Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£231
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Gold liner adds precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier’s foot is placed inside the complete boot whilst it cools. With the foot’s natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold W Thinsulate, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier’s feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: 40mmVolume: MediumClips: n/aSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1625Binding Compatibility: Alpine, Grip Walk, Walk To Ride, Multi Norm [Full Details]
£241.5
From Ellis Brigham
The RC4 The Curv One 110 will appeal to good intermediate and advanced skiers who are looking for a higher volume boot that doesn't sacrifice performance or hold back on custom fitting options. It uses Fischer's unique Vacuum moulding process that forms the shell to the skier's foot during the initial boot fit. This reduces pressure points and improves the foot hold at the same time; the comfort is enhanced further by the customisation of the heat moulded liner. It's also impressively light, thanks to clever engineering that alters the thickness of shell: making it thin where it needs to wrap, thicker where it supports.Ability LevelOverviewFitAverage around the heel and ankle with a slightly more generous feel on the forefoot and average instep height.Shell Vacuum HV shell, customisable.LinerRC4 The Curv One 110, customisable.Key FeaturesSomatecIn their natural, relaxed position, your feet form a V-shape. In this stance the knees remain parallel when flexed. Fischer took these anatomical facts into account when developing Soma-Tec. The feet remain relaxed in their natural V-position, so knee and ankle joints no longer have to be twisted inward and less strain is placed on the joints. At the same time, edge changes are made easier and energy is transmitted to the ski more accurately.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.SpecificationCategory: AlpineFlex: 110Last Width: 101 (+/- 3mm)Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x GT Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1980 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
The Maestrale XT is the new kid on the block from Scarpa, taking the best bits from the hugely successful Maestrale RS and tweaking them to boost freeride performance for tackling the steepest lines and fastest descents. It uses the same carbon infused Grilamid lower clog and adds a stiffer and stronger 2-buckle alpine unit, complete with beefy Booster power strap. Vibram soles increase grip, a Speedlock XT ski/walk mechanism is friction free and the Wave Closure System provides lightweight and secure closure. Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexiblity for volume over the top of the foot.Shell Carbon Grilamid LFT shell, Grilamid cuff, mouldable. The Carbon Grilamid Web Frame on the shell provides downhill power for responsive skiing, whilst remaining lightweight. The Grilamid Bi-Injection Overlap cuff promotes instant transmission; on the XT the cuff is larger than the RS version for a feel more similar to a traditional overlap . A Pebax Axial Alpine evo technology tongue blends overlap power and the ease of a cabrio style entry, resulting in more comfort, control and precision.LinerIntuition Cross Fit Pro Flex Ride, mouldable. Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. A super warm and lightweight Thermoformable liner, for superior comfort for perfectly matching the foot. Developed with specific flex zone for maximum agility and more comfort advantages in uphill.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismFriction free and rock solid for powerful skiing and a 56o range of motion when in walk mode.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.SpecificationCategory: BackcountryFlex: 130+Last Width: 101Custom Shell: noCustom Liner: yesPower Strap: CinchVolume: mediumClips: Sole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: yesRange Of Motion: 56Weight (g): 1490Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£500
From Ellis Brigham
The Maestrale Re-Made is based on the top selling Maestrale model, but this one is limited to just 2022 pairs and takes a new approach to materials. The shell, cuff and tongue are all made using scraps from production of previous boots, recycled and reworked to make this special version. It’s a new generation of product that follows a low impact philosophy where even the Velcro Power Strap is reworked to remove harmful materials such as PVC. And none of the good stuff is affected either, the blend of comfort, performance and convenience remain, whether going uphill or down. The same excellent Speed Lock Plus and Wave Closure System, and a fully customisable Intuition liner. Available exclusively at ellis Brigham in the UK.Ability LevelTour2OverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.ShellScarpa Re-Made Polymer shell, cuff and tongue. Production scraps are reused to reduce environmental impact whilst keeping quality and performance unaffected. The entire process is developed by the Scarpa Green Lab. The shell, cuff and tongue are made exclusively with recycled material coming from