Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
Ski Boots - Compare Prices
£150
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£150
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£180
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£200
From Ellis Brigham
The relaunched Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime. [Full Details]
The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the 3D Silver Liner is customised too, adding an extra level of comfort.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold W Thinsulate, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1671 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£230
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£231
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Gold liner adds precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier’s foot is placed inside the complete boot whilst it cools. With the foot’s natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold W Thinsulate, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier’s feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: 40mmVolume: MediumClips: n/aSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1625Binding Compatibility: Alpine, Grip Walk, Walk To Ride, Multi Norm [Full Details]
£245
From Ellis Brigham
The Magna 105 W successfully fills a difficult position in our range: a stiffer boot with extra internal space. Good skiers with high volume feet will appreciate that there is no sacrifice of comfort or performance whilst still providing space. It has a high level of customisation from both the 3D Silver liner and mouldable Memory Fit shell. The shell is easily adapted during the fitting process to give up to 6mm of additional space, the liner fitting adds extra comfort. Customisation doesn't stop with the fit, Powershift means the flex and forward lean can be adjusted too.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.Shell PU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 105Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1988 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£280
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£280
From Ellis Brigham
The Atomic Redster CS 70 LC is perfect for the lighter or younger skier looking for a race fit and feel but in a more forgiving and easier to flex model. The Redster range has years of Atomic racing knowhow behind it, which carries down into the softer and junior models too. They have used the 96mm Narrow Last to provide the closeness of fit and performance that good skiers want and a Progressive Race Shell that uses a thicker but softer plastic to give a superior damp quality to the way the boot flexes. Memory Fit technology means the clog, cuff and Liner can be moulded in-store to help tune the fit even further, in minutes. A low cuff design means that the top of the boot isn't too close to the knee, which can cause problems flexing with shorter leg lengths. This is a great choice for aspiring young racers or good but lightweight shorter adults. Ability LevelBoots12OverviewFitLow volume close fit. Snug heel pocket and narrow across the forefoot. ShellMemory Fit, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerSliver. Mouldable around the ankle area and uses a 3D Stretch Toe Box.Key FeaturesProgressive Race Shell A thicker but softer plastic provides better dampening properties and a more supple feel for conditions Memory Fit A full mouldable shell for an optimal fit and foot to boot connectivity General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x 7000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2017 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The 22/23 season version of the Hawx Prime 85 W remains a huge favourite with many skiers due to its smooth, progressive flex and precise feel. Sometimes softer flexing boots can be geared only towards comfort by having excess volume. Not in this case, the Prime 85 W has a user-friendly stiffness and a shell that is built for good skiing thanks to the Prolite design of lightness, power and sensitivity. Memory Fit allows the plastics to be custom moulded in-store for the best possible shape; a pre-shaped Memory Fit 3D Silver Liner fine-tunes the fit.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320 - £470
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
Intermediates and lighter weight advanced skiers should head straight for the Hawx Prime 100. For 22/23 GripWalk soles have been added to make using the boot around resort more comfortable. The smooth, easy flex is never punishing to use, it encourages good technique, helping skiers make the most of the balanced stance. Prolite construction produces a light boot that is both powerful and sensitive and also fits extremely well. Customisation comes from the heat-moulding of the Memory Fit shell and liner, evening out any pressure and improving the shape; Thinsulate is used for warmth.Ability LevelOverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold, mouldable. Thermoformable material is used in the heel, ankle and midfoot areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1858 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320
From Ellis Brigham
This latest version of a perenial best-seller features an upgraded liner and GripWalk soles. The Prolite constructed Hawx Prime 95 W appeals equally to intermediate and advanced skiers. Prolite means a lighter and more sensitive model without any loss of power or control. The flex is supportive but never overbearing, making it ideal for cruising as well as faster, more technical skiing. Comfort comes from a variety of sources including the tried-and-tested stance that puts skiers in exactly the right position to feel relaxed but also to have good control. The energy Backbone enhances transmission for better grip. When skiing, the boot is responsive and precise, but also light and balanced. This is thanks to the rigid chassis that provides the power and a soft plastic that wraps around the foot. This performance is brought to life by the exceptional fit and the amount of personalisation. The Memory Fit shell is heated and moulded during the fitting, adding up to an extra 6mm of space where needed, the liner has been upgarded to the 3D Mimic Gold and can be impressively customised too, adding an extra level of comfort. Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1695 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Ultra 85 W shares many features of stiffer models in the range, it just uses the softest flex but still benefits from the upgraded stability and ease of getting on and off. This makes it the ideal choice for lighter or less experienced skiers who still want great foot hold, precision and various tuning options to tweak the fit and feel. Customisation is simple with the mouldable Memory Fit shell and liner ensuring a more personalised anatomical shape; energy Backbone provides the right amount of power.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver W, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 85Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1873 (1/2 pair size 24.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Magna takes the class-leading technology of the Hawx range and applies it to a wider, more generous design. A Memory Fit shell with a mouldable Silver Liner means it can be customised for the best possible fit. Power Shift adjusts the flex and amount of forward lean to suit individual skiing styles, further fine-tuning the fit. This is a go-to choice for intermediate and advanced skiers needing volume in their boots but wanting to retain performance. GripWalk sole units make walking much easier and safer.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1950 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Magna takes the class-leading technology of the Hawx range and applies it to a wider, more generous design. A Memory Fit shell with a mouldable Silver Liner means it can be customised for the best possible fit. Power Shift adjusts the flex and amount of forward lean to suit individual skiing styles, further fine-tuning the fit. This is a go-to choice for intermediate and advanced skiers needing volume in their boots but wanting to retain performance. GripWalk sole units make walking much easier and safer.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1950 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Magna takes the class-leading technology of the Hawx range and applies it to a wider, more generous design. A Memory Fit shell with a mouldable Silver Liner means it can be customised for the best possible fit. Power Shift adjusts the flex and amount of forward lean to suit individual skiing styles, further fine-tuning the fit. This is a go-to choice for intermediate and advanced skiers needing volume in their boots but wanting to retain performance. GripWalk sole units make walking much easier and safer.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1950 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Magna takes the class-leading technology of the Hawx range and applies it to a wider, more generous design. A Memory Fit shell with a mouldable Silver Liner means it can be customised for the best possible fit. Power Shift adjusts the flex and amount of forward lean to suit individual skiing styles, further fine-tuning the fit. This is a go-to choice for intermediate and advanced skiers needing volume in their boots but wanting to retain performance. GripWalk sole units make walking much easier and safer.Ability LevelOverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.eZ Step-inWide opening at throat and instep area makes stepping-in simple.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1950 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
This 100 flex Hawx is the softest offering in our range of Ultra models and has been through the same re-design to improve stability and agility. It ensures intermediates have the same great fit as experts, delivering ultimate foot hold and excellent levels of customisation from the Memory Fit shell and 3D Silver Liner. It also shares the energy Backbone from the stiffer versions to increase drive and responsiveness, but in a slightly softer format to suit lighter skiers or those who don't want to ski Mach 10 everywhere.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 100Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1805 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
This 100 flex Hawx is the softest offering in our range of Ultra models and has been through the same re-design to improve stability and agility. It ensures intermediates have the same great fit as experts, delivering ultimate foot hold and excellent levels of customisation from the Memory Fit shell and 3D Silver Liner. It also shares the energy Backbone from the stiffer versions to increase drive and responsiveness, but in a slightly softer format to suit lighter skiers or those who don't want to ski Mach 10 everywhere.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 100Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1805 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
This 100 flex Hawx is the softest offering in our range of Ultra models and has been through the same re-design to improve stability and agility. It ensures intermediates have the same great fit as experts, delivering ultimate foot hold and excellent levels of customisation from the Memory Fit shell and 3D Silver Liner. It also shares the energy Backbone from the stiffer versions to increase drive and responsiveness, but in a slightly softer format to suit lighter skiers or those who don't want to ski Mach 10 everywhere.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 100Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1805 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
This 100 flex Hawx is the softest offering in our range of Ultra models and has been through the same re-design to improve stability and agility. It ensures intermediates have the same great fit as experts, delivering ultimate foot hold and excellent levels of customisation from the Memory Fit shell and 3D Silver Liner. It also shares the energy Backbone from the stiffer versions to increase drive and responsiveness, but in a slightly softer format to suit lighter skiers or those who don't want to ski Mach 10 everywhere.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 100Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1805 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
This 100 flex Hawx is the softest offering in our range of Ultra models and has been through the same re-design to improve stability and agility. It ensures intermediates have the same great fit as experts, delivering ultimate foot hold and excellent levels of customisation from the Memory Fit shell and 3D Silver Liner. It also shares the energy Backbone from the stiffer versions to increase drive and responsiveness, but in a slightly softer format to suit lighter skiers or those who don't want to ski Mach 10 everywhere.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Silver, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.SpecificationCategory: AlpineFlex: 100Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1805 (1/2 pair size 26.0)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370 - £560
