Compare Prices on Outdoor Equipment



⌄


Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots

Add Interhike.com search to your browser
Products available in:

Ski Boots - Compare Prices

Hide Product Images Hide Product Images
Product
Price
Buy
Buy From...
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The evolver Jr is built for the next generation of skiers. Based on the original Full Tilt boot and using the Revolver shell, this is the real-deal for younger and lighter skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or cruising groomers. The shell uses the Original design, with a 99mm last, meaning good foothold and precise ski control. The big difference is the cuff that is shortened to better suit smaller riders and make sure there aren't excessive forces on the leg. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex of 70 is ideal for lighter skiers to use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. As well as the shell which can be heat moulded, the Intuition Tongue liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, and the cables and buckles can be easily replaced if damaged.Ability LevelBoots9OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 70Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
K2's Anthem 85 MV GW takes all the tech of the high-performance versions in the range and dials it back to suit lighter and less-skilled skiers. The same Prolite Shell ensures the weight is surprisingly low and the response impressive, as well as being custom mouldable to provide the maximum comfort and the right amount of foot hold. The liner is heat moulded to the skier too, using softer materials than stiffer flexing boots and resulting in less pressure points and more all-day comfort.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShell TPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerLuxeFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.SpecificationCategory: AlpineFlex: 85Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium Clips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The K2 FL3X Method Pro W is a super comfy option for ladies wanting a boot that is easy to use but still delivers performance on the mountain and in the park. It, of course, uses the FL3X 3-piece design with a ribbed tongue for the smoothest flex and the best shock absorption whatever the conditions: hard, soft or lumpy. It's a flex 4 tongue, equivalent to a 70 flex from other brands, so it's nice and soft, easy to flex and perfect for getting used to riding new terrain and building confidence in the park. The design of the shell and the Infinite Pivot also means that unlike 2-piece boots it never bottoms-out or blocks the flex, so there's less chance of shin bang and it helps increase control. It's a higher volume fit, suiting skiers wanting more space and can be heat moulded to shape and form even better to the skier's feet. The Intuition Wrap liner is easy to slip in and out of and is fully customisable to take the best possible shape for maximum comfort, as well as being one of the lightest and warmest liners on the market. This high level of customisation helps ensure great foothold, which is improved further by the 450 Heel Lock of the middle buckle that securely positions the heel in the rear of the boot.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The Method shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2's lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer. Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1800 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Method Pro is the go-to freestyle boot for anyone looking to prioritise comfort and all mountain performance, from first tracks to apres and everything in between. Using K2’s roomy, Method shell, it offers a 102mm forefoot (in 26.5), making it ideal for skiers needing a little more space in their boots. The plush Intuition Wrap liners are light, warm, and fully mouldable so can be customised to maximise the comfort and the foothold. It uses the classic 3-piece design, giving a smooth flex and excellent shock absorption whether riding park or all mountain; the Grilamid tongue ensures a consistent flex across a wide range of temperatures.Ability LevelOverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Wrap, mouldable. Made without the traditional tongue found in most liners, the wrap of the Intuition Wrap offers added comfort and performance The laminates are specifically engineered to be make K2’s lightest weight liner for increased manoeuvrability while maintaining its warmth and custom mouldable fit right out of the box. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.General InformationCategory: AlpineFlex: 100Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The 22/23 K2 Recon 100 mixes lightweight, comfort and performance, not an easy task but a combination that will appeal to any intermediate skier. This MV medium volume version is a 100mm last, suiting average width feet. To help achieve a great fit, it can be customised with a moulding process on the shell and liner, ensuring an even, all-over pressure for the closest, most comfortable shape and the best ski control. The Powerlite Shell keeps the performance level up and the weight down thanks to the use of 4 different stiffnesses of TPU and optimised wall thickness.Ability LevelBoots8OverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 100Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The BFC 120 is a rare breed of boot: resort orientated with plenty of features and wide fit, but with a stiff enough flex to support powerful skiers and stop them overbending the boot which can lead to foot and leg pains. With a 103mm last, straight of the box it will take a wide foot comfortably, and if more space is needed then both the liner and the shell and custom moulded during fitting to get more space and improve the shape. Getting in and out is easy thanks to the soft overlap material at the instep, and the Apres