production scraps that have been collected over previous seasons.LinerPro Flex Touring, mouldable. Thermoformable liner made with Intuition foam, featuring anatomic tongue construction with an elastic band on the instep. Specific thermoformable heel inserts lock the ankle in place during skiing or touring. Double pull loops facilitate fitting. The fit is touring-oriented and comfortable right out of the box. For a more precise, high-performance fit we suggest thermomoulding before skiing.Key FeaturesRe-MadeThis material comes from production scraps used for realizing Maestrale. The plastic scraps are grinded and processed for injecting them and creating shell, cuff and tongue of this boot. University of Bologna's DICAM studies have pointed out that the emission of CO2 is reduced of 27% vs original version. Moreover, performances and quality are the same as the original.Wave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.HRS SystemThanks to the HRS and instep straps, heel security has become a SCARPA trademark. The instep strap configuration offers incredible fit for both touring comfort and downhill performance.General InformationCategory: BackcountryFlex: 110Last Width: 101Custom Shell: NoCustom Liner: YesVolume: MediumSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. A Grilamid/Carbon Grilamid LFT construction utilises Web Frame Design to save crucial weight without losing power. The boot is filled with features to make switching from ski to tour mode simple without ever having to take your gloves off: Speed Lock Plus, Wave Closure System and Thor Buckles. The Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexiblity for volume over the top of the foot.Shell Carbon Grilamid LFT shell, Grilamid cuff, mouldable. The Carbon Grilamid Web Frame on the shell provides downhill power for responsive skiing, whilst remaining lightweight. The Grilamid Bi-Injection Overlap cuff promotes instant transmission. A Pebax Axial Alpine evo tongue blends overlap power and the ease of a cabrio style entry.LinerIntuition Cross Fit Pro Flex, mouldable. Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. A super warm and lightweight Thermoformable liner, for superior comfort for perfectly matching the foot. Developed with specific flex zone for maximum agility and more comfort advantages in uphill.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock Plus Ski/Walk mechanismFriction free and rock solid for powerful skiing and a 60o range of motion when in walk mode.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: noCustom Liner: yesPower Strap: CinchVolume: mediumClips: Sole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: yesRange Of Motion: 60Weight (g): 1450Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. This latest version retains the Grilamid/Carbon Grilamid LFT construction that saves crucial weight without losing power, and now uses Grilamid BIO on the shell to maintain performance with a reduction in CO2 emissions during production. Speed Lock Plus and the Wave Closure System make switching from ski to tour mode simple; the Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.Shell Carbon Grilamid LFT and Grilamid shell, Grilamid BIO cuff, mouldable. Carbon Grilamid LFT is a polyamide reinforced with long carbon fibres that improve the elongation resistance properties and the rigidity of Grilamid, without increasing its density when compared with the normal short fibres. This allows a reduction in the thicknesses of the shell and cuff, creating a light product but at the same time still high performance. The Grilamid BIO cuff uses a high bio content polymer that ensures a significant reduction in Co2 emissions, with unchanged properties of stiffness, elasticity and high impact performance. A Pebax tongue blends overlap power and the ease of a cabrio style entry.LinerPro Flex Performance, mouldable. The Intuition thermoformable liner guarantees a precise, yet comfortable fit. Intuition liners ensure feet are kept warm and comfortable during extended use, without pressure points.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.Grilamid BIOGrilamid BIO is part of ems-Grivory's complete line of Greenline bio-based polyamides. This polymer with a high BIO content guarantees a significant reduction in CO2 emissions while maintaining its main properties of stiffness and elasticity and high impact unaltered. In fact, it derives from the synthesis of castor oil. The castor plant does not compete with food crops for the land and is grown in semi-arid areas (India, China, Brazil). It is, therefore, an excellent alternative to polymers derived from fossil sources and is completely recyclable and non-biodegradable.