Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
Nordica haven't just resurrected rear entry boots they have totally reworked the concept with the HF 110. Rear entry boots were always popular because they were so simple to get in and out of; in this case HF stands for Hands Free and getting them on and off really is that easy. This special model is also notably light and provides good foot hold for medium and wide feet thanks to clever shaping, some cool features and the excellent custom fitted, pre-formed and impressively warm 3D Cork Fit PrimaLoft liner.Ability LevelOverviewFitMedium ankle pocket provides good heel hold, a medium to wide forefoot and and average to high instep. Round toe shape.Shell Infrared PU shell and cuff, mouldable. The HF shell makes performance skiing easy. Using a rear-entry design makes getting the boot on and off exceptionally easy, as well as very simple to clip-up. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit PrimaLoft, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable.Key FeaturesHF Buckle Closure and easy entryHF means Hands Free. Light, good looking, but especially sleek and well designed. The monolock buckle has never been so intuitive, it's just a matter of pushing it down with your foot and you are done. At the end of your day, you can use your pole to open the back buckle while you remain standing. The easy Closure creates a huge 40degree opening to ensure it is hassle-free slipping your foot in and out - especially useful for skiers with limited ankle movement.Double Axis PivotThe cuff and the shell of the new HF are specially designed to provide the perfect closure between the cuff parts and the shell. The alignment between the 2 provides unmatched lateral support for immediate ski response. This means easier turns, more stability, perfect control and more fun.IVC Instep Volume ControlAn adjustable wedge is integrated into the footboard of the boot, when it is flipped into position it increases the height of board by 4mm to remove any excess space over the instep, improving foot hold and comfort, decreasing the need to over-tighten.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.Waterproof SystemA 3-layer approach to keep the shell weather tight. Bi-injection construction improves the wrapping, a waterproof layer prevents water leaking in and is assisted by an external shield protectMichelin GripWalk SolesGripWalk soles offer rocker and grip for comfortable hiking; Michelin compounds increase the durability and traction.SpecificationCategory: AlpineFlex: 110Last Width: 102Custom Shell: YesCustom Liner: YesPower Strap: n/aVolume: HighClips: 1 x HF Back Buckle, 1 x Instep BuckleSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: YesWeight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, Multi Norm (Fitted with GripWalk sole) [Full Details]
the 22/23 version of K2's Recon 120 remains at the very front of a new wave of advanced ski boots that offer lightness, fit and performance in equal measures. Previously lighter boots could suffer a noticeable loss of control and precision, and advanced and expert boots would feel heavy. This is not the case anymore thanks to the Powerlite Shell. 4 different stiffnesses of TPU and optimal wall thickness come together to provide the lowest possible weight and the best performance. To ensure comfort, both the shell and the liner can be custom moulded to the skier's feet for the best fit.Ability LevelOverviewFitAverage fit around the rear foot and over the instep, medium to wide on the forefoot, round toe shape.ShellTPU Powerlite Shell, customisable. This shell is purpose-built to result in the best skiing, lightest boots produced. Made with 4 different stiffnesses of TPU and optimised wall thickness profiling, the Powerlite Shell manages to achieve a tricky balance between lightweight agility and power. The end product, some of the lightest boots on the market that ski with all the power and drive of heavier models. Rounded out with FastFit ease of entry and full TPU boot fitter customisation capabilities.LinerPrecisionFit Pro, mouldable. Pre-moulded and lasted with Ultralon heat-mouldable foam. Featuring a stiffer foam and upper, asymmetric tongue, pre-moulded ankle pockets and high-density power collar.Key FeaturesPowerfuse SpyneA rear co-injected ‘Y' shaped support that adds strength and power to the energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.energy InterlockA rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.Fast Fit entrySofter TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.Navicular PunchA strategic bump is built into the boot mould to alleviate pressure commonly experienced during ankle flexion.Power WedgeA removable spoiler for an adjustable forward lean angle, ranging from 12° to 14°.General InformationCategory: AlpineFlex: 120Last Width: 100Custom Shell: YesCustom Liner: YesPower Strap: CamVolume: MediumClips: 4 x MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1650 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Available right now, exclusively at ellis Brigham, the brand new 2024 Nordica Unlimited 120 DYN fuses the ski-ability of traditional alpine boots with the uphill capabilities of tour models. A Triax and PU shell offers a powerful yet lightweight feel, but with a smooth and more forgiving flex compared to the lighter, firmer plastics used in some more tour dedicated models. TriForce construction uses softer plastics to provide excellent wrap around the foot and stiffer plastics provide the power that good skiers need; a cable closure on the lower foot easily switches from tightened for downhill skiing to a loser touring feel with an easy flick of the toe clip. Boot to binding compatibility can be a bit of a minefield