Mode 2.0 and GripWalk soles make getting around easy. The PU shell ensures good energy transfer for the performance to drive skis at speed and hold an edge.Ability LevelOverviewFitHigh volume fit with big instep and very roomy forefoot.ShellTPU shell, customisable. Using a TPU shell and PP cuff means the BFC 120 can be easily customised and has the power to drive skis, but it remains light and not over stiff.LinerCushFit Pro, mouldable. Maintains the renowned comfort of the original Cushfit liner, but with a notable increase in support and performance thanks to the use of Ultralon foam, similar to what is used in K2's Powerfit Pro and Precisionfit Pro liners.Key FeaturesHands Free entryDual material overlap for intuitive and easy hands-free exit and entry.Apres Mode 2.0A new and improved walk mode offering a massive 50-degree range of motion. A lever on the back of the boot unlocks the upper cuff from the lower shell, allowing for increased comfort and convenience when walking from the car to the liftGeneral InformationCategory: AlpineFlex: 120Last Width: 103Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1900 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The FL3X Revolver Pro is the freestyle option for skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or high-speed groomers. The Revolver shell uses the original Full Tilt / Raichle Flexon design, with a 99mm last, meaning good foothold and precise ski control. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex 6 tongue is equivalent to a 90 flex, ideal for use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. Finishing off this shock absorbing set-up is a soft rubber layer in the bottom of the shell that dampens vibrations. As well as the shell which can be heat moulded, the Intuition Pro Wrap liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, the tongue can be swapped for different flexes (sold separately) and the cables and buckles can be easily replaced if damaged.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Pro Wrap, mouldable. Made without the traditional tongue that is found in most liners, the wrap of the Intuition Pro Wrap offers added comfort and performance. Slip into the Intuition Pro Wrap, and experience unmatched ankle retention and pressure-free performance. 2mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell for warmth and comfort; 7mm Intuition high density foam for a responsive and efficient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!General InformationCategory: AlpineFlex: 100Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1920 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The FL3X Revolver Pro is the freestyle option for skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or high-speed groomers. The Revolver shell uses the original Full Tilt / Raichle Flexon design, with a 99mm last, meaning good foothold and precise ski control. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex 6 tongue is equivalent to a 90 flex, ideal for use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. Finishing off this shock absorbing set-up is a soft rubber layer in the bottom of the shell that dampens vibrations. As well as the shell which can be heat moulded, the Intuition Pro Wrap liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, the tongue can be swapped for different flexes (sold separately) and the cables and buckles can be easily replaced if damaged.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Pro Wrap, mouldable. Made without the traditional tongue that is found in most liners, the wrap of the Intuition Pro Wrap offers added comfort and performance. Slip into the Intuition Pro Wrap, and experience unmatched ankle retention and pressure-free performance. 2mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell for warmth and comfort; 7mm Intuition high density foam for a responsive and efficient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!General InformationCategory: AlpineFlex: 100Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1920 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The FL3X Revolver Pro is the freestyle option for skiers looking for the ultimate boot in any terrain from park to cliffs to bumps or high-speed groomers. The Revolver shell uses the original Full Tilt / Raichle Flexon design, with a 99mm last, meaning good foothold and precise ski control. The 3-piece construction ensures a super-smooth flex and removes any bottoming-out or blocking that you can get with a 2-piece alpine boot, making it perfect for landing jumps and drops, giving you the natural movement to remain balanced and able to absorb shocks. The flex 6 tongue is equivalent to a 90 flex, ideal for use in the park when pressing and buttering but with enough support to ski the rest of the mountain with control. Finishing off this shock absorbing set-up is a soft rubber layer in the bottom of the shell that dampens vibrations. As well as the shell which can be heat moulded, the Intuition Pro Wrap liner is fully mouldable too, ensuring the best shape and comfort, whilst also being exceptionally light and impressively warm. To complete the customisation both the forward lean and cuff alignment can be adjusted, the tongue can be swapped for different flexes (sold separately) and the cables and buckles can be easily replaced if damaged.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Pro Wrap, mouldable. Made without the traditional tongue that is found in most liners, the wrap of the Intuition Pro Wrap offers added comfort and performance. Slip into the Intuition Pro Wrap, and experience unmatched ankle retention and pressure-free performance. 2mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell for warmth and comfort; 7mm Intuition high density foam for a responsive and efficient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!General InformationCategory: AlpineFlex: 100Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1920 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The BFC 120 is a rare breed of boot: resort orientated with plenty of features and wide fit, but with a stiff enough flex to support powerful skiers and stop them overbending the boot which can lead to foot and leg pains. With a 103mm last, straight of the box it will take a wide foot comfortably, and if more space is needed then both the liner and the shell and custom moulded during fitting to get more space and improve the shape. Getting in and out is easy thanks to the soft overlap material at the instep, and the Apres Mode 2.0 and GripWalk soles make getting around easy. The PU shell ensures good energy transfer for the performance to drive skis at speed and hold an edge.Ability LevelOverviewFitHigh volume fit with big instep and very roomy forefoot.ShellTPU shell, customisable. Using a TPU shell and PP cuff means the BFC 120 can be easily customised and has the power to drive skis, but it remains light and not over stiff.LinerCushFit Pro, mouldable. Maintains the renowned comfort of the original Cushfit liner, but with a notable increase in support and performance thanks to the use of Ultralon foam, similar to what is used in K2's Powerfit Pro and Precisionfit Pro liners.Key FeaturesHands Free entryDual material overlap for intuitive and easy hands-free exit and entry.Apres Mode 2.0A new and improved walk mode offering a massive 50-degree range of motion. A lever on the back of the boot unlocks the upper cuff from the lower shell, allowing for increased comfort and convenience when walking from the car to the liftGeneral InformationCategory: AlpineFlex: 120Last Width: 103Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1900 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The BFC 120 is a rare breed of boot: resort orientated with plenty of features and wide fit, but with a stiff enough flex to support powerful skiers and stop them overbending the boot which can lead to foot and leg pains. With a 103mm last, straight of the box it will take a wide foot comfortably, and if more space is needed then both the liner and the shell and custom moulded during fitting to get more space and improve the shape. Getting in and out is easy thanks to the soft overlap material at the instep, and the Apres Mode 2.0 and GripWalk soles make getting around easy. The PU shell ensures good energy transfer for the performance to drive skis at speed and hold an edge.Ability LevelOverviewFitHigh volume fit with big instep and very roomy forefoot.ShellTPU shell, customisable. Using a TPU shell and PP cuff means the BFC 120 can be easily customised and has the power to drive skis, but it remains light and not over stiff.LinerCushFit Pro, mouldable. Maintains the renowned comfort of the original Cushfit liner, but with a notable increase in support and performance thanks to the use of Ultralon foam, similar to what is used in K2's Powerfit Pro and Precisionfit Pro liners.Key FeaturesHands Free entryDual material overlap for intuitive and easy hands-free exit and entry.Apres Mode 2.0A new and improved walk mode offering a massive 50-degree range of motion. A lever on the back of the boot unlocks the upper cuff from the lower shell, allowing for increased comfort and convenience when walking from the car to the liftGeneral InformationCategory: AlpineFlex: 120Last Width: 103Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1900 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new K2 FL3X Method B&e is designed by Phil Casabon and Henrik Harlaut to perfectly match their needs whether in the park or on urban terrain. The shell has a generous 102mm forefoot, suiting skiers with wider feet who are searching for a more comfortable fit. If required it can be heat moulded to better shape to the skier's feet, ironing out any little pressure points. The Intuition Pro Wrap liner is both light and warm, but more importantly it is fully mouldable to take the very best shape and ensure the most comfortable fit. The 3-piece design is perfect for freestyle with a smooth consistent flex that doesn't bottom out like regular 2-piece shells, meaning it improves control and reduces shin bang. A soft rubber layer in the sole of the boot absorbs vibrations and impacts to create a smoother ride. The flex of 90 is ideal for the park, with the support for bigger features but the flex to push the butters. It's the perfect boot for freestyle skiers with wider feet.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Pro Wrap, mouldable. Built using authentic Intuition closed-cell foam. It is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded instore in minutes for a light, warm and super comfortable fit. The Pro Wrap's specifically engineered to provide the most energy transfer to the shell while maintaining warmth in a custom mouldable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control. The foam is listed here from foot to shell: 4mm Open Cell, ensures warmth and comfort straight out of the box; 2mm Intuition MD Foam, medium density and hardness for a solid balance of comfort and performance; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. An additional layer of ergonomically shaped eVA (Powerwrap) is wrapped around the outside of the upper liner to increase energy transfer and horsepower to the shell.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.Mid GripWhether you are climbing grated stairs or scrambling on top of a mountain, a dual material or single material mid-grip gives you the confidence to stay on your feet.