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: NoCustom Liner: YesPower Strap: 45mm Velcro with ReCCO Volume: MediumClips: 3 x Buckles, MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Speed Lock XTRange of Motion: 60Weight (g): 1450 (1/2 pair size 27.0)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. This latest version retains the Grilamid/Carbon Grilamid LFT construction that saves crucial weight without losing power, and now uses Grilamid BIO on the shell to maintain performance with a reduction in CO2 emissions during production. Speed Lock Plus and the Wave Closure System make switching from ski to tour mode simple; the Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.Shell Carbon Grilamid LFT and Grilamid shell, Grilamid BIO cuff, mouldable. Carbon Grilamid LFT is a polyamide reinforced with long carbon fibres that improve the elongation resistance properties and the rigidity of Grilamid, without increasing its density when compared with the normal short fibres. This allows a reduction in the thicknesses of the shell and cuff, creating a light product but at the same time still high performance. The Grilamid BIO cuff uses a high bio content polymer that ensures a significant reduction in Co2 emissions, with unchanged properties of stiffness, elasticity and high impact performance. A Pebax tongue blends overlap power and the ease of a cabrio style entry.LinerPro Flex Performance, mouldable. The Intuition thermoformable liner guarantees a precise, yet comfortable fit. Intuition liners ensure feet are kept warm and comfortable during extended use, without pressure points.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.Grilamid BIOGrilamid BIO is part of ems-Grivory's complete line of Greenline bio-based polyamides. This polymer with a high BIO content guarantees a significant reduction in CO2 emissions while maintaining its main properties of stiffness and elasticity and high impact unaltered. In fact, it derives from the synthesis of castor oil. The castor plant does not compete with food crops for the land and is grown in semi-arid areas (India, China, Brazil). It is, therefore, an excellent alternative to polymers derived from fossil sources and is completely recyclable and non-biodegradable.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: NoCustom Liner: YesPower Strap: 45mm Velcro with ReCCO Volume: MediumClips: 3 x Buckles, MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Speed Lock XTRange of Motion: 60Weight (g): 1450 (1/2 pair size 27.0)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. This latest version retains the Grilamid/Carbon Grilamid LFT construction that saves crucial weight without losing power, and now uses Grilamid BIO on the shell to maintain performance with a reduction in CO2 emissions during production. Speed Lock Plus and the Wave Closure System make switching from ski to tour mode simple; the Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.Shell Carbon Grilamid LFT and Grilamid shell, Grilamid BIO cuff, mouldable. Carbon Grilamid LFT is a polyamide reinforced with long carbon fibres that improve the elongation resistance properties and the rigidity of Grilamid, without increasing its density when compared with the normal short fibres. This allows a reduction in the thicknesses of the shell and cuff, creating a light product but at the same time still high performance. The Grilamid BIO cuff uses a high bio content polymer that ensures a significant reduction in Co2 emissions, with unchanged properties of stiffness, elasticity and high impact performance. A Pebax tongue blends overlap power and the ease of a cabrio style entry.LinerPro Flex Performance, mouldable. The Intuition thermoformable liner guarantees a precise, yet comfortable fit. Intuition liners ensure feet are kept warm and comfortable during extended use, without pressure points.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.Grilamid BIOGrilamid BIO is part of ems-Grivory's complete line of Greenline bio-based polyamides. This polymer with a high BIO content guarantees a significant reduction in CO2 emissions while maintaining its main properties of stiffness and elasticity and high impact unaltered. In fact, it derives from the synthesis of castor oil. The castor plant does not compete with food crops for the land and is grown in semi-arid areas (India, China, Brazil). It is, therefore, an excellent alternative to polymers derived from fossil sources and is completely recyclable and non-biodegradable.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: NoCustom Liner: YesPower Strap: 45mm Velcro with ReCCO Volume: MediumClips: 3 x Buckles, MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Speed Lock XTRange of Motion: 60Weight (g): 1450 (1/2 pair size 27.0)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Maestrale RS is a top selling AT model thanks to its blend of comfort on the ascent and total performance on the descent. This latest version retains the Grilamid/Carbon Grilamid LFT construction that saves crucial weight without losing power, and now uses Grilamid BIO on the shell to maintain performance with a reduction in CO2 emissions during production. Speed Lock Plus and the Wave Closure System make switching from ski to tour mode simple; the Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.Shell Carbon Grilamid LFT and Grilamid shell, Grilamid BIO cuff, mouldable. Carbon Grilamid LFT is a polyamide reinforced with long carbon fibres that improve the elongation resistance properties and the rigidity of Grilamid, without increasing its density when compared with the normal short fibres. This allows a reduction in the thicknesses of the shell and cuff, creating a light product but at the same time still high performance. The Grilamid BIO cuff uses a high bio content polymer that ensures a significant reduction in Co2 emissions, with unchanged properties of stiffness, elasticity and high impact performance. A Pebax tongue blends overlap power and the ease of a cabrio style entry.LinerPro Flex Performance, mouldable. The Intuition thermoformable liner guarantees a precise, yet comfortable fit. Intuition liners ensure feet are kept warm and comfortable during extended use, without pressure points.