especially when it comes to tour/backcountry boots, but with the Unlimited Sole design it’s a fuss-free experience with full-length GripWalk soles that offer excellent traction and can be unscrewed should they ever need replacing. Infrared fit technology makes it easy to tweak the snug yet comfortable 99mm last for the perfect fit and a 3D Cork Fit Primaloft® Light liner boosts comfort and foot hold. Full of tech and easy to use features these boots are the ultimate choice for the adventurous skier looking for one boot that does it all.Ability LevelTour4OverviewFitMedium ankle and heel pocket, average instep height with a medium width forefoot and round toe shape.ShellInfrared PU shell and Triax cuff. PU provides a smooth flex and Triax is a light material that provides the necessary support without being over stiff, perfect for good skiers wanting to reduce their set-up weight. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.Liner3D Cork Fit Primaloft® Light, mouldable. engineered with the combination of a natural cork compound and an anatomical pre-shaped 3D laminate, Custom Cork liners create the perfect balance between comfort and performance while being completely customisable. Primaloft offers exceelent warmth to weight ratio for keeping feet comfortable even when the temperatures drop. PVC free.Key FeaturesTri-Force ConstructionNordica’s Unlimited boots are shaped by both new ideas and the distillation of proven technologies. After all, sometimes the answers we seek begin with what we already know. For proof, look no further than the Tri Force Cuff found on the new Unlimited boots. Through the years, Nordica have leveraged theirr Tri Force Construction to create a range of boots tailored to the unique needs of today’s skiers. By strategically positioning three different densities of materials – a feat done by no one else in the game – Nordica’s Tri Force Cuff Construction boosts the fit and performance of a boot while minimizing weight. A softer front cuff panel wraps the shin to enhance fit and ensures a smooth flex when skiing and optimizes mobility when hiking. The cuff’s mid layer provides lateral support and helps boost energy transmission. Lastly, an exceptionally stiff spine supports the ski-walk mechanism to maximize power, control, and response. For the Unlimited boots, they developed a Tri Force Cuff that maximizes comfort and performance whether you’re skiing, skinning, or hiking. And needless to say, it also maximizes your fun.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Hike MechanismPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.Wrapping BootsThe little things matter. And often, these little things ultimately aren’t so little. This is especially true for the buckles on the Unlimited boots. Guided by a commitment to enriching your adventures, Nordica reimagined how the buckles on these boots perform. And in doing this, they improved the fit, efficiency, and durability of the boots. Instead of classical bales, the Unlimited boots feature a streamlined wire closure system that cradles your foot to offer a precise fit that boosts comfort and control. When it’s time to hike, skin, or just loosen up your boots, you can simply undo the quick-release power strap and flip up the toe buckle to release the closure system, which loosens the lower shell for greater comfort and mobility. And to further reduce weight and provide a consistent and reliable fit, the remaining buckles on the boot use a special magnesium alloy. Buckle up–and never look back–with Nordica’s Unlimited boots.SoleTo be worthy of adventure, a touring boot must be capable of not just enduring but also excelling in the diverse terrain it will inevitably encounter. Guided by this belief, Nordica set out to develop an entirely new sole for our Unlimited boots – a sole that was as versatile as it was durable. It had to offer exceptional grip to ensure it could withstand hiking in the most treacherous terrain – be that a rocky summit, high-stakes glacial traverse, or a parking lot coated in ice. Yet it also had to interface perfectly with countless binding systems while maximizing safety and control. This led to the creation of a sole that provides the legendary traction and performance of the Michelin Gripwalk system while also featuring DYN inserts. This sole is compatible with both ISO Gripwalk and alpine touring standards. And thanks to its screw-on design, the sole can readily be replaced to maximize the longevity of the boot. No matter how you define adventure–or where you pursue it–you can depend on Nordica’s Unlimited soles. [Full Details]
£560
From Ellis Brigham
Blending the comfort and power of the proven Prime range with the lightness and natural movement of the XTD and Backland models, the Hawx Prime XTD is where all mountain skiing meets freeride and backcountry. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the excellent Mimic Platinum liner uses a unique process to take an impressive mould of the heel and ankle area for the best comfort and control. Comes with Grip Walk soles and tech insoles so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell True Flex PU shell and PU cuff, mouldable. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 115Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 40mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1575 (1/2 pair size 24.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Ski Boots - Compare Prices
£85
From Ellis Brigham
Salomon's S/Race 60 M takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm; 4 aluminium clips hold the foot neatly in place.Ability LevelBoots7OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1550Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£90
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£110