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Cam Volume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new K2 FL3X Method B&e is designed by Phil Casabon and Henrik Harlaut to perfectly match their needs whether in the park or on urban terrain. The shell has a generous 102mm forefoot, suiting skiers with wider feet who are searching for a more comfortable fit. If required it can be heat moulded to better shape to the skier's feet, ironing out any little pressure points. The Intuition Pro Wrap liner is both light and warm, but more importantly it is fully mouldable to take the very best shape and ensure the most comfortable fit. The 3-piece design is perfect for freestyle with a smooth consistent flex that doesn't bottom out like regular 2-piece shells, meaning it improves control and reduces shin bang. A soft rubber layer in the sole of the boot absorbs vibrations and impacts to create a smoother ride. The flex of 90 is ideal for the park, with the support for bigger features but the flex to push the butters. It's the perfect boot for freestyle skiers with wider feet.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Pro Wrap, mouldable. Built using authentic Intuition closed-cell foam. It is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded instore in minutes for a light, warm and super comfortable fit. The Pro Wrap's specifically engineered to provide the most energy transfer to the shell while maintaining warmth in a custom mouldable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control. The foam is listed here from foot to shell: 4mm Open Cell, ensures warmth and comfort straight out of the box; 2mm Intuition MD Foam, medium density and hardness for a solid balance of comfort and performance; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. An additional layer of ergonomically shaped eVA (Powerwrap) is wrapped around the outside of the upper liner to increase energy transfer and horsepower to the shell.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.Mid GripWhether you are climbing grated stairs or scrambling on top of a mountain, a dual material or single material mid-grip gives you the confidence to stay on your feet.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Cam Volume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new K2 FL3X Method B&e is designed by Phil Casabon and Henrik Harlaut to perfectly match their needs whether in the park or on urban terrain. The shell has a generous 102mm forefoot, suiting skiers with wider feet who are searching for a more comfortable fit. If required it can be heat moulded to better shape to the skier's feet, ironing out any little pressure points. The Intuition Pro Wrap liner is both light and warm, but more importantly it is fully mouldable to take the very best shape and ensure the most comfortable fit. The 3-piece design is perfect for freestyle with a smooth consistent flex that doesn't bottom out like regular 2-piece shells, meaning it improves control and reduces shin bang. A soft rubber layer in the sole of the boot absorbs vibrations and impacts to create a smoother ride. The flex of 90 is ideal for the park, with the support for bigger features but the flex to push the butters. It's the perfect boot for freestyle skiers with wider feet.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Pro Wrap, mouldable. Built using authentic Intuition closed-cell foam. It is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded instore in minutes for a light, warm and super comfortable fit. The Pro Wrap's specifically engineered to provide the most energy transfer to the shell while maintaining warmth in a custom mouldable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control. The foam is listed here from foot to shell: 4mm Open Cell, ensures warmth and comfort straight out of the box; 2mm Intuition MD Foam, medium density and hardness for a solid balance of comfort and performance; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. An additional layer of ergonomically shaped eVA (Powerwrap) is wrapped around the outside of the upper liner to increase energy transfer and horsepower to the shell.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.Mid GripWhether you are climbing grated stairs or scrambling on top of a mountain, a dual material or single material mid-grip gives you the confidence to stay on your feet.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Cam Volume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new K2 FL3X Method B&e is designed by Phil Casabon and Henrik Harlaut to perfectly match their needs whether in the park or on urban terrain. The shell has a generous 102mm forefoot, suiting skiers with wider feet who are searching for a more comfortable fit. If required it can be heat moulded to better shape to the skier's feet, ironing out any little pressure points. The Intuition Pro Wrap liner is both light and warm, but more importantly it is fully mouldable to take the very best shape and ensure the most comfortable fit. The 3-piece design is perfect for freestyle with a smooth consistent flex that doesn't bottom out like regular 2-piece shells, meaning it improves control and reduces shin bang. A soft rubber layer in the sole of the boot absorbs vibrations and impacts to create a smoother ride. The flex of 90 is ideal for the park, with the support for bigger features but the flex to push the butters. It's the perfect boot for freestyle skiers with wider feet.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Pro Wrap, mouldable. Built using authentic Intuition closed-cell foam. It is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded instore in minutes for a light, warm and super comfortable fit. The Pro Wrap's specifically engineered to provide the most energy transfer to the shell while maintaining warmth in a custom mouldable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control. The foam is listed here from foot to shell: 4mm Open Cell, ensures warmth and comfort straight out of the box; 2mm Intuition MD Foam, medium density and hardness for a solid balance of comfort and performance; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. An additional layer of ergonomically shaped eVA (Powerwrap) is wrapped around the outside of the upper liner to increase energy transfer and horsepower to the shell.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.Mid GripWhether you are climbing grated stairs or scrambling on top of a mountain, a dual material or single material mid-grip gives you the confidence to stay on your feet.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Cam Volume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