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.Grilamid BIOGrilamid BIO is part of ems-Grivory's complete line of Greenline bio-based polyamides. This polymer with a high BIO content guarantees a significant reduction in CO2 emissions while maintaining its main properties of stiffness and elasticity and high impact unaltered. In fact, it derives from the synthesis of castor oil. The castor plant does not compete with food crops for the land and is grown in semi-arid areas (India, China, Brazil). It is, therefore, an excellent alternative to polymers derived from fossil sources and is completely recyclable and non-biodegradable.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: NoCustom Liner: YesPower Strap: 45mm Velcro with ReCCO Volume: MediumClips: 3 x Buckles, MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Speed Lock XTRange of Motion: 60Weight (g): 1450 (1/2 pair size 27.0)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
The Gea RS has achieved legendary status among freeriders and tourers thanks to its lightness and uphill comfort along with firmness and control on the downhill. This latest version retains the Grilamid/Carbon Grilamid LFT construction that saves crucial weight without losing power, and now uses Grilamid BIO on the shell to maintain performance with a reduction in CO2 emissions during production. Speed Lock Plus and the Wave Closure System make switching from ski to tour mode simple; the Intuition liner is 100% mouldable for the best possible fit.Ability LevelOverviewFitFirm hold around the rear foot, medium width across the forefoot and over the instep but being a 3 piece shell there is some flexibility for volume over the top of the foot.Shell Carbon Grilamid LFT and Grilamid shell, Grilamid BIO cuff, mouldable. Carbon Grilamid LFT is a polyamide reinforced with long carbon fibres that improve the elongation resistance properties and the rigidity of Grilamid, without increasing its density when compared with the normal short fibres. This allows a reduction in the thicknesses of the shell and cuff, creating a light product but at the same time still high performance. The Grilamid BIO cuff uses a high bio content polymer that ensures a significant reduction in Co2 emissions, with unchanged properties of stiffness, elasticity and high impact performance. A Pebax Axial Alpine evo tongue blends overlap power and the ease of a cabrio style entry.LinerPro Flex Performance, mouldable. The Intuition thermoformable liner guarantees a precise, yet comfortable fit. Intuition liners ensure feet are kept warm and comfortable during extended use, without pressure points.Key FeaturesWave Closure SystemProvides a lightweight and secure closure, comfortably wrapping the foot.Speedlock XT Ski/Walk mechanismeasy to unlock and lock, thanks to a lever with an integrated pull loop it is even simple to use with gloves. The system is enhanced by the Friction Free technology, in fact, there isn't any connecting rod between the shell and cuff.ReCCO TechnologyWith the aid of ReCCO technology, rescue teams can track you in the event of an avalanche. The technology includes ReCCO reflectors attached to clothing, helmets, guards and boots, and ReCCO detectors used by over 800 rescue organisations worldwide. The reflectors and detectors allow users to track missing individuals thanks to the use of harmonic radar technology. ReCCO technology is an additional tool that can be used alongside avalanche transceivers, probes and rescue dogs. The technology enables rescue organisations to find buried or lost individuals quicker and to increase the chance of survival.Axial evo Alpine ConstructionCreating the best in touring comfort for the up and powerful responsiveness for the down, this unique Scarpa cabrio style design gives the best of both worlds. The forefoot and the cuff buckles, combined with the instep strap, allows you to easily adjust the volume, locking your foot in securely for the down while still being able to quickly open the boot to allow for a natural uphill stride.Grilamid BIOGrilamid BIO is part of ems-Grivory's complete line of Greenline bio-based polyamides. This polymer with a high BIO content guarantees a significant reduction in CO2 emissions while maintaining its main properties of stiffness and elasticity and high impact unaltered. In fact, it derives from the synthesis of castor oil. The castor plant does not compete with food crops for the land and is grown in semi-arid areas (India, China, Brazil). It is, therefore, an excellent alternative to polymers derived from fossil sources and is completely recyclable and non-biodegradable.SpecificationCategory: BackcountryFlex: 125Last Width: 101Custom Shell: NoCustom Liner: YesPower Strap: 45mm Velcro with ReCCO Volume: MediumClips: 3 x Buckles, MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Speed Lock XTRange of Motion: 60Weight (g): 1250 (1/2 pair size 25.0)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