From Ellis Brigham
Salomon's S/Race 60 T takes its inspiration from their successful race line-up and tunes it to younger less experienced skiers. The Polyolefin plastic shell and cuff are light but still have the right level of support; the cuff is shorter than an adult boot so that it does place too much force onto the leg. The thinner construction of the shell keeps the weight down, aids entry and exit and ensures good control and agility. The My ThermicFit Jr liner is comfy and warm. 4 aluminium clips hold the foot neatly in place, aided by the 28mm powerstrap on the leg that keeps the shin and tibia comfortably in contact.Ability LevelBoots8OverviewFitSalomon's junior last is designed for kid's feet. A medium fit all over it holds the heel well without excess instep pressure or being too tight across the toes.ShellPolyolefin shell and cuff. Polyolefin is a durable material that provides lightness and stability, ideal for a boot at this level.LinerMy ThermicFit Jr. The Thermic Fit Junior liner has pre-formed zones which protect the tibia and forefoot, while also providing good comfort and warmth. With use and over time it will shape naturally to the skier's foot.Key FeaturesTwinframeThanks to its bi-material construction of the Twinframe design, the hard chassis part delivers power transmission and precision, while the softer upper part offers better wrapping for increased comfort.Riveted Oversize PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.General InformationCategory: AlpineFlex: 60Last Width: Kids lastCustom Shell: NoCustom Liner: NoPower Strap: Velcro 28mmVolume: MediumClips: 4 x PlasticSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1940Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
Salomon raised the bar with the S/MAX 100: lighter, stronger, with increased sensitivity and even more effective customisation compared to previous models and the competition. The Coreframe construction positions a stiff internal frame close to foot for power and direct energy transmission. A softer Custom Shell HD material wraps the foot and is moulded and customised in-store. A complete process taking just 10 minutes. The seamless Custom Fit 3D Sport liner adds extra personalisation as well as warmth. A big hit with good skiers wanting a slimmer fit.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Perf, customisable. New anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1780 (1/2 pair size 26.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 120 is Salomon’s option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: 45mmVolume: Medium-HighClips: n/aSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1750Binding Compatibility: Alpine, Grip Walk, Walk To Ride, Multi Norm [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£300
From Ellis Brigham
The S/PRO Alpha 80 W is Salomon’s newest intermediate alpine boot. A model that is instantly comfortable thanks to clever design, as well as packing the performance to tackle anything the mountain sends your way. The shell uses thinner plastics to keep the weight down and the let the foot sit closer to the boot for more control. Over the instep, the buckles have been moved to allow more space, reducing the pressure on what is a sensitive part of the foot, also helping lock the heel in securely. The CustomFit 3D Sport liner is pre-shaped around the ankles and can be heat moulded to optimise the fit. extra customisation comes from the 4 micro-adjustable buckles, macro-adjustable leg buckles and the calf adjuster that allows fitting options in both the perimeter and height. Perfect for cruising blues, charging down reds or tackling some black runs.Ability LevelBoots8OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Shell and Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Sport, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Sport liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle5 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 80Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 100 is one of the bestselling intermediate and advanced boots of the last decade thanks to a perfect mix of comfort and performance. Custom Shell HD is a fast and effective way of custom moulding a shell to improve the fit; the pre-formed seamless liner is warm, light and comfortable, and ready to be heat moulded during fitting. In fact, the whole boot is light due to the Coreframe construction that places a stiff frame close to the foot so there’s no loss of power.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.ShellPU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity and good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Performance, mouldable. New anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.General InformationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1800 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 90 W is a key model in our line-up of boots. The first thing of note is the lightness. The thickness of the plastic is reduced to save weight but the addition of a light, yet very strong Coreframe 360o guarantees strength and power. This construction ensures that the shell can be shaped precisely to produce the right mix of foot hold and comfort. Custom Shell HD is used, meaning the boot can be moulded simply and very effectively to better match the skier's foot. The liner is custom-fitted too, and uses a seamless, pre-formed shape to create a remarkably comfortable feel straight out of the box. A Sense Amplifier cuff guarantees a progressive feel in the boot when flexing, improving the rebound and response. It's a boot that makes a lot of skiers very happy.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Perf, customisable. Anatomically designed pre-shaped Perf liner without internal and external stiches. Improves foothold, steering and ensure a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 90Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1620 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£340