Using many features of the top-end models in the range, the Hawx Prime XTD 100 HT is an excellent introduction in to the world of BC ski boots providing performance, comfort and excellent value. Prolite construction uses different thicknesses of shell wall to balance lightweight with power and control. The Free/Lock hike and ski system provides 54deg of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the 3D Silver Touring liner takes a mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles at the toes (not at the heel) so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Silver with Touring Flex Zone, mouldable. Thermoformable material is used in the heel and ankle areas. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. A special construction in the rear of the liner allows it to flex backwards for a more comfortable range of motion when the walk mode is being used.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: Toe onlyHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1962 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
Atomic’s Hawx Prime 105 is made for comfortable high-performance skiing. A 100mm last and a well-considered shape hold the foot without squeezing, whilst still providing the control needed for good skiing. The pre-shaped 3D Mimic Gold liner adds impressive precision and improves the fit, as well as having Thinsulate to wrap the whole foot for warmth and comfort. The shell benefits from Prolite design that blends lightness, power and sensitivity, as well as the customised fitting of the mouldable Memory Fit technology.Ability LevelBoots12OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1636 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
This latest version of possibly the best-fitting, wider-volume women's boot has a new shell design and updated liners. The Magna 105 W successfully fills a difficult position in our range: a stiffer boot with extra internal space. Good skiers with high volume feet will appreciate that there is no sacrifice of comfort or performance whilst still providing space. It has a class leading level of customisation from both the 3D Mimic Gold liner and mouldable Memory Fit shell. The shell is easily adapted during the fitting process to give up to 6mm of additional space, the liner fitting adds extra comfort. Customisation doesn't stop with the fit, Powershift means the flex and forward lean can be adjusted too.Ability LevelBoots12OverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. This latest version provides more stability and greater power to weight thanks to some clever work with the Prolite construction. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1814 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£370
From Ellis Brigham
This latest version of possibly the best-fitting, wider-volume women's boot has a new shell design and updated liners. The Magna 105 W successfully fills a difficult position in our range: a stiffer boot with extra internal space. Good skiers with high volume feet will appreciate that there is no sacrifice of comfort or performance whilst still providing space. It has a class leading level of customisation from both the 3D Mimic Gold liner and mouldable Memory Fit shell. The shell is easily adapted during the fitting process to give up to 6mm of additional space, the liner fitting adds extra comfort. Customisation doesn't stop with the fit, Powershift means the flex and forward lean can be adjusted too.Ability LevelBoots12OverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. This latest version provides more stability and greater power to weight thanks to some clever work with the Prolite construction. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1814 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£370
From Ellis Brigham
This latest version of possibly the best-fitting, wider-volume women's boot has a new shell design and updated liners. The Magna 105 W successfully fills a difficult position in our range: a stiffer boot with extra internal space. Good skiers with high volume feet will appreciate that there is no sacrifice of comfort or performance whilst still providing space. It has a class leading level of customisation from both the 3D Mimic Gold liner and mouldable Memory Fit shell. The shell is easily adapted during the fitting process to give up to 6mm of additional space, the liner fitting adds extra comfort. Customisation doesn't stop with the fit, Powershift means the flex and forward lean can be adjusted too.Ability LevelBoots12OverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots.ShellPU Memory Fit shell and cuff, mouldable. This latest version provides more stability and greater power to weight thanks to some clever work with the Prolite construction. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesPower ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 105Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1814 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£370
From Ellis Brigham
The Hawx Prime 110 S brilliantly balances comfort, precision and performance whilst being noticeably lighter than the original versions. Prolite means a stiff chassis for power and an integrated softer plastic that wraps around the foot for even pressure distribution and increased sensitivity. Memory Fit makes the most of this design, allowing the shell to be moulded to the skier's foot – personalisation that is enhanced by the 3D Mimic Gold Liner with Thinsulate. This combination produces a long-lasting customised shape with a uniform pressure and excellent foothold. GripWalk sole units add a user-friendly feel.Ability LevelBoots10OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellPU Memory Fit shell and cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1801 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£400
From Ellis Brigham
The new, more powerful Hawx Ultra 110 S remains impressively light and is still the ultimate choice for advanced skiers with a narrower foot. A Memory Fit shell can be moulded up to 4mm wider across the forefoot (more in the ankle and navicular) which means the boot suits various foot shapes. The Memory Fit 3D Gold Liner fine-tunes the fit. A Power Shift function adjusts forward lean to let you choose how to attack the hill and the energy Backbone provides all the drive and power you'll need.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Gold 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1815 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
Copyright Interhike. All rights reserved.