Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£210
From Ellis Brigham
Dalbello’s Panterra 100 is a great all mountain choice for intermediate and lighter advanced skiers. The hike mode provides 50o of articulation for ascending or just getting around town; GripWalk soles improve walking. The Power Cage saves weight over previous models without dropping any performance; Cabrio design ensures a smooth flex and consistent contact with the tongue and shin, as well as easy entry and exit. Personalisation comes via the custom fitting of the MyFit shell, IF Performer liner plus the twin canting and variable ramp angle. Alpine soles are provided in the box.Ability LevelOverviewFitA medium to high volume fit all over, cabrio construction gives some flexiblity for height over the instep. Shell Irfran shell and cuff with PU tongue, mouldable. Dalbello's unique Cabrio construction combines a boot shell/boot cuff assembly with an external Kinetic Response Tongue closure which enables a progressive power transmission and great shock absorption. Furthermore, a smooth flex and a dynamic rebound are characteristic of the Cabrio Construction. This design also allows for an effective Hike & Ride feature, as the burly cuff lock mechanism frees the upper cuff from the lower shell a long range of motion for functional hiking and climbing is guaranteed. The Powercage design and milled outer shell result in optimum power distribution across the entire boot and reduce the weight without compromising on stabilityLinerIF Performer Liner, mouldable. IF means Instant Fit and stands exactly for this - instant fit at the very first step in. 60% of this high-performance fitting liner can be thermo formed in four minutes only. The special 8mm medium density of Ultralon foam cushions the foot as great as it supports the power transmission. Pe upper provides support and the neoprene toe box improves comfort.Key FeaturesGripWalk SolesWalking in ski boots always was difficult and somehow dangerous. GripWalk is the revolutionary sole-binding innovation that provides much better walking comfort and improved grip. GripWalk soles with rocker profile are completely covered with a high friction material for better grip on any surface. Integrated anti friction bars enable a very direct and effective power transmission to the binding.Dynalink Heel Retention SystemThe Dynalink heel retention is an independently functioning heel / instep closure assembly which minimizes foot sliding, heel lift and boot shell distortion during the flex effectively.Low Cuff Hinge PointThe Panterra uses a high leverage cuff assembly with hinge points mounted lower than standard construction boot designs. The Low Hinging Cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.Variable Volume Fit Shell Fitexclusive to Dalbello. Developed to permit skiers to regulate overall boot width from a range of 102 to 100 mm. Set it, and forget it. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles.Inverted Forefoot BuckleThe forefoot closure buckle is inverted to close on top of the boot shell, not on the side. The top closure positioning prevents buckle breakage and bending.Variable Ramp AngleAdding the variable ramp angle Shim under the footboard changes the ramp angle from 3 to 4 degrees. This gives the skier the ability to find the optimum ramp angle for balance and performance.SpecificationCategory: AlpineFlex: 100Last Width: 100-102Custom Shell: YesCustom Liner: YesPower Strap: 40mmVolume: Medium-HighClips: n/aSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1920Binding Compatibility: Alpine, Grip Walk, Multi Norm [Full Details]
Head's edge Lyt 110 may carry the edge name of the previous models from a few season's ago, but apart from the fact it is a generous fit and suits good intermediate and advanced skiers, it's a very different boot, and for this year it now includes GripWalk soles. The biggest differences are the weight and the flex. Thanks to Lytech design it's 20% lighter and with the Smart Frame this construction helps to create a more dynamic rebound. Hi-Top Tech uses a higher shell internally, increasing contact with the tongue and providing more support, meaning less effort is required to transmit forces and drive skis, as well as making entry and exit easier. Double Power Buckles on the cuff reduce the pressure needed to do the boot up, making it simple to get on and off. The Form Fit shell and the Memory Fit 3D liner can be both custom moulded during the fitting to improve comfort and precision. The flex can also be adjusted to further tune the set-up. This particular version of the 110 model is exclusive to ellis Brigham in the UK, differing from the standard version because it has the excellent Liquid Fit system included, so true personalisation can happen if the heel area needs to be made snugger.Ability LevelOverviewFitA generous overall feel with a high instep. Good for wider feet and broad heel bones.ShellFormFit PU shell and SuperLight cuff, customisable. easily customised instore via a heating and cooling process that involves the skier standing in a warmed shell while it forms to their foot. FormFit plastics hold stretches better than ever