From Ellis Brigham
The S/PRO Alpha 90 W is an all-new boot from Salomon, designed for alpine skiers who are looking for a slimmer fit, great performance and impressive comfort. The new shell keeps the heel hold you would expect of a boot like this and, thanks to thinner plastic and clever buckle design, reduces any potential pressure spots on the top of the instep. It is of course fully mouldable thanks to Custom Shell, meaning the plastic can be heated and the boot formed to your foot; this is in addition to the liner being customised via a heat fitting. The result is excellent foot hold without pressure zones, meaning comfy all-day skiing and the highest levels of control. Further customisation comes from the micro-adjustable buckles, macro-adjustable leg clips, 3 position instep clip and the calf adjuster that can be modified for height and width.Ability LevelBoots10OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 3D Performance, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 3D Performance liner is heat mouldable for extra comfort and precision.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle4 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 90Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The Shift Pro 130 is for skiers who mix up riding lifts with hiking for better terrain. Coreframe ensures the boot has the power and control for skiing bigger lines; Surelock is simple and effective, providing 40 degrees of motion for walking and the necessary strength to compete with alpine models. The Custom Shell HD and the pre-formed, seamless 3D Custom Fit Race liner are both heat moulded to for a personalised shape, ensuring the best comfort and foot hold. A Grilamid cuff keeps the weight down and the flex consistent.Ability LevelOverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.Shell Polyamid and Polyolefin Custom Shell HD, mouldable. Durable, light and temperature stable with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with an Xecarb Coreframe.LinerMy CustomFit 3D Seamless Race with walk function, mouldable. This Seamless Race liner features a softer part which bends easily to follow the movement of the cuff in hiking mode and ensures a natural movement of the leg when touring.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.Sense Claw 45mmTwo positions for adapted fit and sensations options. The unhooked position allows you to reach the right level of progressiveness and rebound, while the hooked position ensures maximum stiffness and performance.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.SpecificationCategory: BackcountryFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Cinch 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D), 2 Hiking HooksSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Surelock skiwalkRange of Motion: 40Weight (g): 1631 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
The S/PRO 100 W sets a gold standard in what to expect from medium volume, firmer flexing women's ski boots. The shell construction ensures the boot feels impressively light, but it loses nothing in precision or power thanks to the use of Coreframe 360o. Custom Shell HD provides an effective and quick custom fitting, the seamless liner continues the theme of weight reduction and also the best levels of customised comfort. An adjustable calf further improves the fitting and a Sense Amplifier cuff adds a progressive feel to the flex.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Pro, customisable. Anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1850 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 100 W sets a gold standard in what to expect from medium volume, firmer flexing women's ski boots. The shell construction ensures the boot feels impressively light, but it loses nothing in precision or power thanks to the use of Coreframe 360o. Custom Shell HD provides an effective and quick custom fitting, the seamless liner continues the theme of weight reduction and also the best levels of customised comfort. An adjustable calf further improves the fitting and a Sense Amplifier cuff adds a progressive feel to the flex.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Pro, customisable. Anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1850 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 100 W sets a gold standard in what to expect from medium volume, firmer flexing women's ski boots. The shell construction ensures the boot feels impressively light, but it loses nothing in precision or power thanks to the use of Coreframe 360o. Custom Shell HD provides an effective and quick custom fitting, the seamless liner continues the theme of weight reduction and also the best levels of customised comfort. An adjustable calf further improves the fitting and a Sense Amplifier cuff adds a progressive feel to the flex.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable & PU Cuff. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the lower shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe.LinerMy Custom Fit 3D Seamless Pro, customisable. Anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe The Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Sense AmplifierThe Sense Amplifier is positioned towards the top of the front and medial part of the cuff. It makes you feel progressivity and precision at the beginning of every turn while providing unmatched rebound effect, quicker edge to edge transfer and acceleration at the end of the turn.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Calf AdjusterThe specific Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) to adapt to different women's calf morphologies.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 100Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: Medium-HighClips: 4 x Aluminium Low Profile, Microadjustable Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1850 (1/2 pair size 24.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£410
