better fit the skier's foot for the best comfort and precision. Simple to use, but effective, Two-Zone Double-Stackl Boa closure systems ensure good wrap and an even pressure thanks to the Serpentine lacing system.The Walkable Boot makes getting to and from resort easy and uses Vibram's renowned winter-gripping Ice Trek outsole. No more slipping and sliding in rigid plastic boots with no grip and more comfort than your traditional ski boot.Ability LevelOverviewFitSurprisingly snug, provides firm heel and ankle hold, a medium width on the forefoot and the BOA + rachet straps give flexibilty for height over the instep.ShellOpen Chassis. New Nanolite Carbon chassis for lightweight, high-modulus support. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerMulti-density design with new QPlush high resiliency foam, mouldable. A high-quality liner is critical to any ski boot. The Apex liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort. The liner sits in the Walkable Boot, a snowboard style of outer boot that uses a Two-Zone Double-Stack Boa design with Serpentine lacing system. This provides a more secure and comfortable closure over your instep. The Serpentine lacing acts as a pully system, drawing the tongue down over your instep instead of pushing down like traditional cross lacing. Maximum heel retention is the result.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points. Locks into the Chassis for a solid connection to your skis.Open Heel DesignPositions the walking boot back into the ultra-secure Vault System providing immediate responsiveness and a shorter boot sole length.Integrated Heel Cup & BridgeReduced weight and streamlined structure of the chassis creating The Vault.Carbon Reinforced Flex ArmAdjusts forward lean and flex range.Articulating Swing StrapsPivot out of the way for super easy entry into the chassis.Double Stack Boa SystemPowerful lower leg grip and heel retention provided by 20 points of closure for a custom fit every time.General InformationCategory: AlpineFlex: 115/125/135Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2948 (1/2 pair size 27.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The VS is Apex's newest version of the innovative and popular Antero. This latest model is lighter and shorter, with better closure but the same impressive performance and ease of use.Apex boots deliver all the performance you demand but their unique design adds comfort and convenience you wouldn't expect. The obvious thing is that it doesn't use a full plastic shell. The open chassis construction has a rigid outer skeleton that powers and drives the skis, with a separate Walkable Boot that sits inside this frame. It uses three clips to secure the boot and can be tuned to each skier via an adjustable forward lean, three position flex and dual cuff alignment. The liner uses a multi-density heat mouldable foam that can be shaped to better fit the skier's foot for the best comfort and precision. Simple to use, but effective, Two-Zone Double-Stackl Boa closure systems ensure good wrap and an even pressure thanks to the Serpentine lacing system.The Walkable Boot makes getting to and from resort easy and uses Vibram's renowned winter-gripping Ice Trek outsole. No more slipping and sliding in rigid plastic boots with no grip and more comfort than your traditional ski boot.Ability LevelOverviewFitSurprisingly snug, provides firm heel and ankle hold, a medium width on the forefoot and the BOA + rachet straps give flexibilty for height over the instep.ShellOpen Chassis. New Nanolite Carbon chassis for lightweight, high-modulus support. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerMulti-density design with new QPlush high resiliency foam, mouldable. A high-quality liner is critical to any ski boot. The Apex liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort. The liner sits in the Walkable Boot, a snowboard style of outer boot that uses a Two-Zone Double-Stack Boa design with Serpentine lacing system. This provides a more secure and comfortable closure over your instep. The Serpentine lacing acts as a pully system, drawing the tongue down over your instep instead of pushing down like traditional cross lacing. Maximum heel retention is the result.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points. Locks into the Chassis for a solid connection to your skis.Open Heel DesignPositions the walking boot back into the ultra-secure Vault System providing immediate responsiveness and a shorter boot sole length.Integrated Heel Cup & BridgeReduced weight and streamlined structure of the chassis creating The Vault.Carbon Reinforced Flex ArmAdjusts forward lean and flex range.Articulating Swing StrapsPivot out of the way for super easy entry into the chassis.Double Stack Boa SystemPowerful lower leg grip and heel retention provided by 20 points of closure for a custom fit every time.General InformationCategory: AlpineFlex: 115/125/135Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2948 (1/2 pair size 27.