before for perfect comfort with improved balance and control.Liner3D Perfect Fit with Liquid Fit, customisable. Perfect Fit is the revolutionary system that ensures comfortable, performance-orientated customisation in Head ski boots. The 3D pre-shaped construction has been developed to provide the maximum comfort and optimal adaptation to the foot shape. The Liquid Fit material provides the most precise and the quickest customisation. The material's density ensures the perfect mould in the most critical areas of the boot – the ankle and heel pocket. It gives you the performance and precision of a foam liner, but as a liquid material, it takes only 10 easy minutes to customise. (A Liquid Fit ready boot must be customised by an authorised dealer, such as ellis Brigham)Key FeaturesHi-Top TechDirect contact between the boot tongue and the shell delivers supreme support for more confident skiing.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.Smart FrameThe new lightweight shell construction is specifically designed for a more dynamic rebound that greatly improves performance for all mountain skiers.General InformationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x Alloy, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1781 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£580
From Ellis Brigham
Fischer's Ranger One 130 builds on the success of the Ranger Free. It uses the same excellent ski and walk lever but a wider last shape and the effective Vacuum shell material. The bigger volume and firm flex will appeal to an underserved sector of the market, skiers with broader feet who want a hike mode boot and good alpine performance. GripWalk soles and Dynafit inserts make it compatible with all tour bindings; Vacuum ensures impressive custom fitting during purchase. A floating entry tongue makes entry and exit simple, even in the coldest conditions.Ability LevelTour5OverviewFitGenerally a high volume fit, a comparatively snug heel and ankle area compared to most high volume fits.ShellVacu-plast PU shell and PU cuff, mouldable. Traditional 2-piece design for the best performance when skiing. Vacuum Shell technology means the shell of the boot can be precisely moulded and fitted to the skier's foot.LinerMouldable. 3D PreShaped Ankle pockets perfectly match the foot anatomy providing a snug comfortable fit.Key FeaturesSki/Walk ModeWhen the best downhills are waiting on the other side of a long uphill, the Ranger's excellent walkability is a skier's best friend. Switch the clever integrated lever on the side of the cuff to walk mode for an excellent range of forward motion. This switch location makes it easy to access and ensures no compatibility issues with walking crampons.VACUUMVacuum technology uses a unique process and a specially developed high-tech plastic to adapt the shell of the ski boot to the anatomy of any foot. Prior to fitting the plastic of the boots are heated and softened. With the liner inserted, the skier’s foot is placed inside. A special cooling pad is placed around the outside, followed by a compression bag linked to the Vacuum Fit station. The skier then stands on the station in a pre-determined position, this will ensure the boot cools down and shapes to the skier’s natural stance. Once in position, air is pumped into the compression bags, pushing them against the boot and improving the mould being taken of the foot. This procedure achieves a sporty, comfortable fit that is unrivalled in this segment. The heel and ankle area can be expanded or compressed to create best possible shape; the forefoot can be made roomier. Vacu-PlastThis unique material was developed exclusively for use with Fischer ski boots. Apart from its extraordinary moulding properties Vacu-Plast also has other special features: it is very temperature stable, meaning it isn’t adversely affected on extreme cold days when certain plastics become very stiff; it is lighter than other materials used on performance ski boots, and it has better vibration dampening.General InformationCategory: BackcountryFlex: 130Last Width: 101Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 55Weight (g): 1850 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Ski Boots - Compare Prices
£90
From Ellis Brigham
The Speedmachine J 3 is ideal for girls who want to progress in comfort and with confidence. The Triax plastic keeps the weight down without affecting performance and the Comfort Fit liner is both supportive and cosy. 3 aluminium buckles are perfectly placed to hold the foot in position without excess pressure or coming too high up the leg. The top clip has a macro-adjustment should more movement be required; a soft plastic insert over the instep allows for easy entry and exit. Best of all, is the Weight Adjuster, a simple mechanism to alter the flex depending on the skiers weight so the boot always has the right mix of support and precision.Ability LevelBoots7OverviewFitMedium volume with nice all over hold that has good heel grip and space at the toes.ShellTriax shell and cuff. Triax is a light material that provides the necessary support without being over stiff, perfect for lighter weight skiers.LinerComfort Fit. Nordica's