K2’s Anthem 105 GW is at the front of a new wave of advanced ski boots that offer lightness, fit, comfort and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet during fitting.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerPrecisionFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar for a firm but comfortable performance fit.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Women's adjustable CalfAdjustable rear cuff support for Anthem boots that can be customized to fit with any calf shape.General InformationCategory: AlpineFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
K2’s Anthem 105 GW is at the front of a new wave of advanced ski boots that offer lightness, fit, comfort and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet during fitting.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerPrecisionFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar for a firm but comfortable performance fit.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Women's adjustable CalfAdjustable rear cuff support for Anthem boots that can be customized to fit with any calf shape.General InformationCategory: AlpineFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
K2’s Anthem 105 GW is at the front of a new wave of advanced ski boots that offer lightness, fit, comfort and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet during fitting.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shapeShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities.LinerPrecisionFit Pro, customisable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar for a firm but comfortable performance fit.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Women's adjustable CalfAdjustable rear cuff support for Anthem boots that can be customized to fit with any calf shape.General InformationCategory: AlpineFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1560 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The new K2 FL3X Method B&e is designed by Phil Casabon and Henrik Harlaut to perfectly match their needs whether in the park or on urban terrain. The shell has a generous 102mm forefoot, suiting skiers with wider feet who are searching for a more comfortable fit. If required it can be heat moulded to better shape to the skier's feet, ironing out any little pressure points. The Intuition Pro Wrap liner is both light and warm, but more importantly it is fully mouldable to take the very best shape and ensure the most comfortable fit. The 3-piece design is perfect for freestyle with a smooth consistent flex that doesn't bottom out like regular 2-piece shells, meaning it improves control and reduces shin bang. A soft rubber layer in the sole of the boot absorbs vibrations and impacts to create a smoother ride. The flex of 90 is ideal for the park, with the support for bigger features but the flex to push the butters. It's the perfect boot for freestyle skiers with wider feet.Ability LevelBoots10OverviewFitGenerally an average feel, but with a slightly more generous forefoot width. Cabrio constructions allows for some flexibilty over the height of the instep.ShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption. The evolution shell provides more internal space than the Original version.LinerIntuition Pro Wrap, mouldable. Built using authentic Intuition closed-cell foam. It is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded instore in minutes for a light, warm and super comfortable fit. The Pro Wrap's specifically engineered to provide the most energy transfer to the shell while maintaining warmth in a custom mouldable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control. The foam is listed here from foot to shell: 4mm Open Cell, ensures warmth and comfort straight out of the box; 2mm Intuition MD Foam, medium density and hardness for a solid balance of comfort and performance; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. An additional layer of ergonomically shaped eVA (Powerwrap) is wrapped around the outside of the upper liner to increase energy transfer and horsepower to the shell.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.Ladder BuckleThe ladder buckle features an intuitive, easy to remember, macro-size adjustment, plus a micro-twist for fine adjustment with a light, easy-to-handle aluminum lever.Mid GripWhether you are climbing grated stairs or scrambling on top of a mountain, a dual material or single material mid-grip gives you the confidence to stay on your feet.General InformationCategory: AlpineFlex: 90Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: Cam Volume: HighClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 2000 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
the 22/23 season K2 Mindbender 95 W GW suits all mountain and freeride skiers looking for a versatile boot that has an easy to manage flex and a medium fit. The Powerlock Spyne walk mechanism creates a 50° range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the LuxFit Pro Tour liner is moulded in store too, further improving comfort and foot hold.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerLuxeFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package with a flex notch for increased range of motion when hiking.Key FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Low-MediumClips: n/aSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