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The VS is Apex's newest version of the innovative and popular Antero. This latest model is lighter and shorter, with better closure but the same impressive performance and ease of use.Apex boots deliver all the performance you demand but their unique design adds comfort and convenience you wouldn't expect. The obvious thing is that it doesn't use a full plastic shell. The open chassis construction has a rigid outer skeleton that powers and drives the skis, with a separate Walkable Boot that sits inside this frame. It uses three clips to secure the boot and can be tuned to each skier via an adjustable forward lean, three position flex and dual cuff alignment. The liner uses a multi-density heat mouldable foam that can be shaped to better fit the skier's foot for the best comfort and precision. Simple to use, but effective, Two-Zone Double-Stackl Boa closure systems ensure good wrap and an even pressure thanks to the Serpentine lacing system.The Walkable Boot makes getting to and from resort easy and uses Vibram's renowned winter-gripping Ice Trek outsole. No more slipping and sliding in rigid plastic boots with no grip and more comfort than your traditional ski boot.Ability LevelOverviewFitSurprisingly snug, provides firm heel and ankle hold, a medium width on the forefoot and the BOA + rachet straps give flexibilty for height over the instep.ShellOpen Chassis. New Nanolite Carbon chassis for lightweight, high-modulus support. This is a totally unique design that, unlike traditional full shell plastic boots, is just a frame. In addition to the comfort this can provide, it also offers a customisable flex that is independent of fit, along with superior stability and precise edge control, plus an adjustable flex-arm with four forward lean positions. The lateral stiffness of the chassis and cuff provide a direct connection to your skis, providing powerful energy transmission and precise control.LinerMulti-density design with new QPlush high resiliency foam, mouldable. A high-quality liner is critical to any ski boot. The Apex liner can be heat moulded and fitted to meet your individual needs. Combined with the Walkable Boot, the Apex boot liner provides added warmth and comfort to enhance your ski experience. Uses an expanded neoprene toe-box for added comfort. The liner sits in the Walkable Boot, a snowboard style of outer boot that uses a Two-Zone Double-Stack Boa design with Serpentine lacing system. This provides a more secure and comfortable closure over your instep. The Serpentine lacing acts as a pully system, drawing the tongue down over your instep instead of pushing down like traditional cross lacing. Maximum heel retention is the result.Key FeaturesWalkable BootSnowboard boots have always featured a soft exterior and comfort that no ski boot could offer. Snowboarders could perform all day on the mountain, and then walk around at the end of the day in the same boots and never worry about loosening them up. The Apex Walkable Support Boot provides the comfort and warmth of a snowboard boot that you can ski in all day long. Separable from the Open Chassis, the Walkable Boot provides a full-traction outsole for getting to and from the mountain in comfort and safety and 360-degree support without pressure points. Locks into the Chassis for a solid connection to your skis.Open Heel DesignPositions the walking boot back into the ultra-secure Vault System providing immediate responsiveness and a shorter boot sole length.Integrated Heel Cup & BridgeReduced weight and streamlined structure of the chassis creating The Vault.Carbon Reinforced Flex ArmAdjusts forward lean and flex range.Articulating Swing StrapsPivot out of the way for super easy entry into the chassis.Double Stack Boa SystemPowerful lower leg grip and heel retention provided by 20 points of closure for a custom fit every time.General InformationCategory: AlpineFlex: 115/125/135Custom Shell: NoCustom Liner: YesPower Strap: n/aVolume: Medium-HighClips: 3 x Aluminium, Microadjustable, Inverted, plus 1 x Boa on Soft BootSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2948 (1/2 pair size 27.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
Copyright Interhike. All rights reserved.