Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£180
From Ellis Brigham
Atomic know that young kids need a good race boot too and that's why they've developed the Redster JR 60 RS. It uses some of the race tech from stiffer models but this 60 flex version will suit lighter, younger skiers who are a few years off senior race boots. The 98mm last provides a closeness of fit that good skiers need and the Progressive cuff design allows the boot to flex in a way that is powerful but has a forgiving damp quality too. The Junior Performance Shell design reduces weight without compromise on performance and a 30mm powerstrap helps to deliver power and responsiveness when racing through gates. A great option for junior racers or young aggressive piste skiers. Ability LevelBoots9OverviewFitA lower volume feel with good foot hold ShellJunior Performance Shell LinerSilver. Moulds around the ankle area.Key FeaturesJunior Performance Shell Delivers a smooth, proper flex for lighter weight skiers with reinforced areas to provide stability. Progressive Cuff DesignAs the boots progress in size, the level of stiffness increases accordingly. General InformationCategory: RaceFlex: 60Last Width: 98Custom Shell: NoCustom Liner: YesPower Strap: Velcro 30mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1520 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£380
From Ellis Brigham
The Hawx Ultra 95 W is always one of our most popular boots and the current version with a firmer shell and more powerful skiing than previous models is sure to continue this. It's still incredibly lightweight, with the same medium to low volume shape and a flex that targets intermediate and advanced skiers. Customisation is simple with the Memory Fit shell heat moulded to match the skier's foot shape whilst the Memory fit 3D Gold Liner provides extra customisation. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment, this great boot can be perfectly set to your skiing style.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 95Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1805 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Ski Boots - Compare Prices
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£75
From Ellis Brigham
Smaller, younger skiers don't need 4 and 3-clip boots, as they can be too stiff and high on the leg. The Z2 is the ideal option for them. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. It's easy to put on and take off and combines comfort with good foot hold.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 902 (1/2 pair size 20.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£140
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16o forward lean and a 4o ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£170
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16 degree forward lean and a 4 degree ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£170
From Ellis Brigham
The Raptor 70 has been developed as a junior member of Head's very successful high-performance race-boot range. The shell is precise and responsive, though a lighter plastic makes it less tiring to use and more tolerant of little balance errors. The Junior Team liner is a perfect blend of performance and foot hold, and all 4 of the buckles are micro-adjustable to fine tune the fit. With 16 degree forward lean and a 4 degree ramp angle these have truly been built for the next generation of champions.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Team with a self-shaping footbed.Key FeaturesJr Racing Flex TuningAdjustable flex to account for different body weights and peformance levels.Jr Racing LastTaking the knowledge and shaping fom the adult race boots and scaling it to work perfectly for youngers racersRace BalanceUsing the experience of building succesful adult race boots means Head can dial-in the stance on the junior race models with a 16degree forward lean and 4degree ramp angle.SpecificationCategory: AlpineFlex: 70Last Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: Velcro 30mmVolume: Medium-LowClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1356 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£215
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£215
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£255
From Ellis Brigham
Make no mistakes, this is a bona fide race product designed specifically for youngsters. The PU shell construction is easy to work on and adapt, whilst the JR WCR HF Pro race liner maximises fit and control. The FIS approved sole, dual canting and specific junior cuff prove this boot is aimed at serious skiers. Low profile alloy buckles, adjustable flex and a 40mm Velcro power strap add to the boots credentials; no shortcuts have been taken. 96mm last (size 26.5).Ability LevelBoots11OverviewFitSnug rear and mid foot with extended toe box for extra room.ShellPU with short cuff, provides maximum control without excess force on the leg.LinerJR WCR HF Pro, with lace option, heat mouldable. Can be custom moulded for the best comfort and performance.Key FeaturesRace ReadyJR Racing spoiler, FIS approved sole thickness, Rear Support Tuning and racing low profile buckles.AnglesForward lean 14 degrees, ramp angle 4 degrees.General InformationCategory: RaceFlex: 70Last Width: 96Custom Shell: NoCustom Liner: YesPower Strap: Velcro 40mmVolume: LowClips: 4 x Alloy MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1862 (1/2 pair size 22.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 90 W is packed with useful innovation that boosts comfort and performance as well as reducing weight, and for 22/23 it now uses GripWalk soles to make getting around resort more comfortable and safer. The Smart Frame construction increases rebound and works with the Hi-Top Tech design to improve control. Weight drops by 20% whilst power transfer increases compared to previous models. The Form Fit plastic of the shell is custom moulded during the fitting to more closely match the skier's feet; the Perfect Fit 3D liner is pre-shaped for comfort and heat moulded to further customise the fit. A women's specific adjustable cuff adds extra personalisation.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.LinerPerfect Fit HD W, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots.Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1638 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 90 W is packed with useful innovation that boosts comfort and performance as well as reducing weight, and for 22/23 it now uses GripWalk soles to make getting around resort more comfortable and safer. The Smart Frame construction increases rebound and works with the Hi-Top Tech design to improve control. Weight drops by 20% whilst power transfer increases compared to previous models. The Form Fit plastic of the shell is custom moulded during the fitting to more closely match the skier's feet; the Perfect Fit 3D liner is pre-shaped for comfort and heat moulded to further customise the fit. A women's specific adjustable cuff adds extra personalisation.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.LinerPerfect Fit HD W, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots.Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1638 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Head's edge Lyt 130 mixes a high volume fit, a stiff flex and clever design, with this 22/23 season version now coming with GripWalk soles fitted. Lytech keeps the weight down, saving 20% compared to previous versions; Smart Frame utilises a lightweight shell construction and a Graphene infused PU material to increase performance and improve rebound. The Form Fit shell and Perfect Fit 3D liner can both be custom formed during the fitting; Liquid Fit takes the personalisation further with the addition of a flexible material in key fitting zones to improve comfort and precision.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellGraphene infused FormFit PU shell and cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.GrapheneGraphene is the thinnest and lightest element ever discovered by mankind. Graphene is also the strongest material on the planet, stronger than diamond and 300 times stronger than steel, all in the thickness of one atom.General InformationCategory: AlpineFlex: 130Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1790 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Copyright Interhike. All rights reserved.