K2’s Anthem BOA 95 is 23/24 season model that is released early, and exclusively, through ellis Brigham in the UK. This a boot that will appeal to advanced and intermediate skiers who want the best in terms of comfort, convenience, and performance. It ditches the clips over the foot and instead uses a BOA system. This BOA Fit System provides a performance fit engineered to enhance feel and responsiveness while reducing pressure points by incrementally modulating the Alpine boot closure with precise micro-adjustments. Just push in to engage, turn to tighten or loosen, and pull up for fast release. This connected fit uniformly wraps the foot and minimizes downward pressure, increasing heel lock-down for improved power and edge-to-edge control. Not only is the fit impressive, but so is the balance of lightness and performance. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. Comfort isn’t just coming from the BOA, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelBoots10OverviewFitAverage fit around the rear foot and over the instep, The MultiFit Last helps to reduce volume in the midfoot to forefoot area, round toe shape.ShellTPU shell, customisable. Using a TPU shell means they can be easily customised and has the power to drive skis, but it remains light and not over stiff with excellent rebound.LinerLuxFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Features pre-moulded ankle pockets and a medium density collar and foam package offering performance with comfort.Key FeaturesBOA Fit SystemThe BOA® Fit System delivers dialed in performance and a micro-adjustable precision fit. It consists of three integral parts: a micro-adjustable dial, lightweight yet extremely strong laces and low-friction lace guides, which are applied in uniquely designed configurations to improve the fit and performance of the boot.BOA DialThe dial provides micro-adjustable, precision fit and quick release, with quality and durability guaranteed. The BOA dial platform features a breakaway design engineered to eject the dial cartridge upon severe impact without damaging the system, allowing skiers to pop the dial back into the bayonet mid-mountain. In the unlikely event that the system is broken, it can be easily repaired and replaced.BOA LaceThe lace is built to withstand skiing the toughest terrain, season after season. Made of stainless steel, SS3 is BOA’s strongest, most durable lace, boasting a tensile strength of more than 254kg.BOA GuidesHeavy-duty guides to ensure a smooth and precise fit, with low friction tightening and loosening.MultiFit LastThe MultiFit Last was developed in conjunction with the BOA® Fit System to accommodate a variety of foot shapes ranging from 97mm to 100mm eliminating the need for multiple last options for lower and medium volume feet.Modular Honeycomb Boot Board with Hard & Soft InsertsStay warmer, longer. Traps heat and insulates like a down jacket. Retains heat 15% better than a traditional boot board, Harshmellow™ Inserts provide soft or rigid inserts in the heel allowing the rider to customise the feel and responsiveness depending on personal preference; softer insert for extra damping or a more rigid insert for improved power transfer.General InformationCategory: AlpineFlex: 95Last Width: 97-100 + 4mmCustom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; BOA Closure On ClogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1580 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Sammy Carlson's FL3X Diverge SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Tour Pro Wrap Liner, removable 120 Flex Tongue and lightweight evolution 3-Piece Shell work together to make the Diverge SC progressive and innovative within the resort ropes and beyond.Ability LevelOverviewFitA slighlty more relaxed feel compared to most tour/backcountry boots. Medium volume around the rear foot and generous in the forefoot with some adaptability over the instep because of the cabrio design.ShellTPU / Grilamid shell and tongue, mouldable. Featuring a higher back cuff and lightweight Grilamid plastic, this construction will take you anywhere. FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerTour Pro Wrap, mouldable. With a Tour Flex Notch, removable external J-Bars, lacing system, and power strap, the Tour Pro makes walking a blister-free experience in an enveloping, snug fit. The foam is listed here from foot to shell: 2mm Intuition MD, medium density and hardness for a solid balance of comfort and performance; 4mm Open Cell, ensures warmth and comfort straight out of the box; 7mm Intuition HD Foam, high density and firm for a responsive and efficient transfer of energy. This Intuition closed cell foam is body heat activated to mould 100% to your feet and shells during use, or can be instantly heat moulded by a shop in minutes for a light, warm and super comfortable fit. J-Bars are additional j-shaped piece of foam that is inserted internally on both sides of the ankle area to dramatically increase ankle hold down, to keep your feet perfectly in place for precise control.Key FeaturesWide ToeA thinner foam is used in the front of the liner to increase space without sacrificing control for people with wider feet or who prefer a little more toe room.GripWalk OutsoleDesigned for a better purchase on unstable and slippery terrain. The convex shape and ribbed tread add both comfort and grip for getting from house to hill to peak.Tour Hook and Flipped Bottom BuckleKeep your buckles in place without impinging upon the full cuff rotation. The bottom buckle is flipped to sit on top of the boot. This keeps the buckle out of the way when you are leaning heavily into a turn, walking in deeper snow, going through narrow gaps, broken sliding on a rail, and more! Ribbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!Walk ModeFlip the lever up to ascend with ease. And when it's time to send it, flip the lever down, lock the cuff in place, and push into the fluid, progressive flex you've come to expect from FL3X. Works great for aprés bar sessions too.Shock Absorber Boot BoardA soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.General InformationCategory: BackcountryFlex: 120Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: HighClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1940 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