Comfort Fit liners offer great out of the box fit and comfort; the plush liners adds an extra level of warmth and cosiness; the tongue can be customised with heat moulding.Key FeaturesWeight AdjusterNordica's junior 3 buckle boots are equipped with a Weight Adjuster. This is a simple system which allows the best flex to be chosen, depending on the skiers needs. Select I for skiers under 25kg, to keep the flex soft and easy; II for skiers 25-45kg for a medium flex that combines support and forgiveness; III for skiers over 45kg who need a stiffer setting and more support. easy entrySoft plastic over the instep allows for an easy entry and exit when taking the boot on or off.General InformationCategory: AlpineFlex: 45Last Width: n/aCustom Shell: NoCustom Liner: YesPower Strap: n/aVolume: MediumClips: 3 x aluminium Sole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 860 (1/2 pair size 21.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£100
From Ellis Brigham
The Speedmachine J 4 will help girls progress in comfort and with confidence. The Triax plastic keeps the weight down without affecting performance and the Comfort Fit liner is both supportive and cosy. 4 micro-adjustable buckles ensure the right amount of pressure to hold the foot in place without excess pressure; the 25mm powerstrap is simple to use and improves leg retention, boosting control and comfort.Ability LevelBoots8OverviewFitMedium volume with nice all over hold that has good heel grip and space at the toes.ShellTriax shell and cuff. Triax is a light material that provides the necessary support without being over stiff, perfect for lighter weight skiers.LinerComfort Fit. Nordica's Comfort Fit liners offer great out of the box fit and comfort; the plush liners adds an extra level of warmth and cosiness; the tongue can be customised with heat moulding.Key Featureseasy entrySoft plastic over the instep allows for an easy entry and exit when taking the boot on or off.General InformationCategory: AlpineFlex: 55Last Width: 100Custom Shell: NoCustom Liner: YesPower Strap: Velcro 25mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1400 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£238
From Ellis Brigham
This Speedmachine 95 W offers the ideal blend of performance and comfort for intermediate to advanced female skiers. Tri Force Construction and a pre-formed 3D Performance Fit liner give the right amount of hold for responsive skiing. An Infrared Technology shell means pressure points can be specifically targeted to create the most complimentary shape for maximum comfort. Using a softer plastic over the instep takes the struggle out of getting in and out of the boots and a PrimaLoft liner will help keep feet toasty for longer.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1780 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Speedmachine 3 85 W packs gentle punch compared to its stiffer counterparts, but it keeps the key features and medium volume fit that make the Speedmachine 3 range stand out. The new 3Force construction uses an innovative stiff honeycomb subframe to provide power and control whilst staying light, and a softer plastic around key fit areas to comfortably wrap the feet with an even softer plastic over the instep to take the hassle out of getting them on or off. It too can be fine-tuned with Infrared technology and Adjustable Calf Profile meaning the shell can be quickly customised to really dial in the fit. The 3D Performance Fit Primaloft liner is pre-shaped and provides the perfect interface between the shell and foot which can heat moulded to give just the right level support and comfort you need. The addition of Primaloft keeps feet warm to make sure you spend more time on the hill skiing for longer, happy feet equals happy skiers. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1630 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Strider 130 allows you to fully explore the mountain whether using lifts or hiking for extra vert. Tri-Fit Customisation uses an infra-red ready shell that can be easily expanded, screw-in components for simple changes and a 3D Custom Cork mouldable liner with PrimaLoft for warmth and durability. The exceptional fit and comfort is matched by the performance: 46° range of motion aids ascents, the lightweight cuff and Tri Force construction ensure power without excess weight and Michelin Grip Walk soles improve traction.Ability LevelOverviewFitA snug fit on the rear foot with generous forefoot width and a medium to high instep.Shell Carbon Triax cuff, Infrared PU clog, mouldable. Lightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort. Infrared technology uses an infrared lamp and a vacuum system for precise and safe customisation where extra work is needed on a shell.Liner3D Cork Fit Primaloft Light, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesWeather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Feather Lock Hike/Ski MechanismThe Feather Lock system creates a 46o range of motion yet when locked-out in ski mode, its spine delivers unprecedented power and precision for the ride down.Michelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: BackcountryFlex: 130Last Width: 100Custom Shell: noCustom Liner: yesPower Strap: Velcro 45mmVolume: mediumClips: Sole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: yesRange Of Motion: 46Weight (g): 1910Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With a generous 102mm last the new Sport Machine 3 110 is the perfect choice for good skiers needing a wider fit. The boot can be fine-tuned to give even more space where needed thanks to its Infared shell that provides easy customisation, plus an Adjustable Cuff Profile that can add a generous 14mm of extra space around the top of the cuff, ensuring a well-balanced stance whatever the calf size. A Tri-Force construction blends a rigid subframe that gives the boot power and drive to the skis, with a softer plastic that comfortably wraps the rest of the rest of the foot. A new Sportmachine means a new liner too, the pre-shaped 3D Performance Fit PrimaLoft maximises foot hold and can be heated and customised for instant comfort, plus PrimaLoft helps to keep feet extra warm too. Gone are the days where high volume meant low performance.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The new Pro Machine 100 retains a lot of the features of its stiffer counter parts, such as Tri Force construction which uses a mix of stiff plastics in the sole and spine of the boot to aid power transmission while softer plastics to comfortably wrap around the rest of the foot to boost comfort and retain excellent foot hold. Infrared fit technology is used to easily and quickly heat the shell to add shape when needed; the preformed Isotherm 3D PrimaLoft liner enhances the fit and feel further with its grippy heel and ankle pockets while the insulation provides extra warmth. This boot is something of a rarity as it sits in a category which is often overlooked by other brands, that of low-volume softer-flexing boots. These are perfect for intermediate, or light-weight advanced, skiers with narrow feet, meaning they can get the foot hold they need without having to resort stiffer models.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 100Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
The Promachine has been a huge success for female intermediate skiers who want a slimmer fitting boot where comfort, performance and lightweight come together without having to include a stiff flex. The fit works especially well straight out of the box, offering a snug hold. Infrared Technology means the shell can be adjusted with customised fitting to accommodate any little bumps or bones if necessary. To really ensure the best possible fit, the liner is heat moulded during fitting, making it snug and comfy as well as warm thanks to the PrimaLoft padding.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 85Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With its higher volume shell and easy customisation, the Sportmachine 3 95 W is a great option for intermediate female skiers needing a wider fit. The Infrared technology used on the shell means it can be heated in specific areas to provide extra shape where needed and the Adaptive Calf Profile can add a generous 14mm of cuff space to better suit the skier's anatomy. A Tri-Fit construction shell stiffens the parts of the boot responsible for power transfer and control and uses more fit-friendly softer plastics to encase the foot for better comfort. Over the instep is an even softer plastic to help the boot open and let the foot slide in and out effortlessly. A women's specific, pre-shaped 3D Performance Fit PrimaLoft liner provides synergy between the foot and shell and can be heat moulded to provide the right balance of support and comfort. This well-designed wide fitting option means that skiers needing a more generous fit no longer have to sacrifice on performance to get the comfort they desire.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£325
From Ellis Brigham
With its higher volume shell and easy customisation, the Sportmachine 3 95 W is a great option for intermediate female skiers needing a wider fit. The Infrared technology used on the shell means it can be heated in specific areas to provide extra shape where needed and the Adaptive Calf Profile can add a generous 14mm of cuff space to better suit the skier's anatomy. A Tri-Fit construction shell stiffens the parts of the boot responsible for power transfer and control and uses more fit-friendly softer plastics to encase the foot for better comfort. Over the instep is an even softer plastic to help the boot open and let the foot slide in and out effortlessly. A women's specific, pre-shaped 3D Performance Fit PrimaLoft liner provides synergy between the foot and shell and can be heat moulded to provide the right balance of support and comfort. This well-designed wide fitting option means that skiers needing a more generous fit no longer have to sacrifice on performance to get the comfort they desire.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The Portmachine shell shells offers a slighlty higher volume fit in the mid to forefoot whilest still maintaining decent rearfoot hold. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1650 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1650 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