From Ellis Brigham
Salomon’s all new S/PRO Alpha 100 W ticks every box for advanced and expert women skiers looking for a slimmer fitting boot. The fit can be totally personalised thanks to a Custom Shell HD moulding process and heat fitted Custom Fit 3D liner, producing the best possible match to the skier’s foot and maximum comfort. In addition, the clips are easy to move to find the perfect position and the cuff can be adjusted for width and height. Performance is thanks to the race inspired build and thin shell walls that sit close to the foot for increased control. Best of all is the re-thinking of the buckle placement on the foot, by moving the instep clip back and increasing the space between the buckles, the heel hold is improved, entry and exit are easier, and there is less pressure on the top of the foot.Ability LevelBoots12OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 4D Sport with thermoformable Talyn and Custom Tongue, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 4D Sport liner is heat mouldable for extra comfort and precision. Talyn provides a comfortable, initial fit and can be spot heated to improve the shape and precision if required. The customisable Tongue is easy to adapt to unique shapes on the shin and over the instep.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£410
From Ellis Brigham
Salomon’s all new S/PRO Alpha 100 W ticks every box for advanced and expert women skiers looking for a slimmer fitting boot. The fit can be totally personalised thanks to a Custom Shell HD moulding process and heat fitted Custom Fit 3D liner, producing the best possible match to the skier’s foot and maximum comfort. In addition, the clips are easy to move to find the perfect position and the cuff can be adjusted for width and height. Performance is thanks to the race inspired build and thin shell walls that sit close to the foot for increased control. Best of all is the re-thinking of the buckle placement on the foot, by moving the instep clip back and increasing the space between the buckles, the heel hold is improved, entry and exit are easier, and there is less pressure on the top of the foot.Ability LevelBoots12OverviewFitGrippy heel pocket with a generous mid foot and average instep for what is narrower fitting boot, suits a round to angled toe shape.ShellPU Custom Shell and Cuff HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission.LinerMy Custom Fit 4D Sport with thermoformable Talyn and Custom Tongue, customisable. Pre-shaped around the ankles for better fit and support, the My Custom Fit 4D Sport liner is heat mouldable for extra comfort and precision. Talyn provides a comfortable, initial fit and can be spot heated to improve the shape and precision if required. The customisable Tongue is easy to adapt to unique shapes on the shin and over the instep.Key Featureseasier InstepThe thinner plastic and strategic positioning of the 2nd lower shell buckle put less pressure on the top of your foot and makes it easier to step in and out of your boots.3D Instep ShellThis Shell technology, with its thinner plastic and 45 degree positioning of the 2nd buckle ensures stronger heel lock and more consistent foothold without unnecessary instep pressure3D Instep Buckle3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalized foot hold.Calf AdjusterThe Calf Adjuster allows more fitting options (perimeter +11mm and height +4mm) to adapt to different women's calf morphologies.Tool Free Tooth Adjustmenteasy, tool-free and efficient personalisation of each calf volume is achieved by rotating and moving the lower buckle.General InformationCategory: AlpineFlex: 100Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Low-MediumClips: 4 x Aluminium, Microadjustable Sole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1610 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
The S/PRO 120 is Salomon's option for advanced and expert skiers wanting lightweight precision and comfort with the best in custom fitting. Custom Shell HD includes the cuff, meaning that in addition to the clog moulding to the foot, the boot now shapes to the lower leg. A seamless 3D liner is light, warm and comfortable, and can be custom moulded. The stiff Coreframe, Sense Amplifier and Sense Strap combine to boost performance by producing a more progressive flex and increasing rebound. GripWalk sole units add ease of use and safety.Ability LevelOverviewFitGrippy heel pocket with a generous mid foot and average instep, suits a round to angled toe shape.Shell PU Custom Shell HD, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with Coreframe 360.LinerMy Custom Fit 3D Seamless Pro, customisable. New anatomically designed pre-shaped Pro liner without internal and external stiches. Improves foothold, steering and ensures a precise fit.Key FeaturesCoreframe 360Coreframe 360 uses shell and cuff inserts to guarantee the boot keeps its geometry and stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and allows full customisation possibilities.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.Oversized PivotThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.Flex AdjusterDepending on the snow conditions, the Flex Adjuster allows you to boost or smooth your flex.Sensifit InsertThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.SpecificationCategory: AlpineFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Riveted Aluminium, Microadjustable (1 x 3D)Sole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1750 (1/2 pair size 26.5)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