K2's Mindbender 120 returns unchanged for 22/23 except for a graphic makeover. It's a boot that suits all mountain and freeride skiers looking for a versatile option with a medium fit. The Powerlock Spyne walk mechanism creates a 50 degree range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the PrecisionFit Pro Tour liner is moulded in store too, further improving comfort and foot hold. The Pebax cuff ensures a consistent flex across a range of temperatures; the 45mm Ripcord Power Cinch is effective and easy to use.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring an asymmetric tongue, pre-moulded ankle pockets, high-density power collar and a flex notch for increased range of motion when hikingKey FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: Low-MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1675 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
K2's Mindbender 120 returns unchanged for 22/23 except for a graphic makeover. It's a boot that suits all mountain and freeride skiers looking for a versatile option with a medium fit. The Powerlock Spyne walk mechanism creates a 50 degree range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the PrecisionFit Pro Tour liner is moulded in store too, further improving comfort and foot hold. The Pebax cuff ensures a consistent flex across a range of temperatures; the 45mm Ripcord Power Cinch is effective and easy to use.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring an asymmetric tongue, pre-moulded ankle pockets, high-density power collar and a flex notch for increased range of motion when hikingKey FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: Low-MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1675 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
K2's Mindbender 120 returns unchanged for 22/23 except for a graphic makeover. It's a boot that suits all mountain and freeride skiers looking for a versatile option with a medium fit. The Powerlock Spyne walk mechanism creates a 50 degree range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the PrecisionFit Pro Tour liner is moulded in store too, further improving comfort and foot hold. The Pebax cuff ensures a consistent flex across a range of temperatures; the 45mm Ripcord Power Cinch is effective and easy to use.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring an asymmetric tongue, pre-moulded ankle pockets, high-density power collar and a flex notch for increased range of motion when hikingKey FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: Low-MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1675 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
If your idea of fun is hunting the best snow and putting in the effort to get it, then look no further as the new K2 dispatch has everything you need. The heat mouldable shell and Tourfit liner provides excellent customisation for comfort and features like Friction Free Cuff, Vibram soles and a 60 degree range of motion walk mode create an intuitive uphill experience. Its Pebax cuff provides a forgiving progressive 110 flex that feels more akin to a regular alpine ski boot, unlike some lightweight tour boots which can sometimes feel a bit rigid. This is an excellent choice as a first-time tour boot for adventurous skiers. Ability LevelTour2OverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1520 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
If your idea of fun is hunting the best snow and putting in the effort to get it, then look no further as the new K2 dispatch has everything you need. The heat mouldable shell and Tourfit liner provides excellent customisation for comfort and features like Friction Free Cuff, Vibram soles and a 60 degree range of motion walk mode create an intuitive uphill experience. Its Pebax cuff provides a forgiving progressive 110 flex that feels more akin to a regular alpine ski boot, unlike some lightweight tour boots which can sometimes feel a bit rigid. This is an excellent choice as a first-time tour boot for adventurous skiers. Ability LevelTour2OverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1520 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
If your idea of fun is hunting the best snow and putting in the effort to get it, then look no further as the new K2 dispatch has everything you need. The heat mouldable shell and Tourfit liner provides excellent customisation for comfort and features like Friction Free Cuff, Vibram soles and a 60 degree range of motion walk mode create an intuitive uphill experience. Its Pebax cuff provides a forgiving progressive 110 flex that feels more akin to a regular alpine ski boot, unlike some lightweight tour boots which can sometimes feel a bit rigid. This is an excellent choice as a first-time tour boot for adventurous skiers. Ability LevelTour2OverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1520 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
If your idea of fun is hunting the best snow and putting in the effort to get it, then look no further as the new K2 dispatch has everything you need. The heat mouldable shell and Tourfit liner provides excellent customisation for comfort and features like Friction Free Cuff, Vibram soles and a 60 degree range of motion walk mode create an intuitive uphill experience. Its Pebax cuff provides a forgiving progressive 110 flex that feels more akin to a regular alpine ski boot, unlike some lightweight tour boots which can sometimes feel a bit rigid. This is an excellent choice as a first-time tour boot for adventurous skiers. Ability LevelTour2OverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1520 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
If your idea of fun is hunting the best snow and putting in the effort to get it, then look no further as the new K2 dispatch has everything you need. The heat mouldable shell and Tourfit liner provides excellent customisation for comfort and features like Friction Free Cuff, Vibram soles and a 60 degree range of motion walk mode create an intuitive uphill experience. Its Pebax cuff provides a forgiving progressive 110 flex that feels more akin to a regular alpine ski boot, unlike some lightweight tour boots which can sometimes feel a bit rigid. This is an excellent choice as a first-time tour boot for adventurous skiers. Ability LevelTour2OverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 110Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1520 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