This new 100mm last and 95 flex boot from Nordica is sure to be a favourite as it sits in the sweet spot for a lot of skiers. The medium volume shell can easily be customised with its Infrared technology allowing quick heating and modification in-store to fine tune the fit. A 3D Cork Fit W PrimaLoft liner, taken from the top model in the range, has been pre-formed around the ankle with cork and helps secure the foot in the boot for a precise and responsive feel, which can be customised to enhance the fit further. The 3Force construction uses a clever mix of different plastics; a stiff solid chassis and honeycomb structure provide the power and control and are blended with softer plastics to comfortably wrap the foot. This combination allows easy entry and comes in 5% lighter than previous models.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Weather ShieldThe Weather Shield is an overlap system integrated into the shell that provides a full waterproof feature to prevent water from leaking into the boot. And as we all know, dry feet are warm and comfortable feet!Adjustable Cuff ProfileAllows for quick and easy adjustment of the upper cuff circumference for more comfort to allow skiers to be positioned in a more natural skiing stance.SpecificationCategory: AlpineFlex: 95Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£340
From Ellis Brigham
Nordica have given the legendary Speedmachine shell a rework to provide even better performance and more comfort. This 110 flex version provides the right amount of power and support for good intermediate or less aggressive advanced skiers need. The Honeycomb design featured in the new 3Force construction builds a strong and lightweight frame around the foot for power delivery while also using softer plastics to comfortably wrap the foot for an excellent out of the box feel for medium volume feet. Infrared technology allows boot fitters to quickly and easily heat the shell to shape the boots in problem areas and fine tune the fit. The 3D Cork Fit PrimaLoft liner gives excellent rear foot hold and can be moulded to enhance the comfort further; the added insulation makes sure feet stay warmer for longer, happier days on the slopes. Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Performance Fit PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
The Promachine 110 is part of the new breed of performance boots: light, responsive and easily customised. Tri Force Construction fuses a rigid spine and sole with a softer plastic frame that wraps the foot. The hard material transmits the forces and drives the skis; the softer plastic evens out the pressure and holds the foot more comfortably. A softer-still plastic is used on the instep, making entry and exit easier, something often overlooked on closer-fitting models. This construction uses Nordica's Infrared technology for custom moulding when needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot instore. The result is exceptional power transmission from an impressively comfy boot.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 110Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£350
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1760 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1760 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1760 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Promachine 105 W has the pedigree of a race boot, just without any of the downsides. It's a close fit with a precision feel on snow and a firm flex. The use of Tri Force Construction and thinner shell walls make it light and responsive, as well as much easier to get in and out of compared to boots built just for the race course. An Isotherm 3D Cork and PrimaLoft liner adds impressive levels of comfort and custom fitting, as well as warmth and longevity.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit W PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 105Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£400
From Ellis Brigham
The Speedmachine 3 120 features a shell with an innovative honeycomb construction made from a rigid plastic that integrates with a softer plastic. The result is impressive support and power transmission in key areas whilst the foot is still comfortably enveloped, as well as making the shell 5% lighter than previous models. The easy entry Soft Flap allows the instep of the boot to effortlessly spread open, making getting in and out of the boots a breeze. Infrared technology allows quick heating and modification of the shell to create a customised shape for your foot. A mouldable 3D Cork Fit PrimaLoft liner enhances the fit further, providing excellent heel and ankle grip with added insulation to help keep your feet warm. This is the ideal choice for strong skiers with medium volume feet.