£450
From Ellis Brigham
Salomon's Summit Pure W has been specially developed for women who want a lightweight functional boot that delivers on up-hill as well as down-hill performance. Custom Shell HD means the fit can be easily and quickly tweaked in store; to really dial in the foot hold it uses a Boa fastening system that keeps the foot securely held in in place. Ascents are made easier with a whopping 70 degrees of articulation and frictionless pivots; full tech inserts mean you can pair them up with your favourite pin bindings. With a lightweight shell, easy-to-tighten Powerstrap, and a fully mouldable liner, these boots will make you want to go further, faster with more control. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1120 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
The MTN explore W is the ultimate choice for female tourers who want lightness and function for uphill comfort, along with performance for even the hardest descents. Oversized Pivots, Carbon Spine Technology and Sensifit shell give the boot power and control while the Surelock walk mechanism with 63o of movement and lightweight Grilamid construction helps on tiring ascents. A women's specific Ultralight full thermo liner is custom moulded for the best comfort and foot hold, as well as toasty feet. [Full Details]
£480
From Ellis Brigham
Salomon’s S/Pro Supra BOA 105 W challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new women's model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep. General InformationCategory: AlpineFlex: 105Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£480
From Ellis Brigham
Salomon’s S/Pro Supra BOA 105 W challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new women's model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep. General InformationCategory: AlpineFlex: 105Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1600 (1/2 pair size 24.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£520
From Ellis Brigham
Salomon’s S/Pro Supra BOA 120 challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep.General InformationCategory: AlpineFlex: 120Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1880 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£520
From Ellis Brigham
Salomon’s S/Pro Supra BOA 120 challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep.General InformationCategory: AlpineFlex: 120Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1880 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Charge down and climb back up, the Shift Pro is a versatile boot that is as happy running laps from lifts as it is hiking to earn the goods. Launched with great success last season, this 22/23 version changes only in graphic and colour. The shape is based on the successful S/Pro so it has a comfortable medium volume fit. This can be fine-tuned with Salomon's excellent Custom Shell HD mouldable shell and the pre-shaped, seamless Custom Fit 3D liner that is moulded to the skier's foot during fitting. Coreframe construction ensures lightness and provides power; the Surelock ski/walk system is secure and simple with a 40 degree range of motion.Ability LevelTour5OverviewFitSnug rear foot with generous room around the forefoot, the instep height is average to high and the toe shape is rounded.ShellPolyolefin cuff and PU clog, Custom Shell HD, mouldable. Durable and light with a true alpine flex when skiing. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. The shell is reinforced with a fibreglass Coreframe.LinerMy Custom Fit 4D Performance with thermoformable Talyn, mouldable. New anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required.Key FeaturesCoreframeThe Coreframe is an insert that guarantees the boot's stiffness after the Custom Shell HD process. It brings lightness, enhances sensations and increases power.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Sensifit InsertsThe soft PU Sensifit insert on the external side of the shell makes it super easy to get in the boot, delivering comfy step-in and anatomical wrapping of the instep.360 degree; 45mm PowerstrapA thick 45mm strap to hold the foot securely and optimize power transmission.Riveted Oversized PivotsThe Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.3D BuckleChoose from 3 different positions of the instep buckle for optimum in-step comfort, full customisation and personalised foot hold.General InformationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: Medium-HighClips: 4 x Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 40Weight (g): 1760 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Salomon's S/LAB MTN impresses both freeriders and tourers thanks to remarkable comfort on the way up and no-compromise performance on the way down. A Pebax cuff and Grilamid+ shell keep weight low and deliver precise control. Oversized pivots, Sensifit Shell and BC Carbon Spine all help to beef up the power without adding valuable grams. The fully mouldable liner and shell ensure the best possible fit; 47 degrees of motion boosts walking ease and Contragrip soles improve grip.Ability LevelOverviewFitGrippy heel pocket, medium instep with average to narrow forefoot and angular tapered toe box.Shell Pebax cuff, Grilamid clog, Custom Shell HD, mouldable. High-quality polyamide plastic which provides adapted rigidity, lightness and downhill performance. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. Uses a Carbon Spine touring design for light yet strong and stiff rear support when skiing.LinerMy CustomFit 3D Freetouring, mouldable. A new material pattern creates a more inclusive fit, avoiding pressure points and a new foam construction ensures lightness and comfort.Key Features2 Riveted Light and Lock System BucklesThe buckle situated on the cuff offers a specific tooth that keeps the cuff closed while offering great range of motion when skinning or walking up.Motion FlexTouring cuff construction with a spine made of carbon and composite fibre. It allows a high range of motion when skinning while guaranteeing a true and progressive alpine flex.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Dual Claw 50mm PowerstrapInspired by racing and designed to ensure maximum power transmission, this strap is made with a claw system to allow for low elasticity and provide better leg hold.Contagrip Rubber SoleGripWalk pads are pre-mounted and their specific shape improves walking comfort and grip whatever the conditions.SpecificationCategory: BackcountryFlex: 120Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Dual Claw 50mmVolume: Medium-LowClips: 2 x Riveted Light, MicroadjuastableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Surelock skiwalkRange of Motion: 47Weight (g): 1570 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
Salomon's S/LAB MTN impresses both freeriders and tourers thanks to remarkable comfort on the way up and no-compromise performance on the way down. A Pebax cuff and Grilamid+ shell keep weight low and deliver precise control. Oversized pivots, Sensifit Shell and BC Carbon Spine all help to beef up the power without adding valuable grams. The fully mouldable liner and shell ensure the best possible fit; 47 degrees of motion boosts walking ease and Contragrip soles improve grip.Ability LevelOverviewFitGrippy heel pocket, medium instep with average to narrow forefoot and angular tapered toe box.Shell Pebax cuff, Grilamid clog, Custom Shell HD, mouldable. High-quality polyamide plastic which provides adapted rigidity, lightness and downhill performance. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direct transmission. Uses a Carbon Spine touring design for light yet strong and stiff rear support when skiing.LinerMy CustomFit 3D Freetouring, mouldable. A new material pattern creates a more inclusive fit, avoiding pressure points and a new foam construction ensures lightness and comfort.Key Features2 Riveted Light and Lock System BucklesThe buckle situated on the cuff offers a specific tooth that keeps the cuff closed while offering great range of motion when skinning or walking up.Motion FlexTouring cuff construction with a spine made of carbon and composite fibre. It allows a high range of motion when skinning while guaranteeing a true and progressive alpine flex.Surelock Ski WalkSecure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance.Dual Claw 50mm PowerstrapInspired by racing and designed to ensure maximum power transmission, this strap is made with a claw system to allow for low elasticity and provide better leg hold.Contagrip Rubber SoleGripWalk pads are pre-mounted and their specific shape improves walking comfort and grip whatever the conditions.SpecificationCategory: BackcountryFlex: 120Last Width: 98-104Custom Shell: YesCustom Liner: YesPower Strap: Dual Claw 50mmVolume: Medium-LowClips: 2 x Riveted Light, MicroadjuastableSole Unit: Tour (ISO 9523)Pin Inserts: YesHike Mode: Yes, Surelock skiwalkRange of Motion: 47Weight (g): 1570 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
£520
From Ellis Brigham
Salomon’s S/Pro Supra BOA 120 challenges traditional boot construction to introduce a new level of fit, performance and comfort. This a new model for winter 23/24, released early through a very select number of outlets. Clips over the foot are gone and instead BOA uses a cable system with 5 points of contact. The result is a better fit and less chance of creating pressure spots. Simply turn the dial to tighten the cable and wrap the boot; reverse the dial to decrease pressure, or lift the dial to completely de-tension the cable when getting in or out. The shell uses Salmon’s excellent Custom Shell technology for a customisable fit, the shell is heated during the fitting and allowed to cool and shape to the skier’s foot. The liner is a My exowrap Performance model that too can be personalised through a simple heat fitting process and uses Salomon’s clever Talyn material to maximise the shaping and hold around the ankles. This the next dimension of fit, dialled in with precision.Ability LevelBoots12OverviewFitMedium volume fit with a snug rear foot and especially generous toe box with a squared off shape. BOA ensures a consistent wrap.ShellPU Custom Shell with Power Spine, customisable. PU is a material with consistent density that ensures perfect wrapping, progressivity & good power transmission. The Custom Shell HD process aims to bring fast personalisation to the shell of your boots and the powerspine delivers more power to your skis when you need it.LinerMy exowrap 4D Performance with thermoformable Talyn, Custom Tongue and elastic Belt, mouldable. Anatomically designed pre-shaped Performance liner. Improves foothold, steering and ensures a precise, comfortable fit. Talyn provides a comfortable, initial fit and can be heated to improve the shape and precision if required. Works perfectly with the thin shell walls and BOA closure of the shell. The tongue can be re-positioned for the maximum comfort; the elastic Belt securely holds the liner in place, comfortably securing the foot.Key FeaturesBOA Fit SystemThe BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Power SpineA metal plate links the cuff and the clog to provide support, progressive rebound out of the turn, and powerful flex no matter the snow conditions.eXO WrapA unique shell and liner construction powered by a BOA Fit Systems wraps your feet with prescision to deliver maximum foothold and performanceCustom TongueA fully removable and customisable tongue that allows for the perfect fit over the instep.General InformationCategory: AlpineFlex: 120Last Width: 100-106mmCustom Shell: YesCustom Liner: YesPower Strap: Velcro 45mmVolume: MediumClips: 2 x Aluminium Cuff Buckles, Microadjustable; Boa closure on clogSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1880 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