K2's new Dispatch W is squarely aimed at female tourers who value uphill performance as much as downhill. At 105 flex with a 100mm last they suit a strong skier with medium volume feet. A fully mouldable shell and Tourfit liner means that you can dial in the fit for maximum comfort. The Powerlock 2.0 with 60 degrees range of motion, Vibram soles and Friction Free Cuff tell you this is a seriously functional tour boot and would be an ideal option for skiers who do not want to compromise on performance, be it going on a long tour or getting freshies in your favourite powder stash. Ability LevelOverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1445 (1/2 pair size 24.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
K2's new Dispatch W is squarely aimed at female tourers who value uphill performance as much as downhill. At 105 flex with a 100mm last they suit a strong skier with medium volume feet. A fully mouldable shell and Tourfit liner means that you can dial in the fit for maximum comfort. The Powerlock 2.0 with 60 degrees range of motion, Vibram soles and Friction Free Cuff tell you this is a seriously functional tour boot and would be an ideal option for skiers who do not want to compromise on performance, be it going on a long tour or getting freshies in your favourite powder stash. Ability LevelOverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1445 (1/2 pair size 24.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
K2's new Dispatch W is squarely aimed at female tourers who value uphill performance as much as downhill. At 105 flex with a 100mm last they suit a strong skier with medium volume feet. A fully mouldable shell and Tourfit liner means that you can dial in the fit for maximum comfort. The Powerlock 2.0 with 60 degrees range of motion, Vibram soles and Friction Free Cuff tell you this is a seriously functional tour boot and would be an ideal option for skiers who do not want to compromise on performance, be it going on a long tour or getting freshies in your favourite powder stash. Ability LevelOverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1445 (1/2 pair size 24.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
K2's new Dispatch W is squarely aimed at female tourers who value uphill performance as much as downhill. At 105 flex with a 100mm last they suit a strong skier with medium volume feet. A fully mouldable shell and Tourfit liner means that you can dial in the fit for maximum comfort. The Powerlock 2.0 with 60 degrees range of motion, Vibram soles and Friction Free Cuff tell you this is a seriously functional tour boot and would be an ideal option for skiers who do not want to compromise on performance, be it going on a long tour or getting freshies in your favourite powder stash. Ability LevelOverviewFitAverage fit all over with toe space and a generous instep ShellPowerlite Tour Shell. eco-Friendly Pebax Upper Cuff and Shell, mouldable. Consistent flex across a wide range of temperatures.LinerTourfit, mouldable. Lightweight, hard charging construction inspired by the Lux Fit Tour liners. Pre moulded ankle bumps for added fit and fully heat mouldable with asymmetric tongue.Key FeaturesPowerlock 2.0 Improved walk mechanism with locking lever, 9-15 degrees of forward lean adjustability and 60 degrees ROM. Vibram Outsoles Designed with adventure in mind. Superior grip and durability. K2 exclusive tread pattern. 9523 iso DIN. Honeycomb Bootboard Stay Warmer, Longer. Traps heat and insulates like a down jacket. Retains heat 15% better than traditional bootboard. Boot-fitter friendly Friction Free Pivot An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode. General InformationCategory: BackcountryFlex: 105Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: MediumClips: 4 x MicroadjustableSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1445 (1/2 pair size 24.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
K2's Mindbender 120 returns unchanged for 22/23 except for a graphic makeover. It's a boot that suits all mountain and freeride skiers looking for a versatile option with a medium fit. The Powerlock Spyne walk mechanism creates a 50 degree range of motion for hiking and provides a powerful connection when skiing. The Powerlite shell is light and responsive and can be heat moulded to create a custom fit; the PrecisionFit Pro Tour liner is moulded in store too, further improving comfort and foot hold. The Pebax cuff ensures a consistent flex across a range of temperatures; the 45mm Ripcord Power Cinch is effective and easy to use.Ability LevelOverviewFitA slightly lower than average fit across the forefoot width with most other areas fitting more towards average.ShellTPU Powerlite Shell, mouldable. This totally new shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro Tour, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring an asymmetric tongue, pre-moulded ankle pockets, high-density power collar and a flex notch for increased range of motion when hikingKey FeaturesPowerlock SpyneRugged, precise and intuitive. The Powerlock Spyne walk mechanism allows for 50 degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Friction Free PivotLow friction cuff pivot to ease range of motion.GripWalk OutsolesRemovable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiingGeneral InformationCategory: BackcountryFlex: 120Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: Low-MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 50Weight (g): 1675 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
AddThis
AddThis

Copyright Interhike. All rights reserved.