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica have brought the rear entry boot back with a bang, the comfy fitting HF 85 W totally takes the hassle out of owning ski boots. With only one buckle for opening and closure, the Back Buckle Closure System uses a hands-free design that swiftly opens the rear of the boot so you'll be the first one ready to ski in the morning and when you're done for the day, you'll be back out of your boots in no time at all. A simple yet effective ratchet strap over the instep provides a closer fit and the HF 3D Cork Fit W PrimaLoft liner uses some tricks borrowed from top-end liners to make the foot comfortable yet supported. These include a pre-formed ankle area which is lined with cork to provide foot hold and can be heat moulded for the best fit, there's also Primaloft insulation for warmer, drier feet. Further customisation is available with Nordica's signature Infrared technology which means boots can be easily heated in specific areas to add shape where needed. This is the perfect blend of tried and trusted design with new technology, bringing together comfort, control and ease of use.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.SpecificationCategory: AlpineFlex: 85Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
The Promachine 120 was designed with high-performance in mind, delivering a precise fit with firm flex. Tri Force Construction combines the right amount of stiffness in crucial areas like the sole and spine for efficient power transmission with softer plastics that comfortably wrap the foot for excellent foot hold. The easy entry Soft Flap positions an even softer plastic over the instep so that it spreads easily as you slide your foot in and out of the boot, something that is often difficult in other performance boots. Infrared technology is used making it simple to quickly customise the boot in problem areas. A pre-formed Cork Fit PrimaLoft liner gives a great out-of-the-box feel with excellent rear foot hold and the insulation keeps feet warmer for longer on cold days. All of this together means that Nordica have designed a boot that suits high end skiers yet delivers on comfort and practicality too.Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D Cork Fit PrimaLoft, mouldable. This liner wraps 3D pre-shaped cork around the rearfoot giving excellent hold, transmission of power and dampening which is customisable too. Add in PrimaLoft and you get a liner with excellent thermal insulation and a precision feel.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
With a flex of 115 this Speedmachine 3 sits at the top of our women's boot range. There's a lot of innovation packed into this model such as the 3Force construction, a lightweight honeycomb design that provides lateral stiffness and linear power to the ski for ultimate control and feedback. This is effectively blended with softer plastics to wrap the foot and deliver comfort with ease of entry, something that other performance boots can compromise on. A pre-shaped 3D Cork Fit W PrimaLoft liner makes sure the boot feels, and fits, great straight out of the box. The liner can also be moulded to maximise comfort, while the cork adds rear foot hold and the PrimaLoft insulation ensures feet stay warm. Infrared technology on the shell makes sure the boot can be customised quickly and effectively in-store to add extra shape where needed. The ultimate choice for advanced and expert skiers wanting a medium width boot.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 115Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
£425
From Ellis Brigham
With a flex of 115 this Speedmachine 3 sits at the top of our women's boot range. There's a lot of innovation packed into this model such as the 3Force construction, a lightweight honeycomb design that provides lateral stiffness and linear power to the ski for ultimate control and feedback. This is effectively blended with softer plastics to wrap the foot and deliver comfort with ease of entry, something that other performance boots can compromise on. A pre-shaped 3D Cork Fit W PrimaLoft liner makes sure the boot feels, and fits, great straight out of the box. The liner can also be moulded to maximise comfort, while the cork adds rear foot hold and the PrimaLoft insulation ensures feet stay warm. Infrared technology on the shell makes sure the boot can be customised quickly and effectively in-store to add extra shape where needed. The ultimate choice for advanced and expert skiers wanting a medium width boot.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. Speedmachine shells offer a relaxed fit with easy entry and exit, but plenty of foot hold for performance skiing. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key Features3Force Technology3 densities of plastic combine to create the perfect balance of performance, fit and lightness. The secret lies in the new rigid plastic material, which provides a powerful frame and has been given an innovative geometry. Its Honeycomb construction lightens the overall weight of the boot, but increases the surface area to integrate perfectly with the softer compounds. Softer plastics are used to complete the shell for comfort and overall lightness.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 115Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): Grip Walk, WTR, Multi NormBinding Compatibility: Yes [Full Details]
Copyright Interhike. All rights reserved.