What do you get if you cross a century worth of tour boot making knowledge with one of the world's best ski racers? The Scarpa 4-Quattro XT! Scarpa have teamed up with Bode Miller to produce the ultimate all-round boot that is just as at home skinning up as it is ripping off-piste or carving up groomers on the way back down. This 130 flex boot with Booster technology and the new Axial Alpine Hybrid closure system packs a serious punch and keeps the foot locked in for ultimate control which even the most charging of skiers will appreciate. Yet it also delivers on functionality and lightness for ascents with an impressive 61 degrees of movement and weighing in at just 1500g. Binding compatibility issues are almost a thing of the past as they have used a GripWalk sole unit and full tech inserts, so you get the most options when it comes to choosing your perfect set-up. If you want a boot that truly does everything, this is it. Ability LevelTour4OverviewFitMedium volume mid-foot with plenty of adjustment over the instep and snug heel hold thanks to the Alpine Axial Hybrid construction. ShellGrilamid BIO® produced from renewable, plant-based sources. The shell contains an over-injected carbon insert which improves impulse transmission to the skis, giving greater precision. Pebax tongue provides a lightweight but smooth flexing feel.Liner4PRO Flex XT. Desinged by Intuition, who make some of the best fully mouldable liners. These liners use a more supportive foam on the cuff for improved downhill performance. There’s also flexible neoprene sections behind the Achilles, and around the toes, for touring comfort.Key FeaturesGrilamid Bio Alpine Axial Hybrid The new Alpine Axial Hybrid closure system is specially designed for hybrid boots that can be used for both on-piste and off-piste skiing. Thanks to the straps installed on the tongue and linked at the mid-point of the shell, it provides a snug fit at the Presa SKI-01 sole The sole has an ergonomic design that guarantees excellent grip when walking or hiking, and is compatible with GripWalk certified downhill or ski touring bindings. Grilamid Bio The plastic in the clog and cuff are produced from renewable, plant-based sources. General InformationCategory: BackcountryFlex: 130Last Width: 100Custom Shell: NoCustom Liner: YesPower Strap: Booster ActiveVolume: MediumClips: 4 x Light Alloy, Carbon BaleSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 61Weight (g): 1500 (1/2 pair size 27.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
What do you get if you cross a century worth of tour boot making knowledge with one of the world's best ski racers? The Scarpa 4-Quattro XT! Scarpa have teamed up with Bode Miller to produce the ultimate all-round boot that is just as at home skinning up as it is ripping off-piste or carving up groomers on the way back down. This 130 flex boot with Booster technology and the new Axial Alpine Hybrid closure system packs a serious punch and keeps the foot locked in for ultimate control which even the most charging of skiers will appreciate. Yet it also delivers on functionality and lightness for ascents with an impressive 61 degrees of movement and weighing in at just 1500g. Binding compatibility issues are almost a thing of the past as they have used a GripWalk sole unit and full tech inserts, so you get the most options when it comes to choosing your perfect set-up. If you want a boot that truly does everything, this is it. Ability LevelTour4OverviewFitMedium volume mid-foot with plenty of adjustment over the instep and snug heel hold thanks to the Alpine Axial Hybrid construction. ShellGrilamid BIO® produced from renewable, plant-based sources. The shell contains an over-injected carbon insert which improves impulse transmission to the skis, giving greater precision. Pebax tongue provides a lightweight but smooth flexing feel.Liner4PRO Flex XT. Desinged by Intuition, who make some of the best fully mouldable liners. These liners use a more supportive foam on the cuff for improved downhill performance. There’s also flexible neoprene sections behind the Achilles, and around the toes, for touring comfort.Key FeaturesGrilamid Bio Alpine Axial Hybrid The new Alpine Axial Hybrid closure system is specially designed for hybrid boots that can be used for both on-piste and off-piste skiing. Thanks to the straps installed on the tongue and linked at the mid-point of the shell, it provides a snug fit at the Presa SKI-01 sole The sole has an ergonomic design that guarantees excellent grip when walking or hiking, and is compatible with GripWalk certified downhill or ski touring bindings. Grilamid Bio The plastic in the clog and cuff are produced from renewable, plant-based sources. General InformationCategory: BackcountryFlex: 130Last Width: 100Custom Shell: NoCustom Liner: YesPower Strap: Booster ActiveVolume: MediumClips: 4 x Light Alloy, Carbon BaleSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 61Weight (g): 1500 (1/2 pair size 27.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Copyright Interhike. All rights reserved.