The Salomon MTN Summit Pro is built for quick ascents and technical skiing on the way back down. Featuring Custom Shell HD the fit can be quickly and easily moulded in store while the Boa System lets you really dial in foot hold over the instep for a precise feel. With 70 degrees of articulation in the cuff and frictionless pivots ensures that longer tours require less energy meaning you can go further and faster. Full tech inserts means that you can pair them up with your favourite pin bindings and rounding the boot off is a chunky 45mm powerstrap combined with a powerplate for power and control on the descent back down. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1100 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
The Salomon MTN Summit Pro is built for quick ascents and technical skiing on the way back down. Featuring Custom Shell HD the fit can be quickly and easily moulded in store while the Boa System lets you really dial in foot hold over the instep for a precise feel. With 70 degrees of articulation in the cuff and frictionless pivots ensures that longer tours require less energy meaning you can go further and faster. Full tech inserts means that you can pair them up with your favourite pin bindings and rounding the boot off is a chunky 45mm powerstrap combined with a powerplate for power and control on the descent back down. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1100 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
The Salomon MTN Summit Pro is built for quick ascents and technical skiing on the way back down. Featuring Custom Shell HD the fit can be quickly and easily moulded in store while the Boa System lets you really dial in foot hold over the instep for a precise feel. With 70 degrees of articulation in the cuff and frictionless pivots ensures that longer tours require less energy meaning you can go further and faster. Full tech inserts means that you can pair them up with your favourite pin bindings and rounding the boot off is a chunky 45mm powerstrap combined with a powerplate for power and control on the descent back down. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1100 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
The Salomon MTN Summit Pro is built for quick ascents and technical skiing on the way back down. Featuring Custom Shell HD the fit can be quickly and easily moulded in store while the Boa System lets you really dial in foot hold over the instep for a precise feel. With 70 degrees of articulation in the cuff and frictionless pivots ensures that longer tours require less energy meaning you can go further and faster. Full tech inserts means that you can pair them up with your favourite pin bindings and rounding the boot off is a chunky 45mm powerstrap combined with a powerplate for power and control on the descent back down. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1100 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
The Salomon MTN Summit Pro is built for quick ascents and technical skiing on the way back down. Featuring Custom Shell HD the fit can be quickly and easily moulded in store while the Boa System lets you really dial in foot hold over the instep for a precise feel. With 70 degrees of articulation in the cuff and frictionless pivots ensures that longer tours require less energy meaning you can go further and faster. Full tech inserts means that you can pair them up with your favourite pin bindings and rounding the boot off is a chunky 45mm powerstrap combined with a powerplate for power and control on the descent back down. Suitable for pin bindings only. Ability LevelTour1OverviewFitMedium to low volume fit all over, with a snug heel pocket and generous toe space. ShellCustom Shell HD, mouldable. The Custom Shell HD process lets boot fitters personalize to the boot’s lower shell or cuff in 10 minutes, while thin wall construction and new materials keep the foot closer to it.LinerMy CustomFit Tour Pro, mouldable. This Pro liner with Ultralon foam construction and neoprene toe box offers a comfortable fit and more warmth, while the Lycra coating makes it easy to step in.Key FeaturesBOA fit system The BOA Fit System delivers a micro-adjustable wire cable fit system, that offers a precision fit engineered to perform in the toughest conditions. Powerstrap 45mm + Powerplate The 45 mm strap is linked with a powerplate to evenly spread the forward pressure when skiing downhill. Frictionless pivots Polymer bushings provide a completely natural cuff rotation for effortless movements on the way up. Touring Belt A plastic strip, fixed to the inside of the boot and linked to the BOA Fit System's cable lace, enhances tightening and ensures perfect foothold for walking up and skiing down. General InformationCategory: BackcountryLast Width: 99-105Custom Shell: YesCustom Liner: YesPower Strap: Power Strap 45mmVolume: Low-MediumClips: 1 x Light Cuff , Boa closure systemSole Unit: Pin Only (out of norm)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 70Weight (g): 1100 (1/2 pair size 26.5)Binding Compatibility: Pin [Full Details]
Copyright Interhike. All rights reserved.