Compare Prices on Outdoor Equipment
Travel and Outdoor Equipment Price Comparison > Snowsports > Ski Boots
Products available in:
This week's most popular products:
£65
From Ellis Brigham
Mini skiers need maximum convenience and comfort. The Z1 comes with 1 clip for ease-of-use and a wide opening shell with a pull handle on the tongue to make stepping in and out simple. It uses Vario Last across the range that changes the shape of larger sizes to suit how children's feet grow. It also uses a Natural Kids Stance for a more comfortable skiing position that puts less stress on little joints. The perfect way to start skiing.Ability LevelOverviewFitMedium to high volume with good heel hold and and roomy toe area.Shell Superlight shell and cuff. LinerJunior Liner. Soft, warm and comfortable, with a loop on the tongue.Key FeaturesJr Hi-TopHigher tongue profile and asymmetrical lateral support produces instant skier-to-ski power transfer for easier turns.Two Phase Flexthe smooth flex helps produce a natural centered balance.Vario Last DesignThe last width varies with the size, smaller sizes being wider in relation to the length compared to larger sizes. This accomodates the natural growth and shape of kid's feet.DuoFlexThe DuoFlex enables excellent balance and control in all portions of every turn.SpecificationCategory: AlpineFlex: n/aLast Width: n/aCustom Shell: NoCustom Liner: NoPower Strap: n/aVolume: Medium-HighClips: 2 X Metal/Plastic Low ProfileSole Unit: Alpine (Child ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 675 (1/2 pair size 16.5)Binding Compatibility: Alpine (Children), GripWalk (Children) [Full Details]
The Revolver W is ladies who want to charge in the park and all over the mountain. It's designed with room on the calf and to also eliminate excess space in other areas. The 3-piece design ensures a consistent flex and reduces shin bang, ideal for all terrain skiing as well as stomping landings. The soft rubber of the boot board absorbs shocks and vibrations for a smooth ride in the park or on steep lines. The flex of 90 is ideal for a variety of terrain, firm enough to support when pushing hard over the rest of the mountain, not so firm to hinder progression in the park. The Intuition Tongue liner is heat moulded providing a fully customised fit and toasty warm fit, as well as feeling super light. If required the shell can be heat moulded too, for the best possible shape and most even pressure.Ability LevelBoots10OverviewFitSlighlty narower than average on the forefoot, nice open toe box, medium around heel. Cabrio design alows some flexibilty on the height over the instepShellTPU shell and cuff, Grilamid tongue, mouldable. K2's FL3X 3-piece construction offers a smooth flex with no deformation of the shell, leading to better foot hold, increased control and improved shock absorption.LinerIntuition Tongue, mouldable. The Intuition Tongue liner's laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way. 4mm Intuition medium density foam for a solid balance of comfort and performance; 4mm open cell foam for warmth and comfort; 5mm Intuition high density foam for a responsive and effecient energy transfer.Key FeaturesRibbed Tongue100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. No more shin bang!easy On/OffThe front of the shell opens a full 90º to slide your foot in and out with ease in all temperatures. Like putting on slippers!Forward Lean & Cuff Alignment Tool-less forward angle adjustment. easy, precise lateral angle adjustment.Infinte PivotUnlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.Widetrack Buckle Durable aluminum levers with a minimalistic lightweight design. This adjustment mechanism is engineered to increase precision and durability while maintaining on-the-fly, single-handed micro-adjustment.General InformationCategory: AlpineFlex: 90Last Width: 99Custom Shell: YesCustom Liner: YesPower Strap: VelcroVolume: Low-MediumClips: n/aSole Unit: Alpine (ISO 5355)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1700 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
£340
From Ellis Brigham
Nordica's Promachine 95 W fuses the feel and precision of a race model with all day comfort and all mountain versatility. The shell of the boot uses Tri Force Construction, a combination of three different plastics. The hardest one creates a rigid spine for power transmission; a softer plastic is used for the anatomical frame and provides excellent wrap and even pressure over the foot. The softest material is on the throat of the boot and results in much easier entry and exit. It's a significantly lighter boot than previous models and feels more responsive as well as offering better comfort. Infrared Technology on the shell means that the plastic can be moulded and customised where needed. An Isotherm 3D PrimaLoft liner boosts warmth and improves the feel around the ankles with its pre-formed shaping. This fit is taken to the next level once the liner is moulded to the skier's foot, a simple process done in the store during the fitting.​Ability LevelOverviewFitA performance feel and generally snug. Grippy rear foot and medium to low both over the instep and across the width.Shell Infrared PU shell and cuff, mouldable. Lightweight and close fitting, but with space in all the right areas, the Promachine shell is a performance-skiers dream with precise energy transfer and a smooth flex. The Infrared Technology is a super-effective way to customise the fit precisely for the best possible shape.LinerIsotherm 3D W PrimaLoft, mouldable. The 3D pre-shaping mimics the natural shape of ankle bones, improving both the comfort and the heel hold by evening out the pressure. PrimaLoft ensures extra comfort and warmth.Key FeaturesTri-Force ConstructionLightweight athletic equipment is fundamentally important, so Nordica have developed a shell specific to the challenges associated with a product this light. The Tri-Force Frame is a remarkable concept, using an anatomical shell design that channels energy through the body of the boot to the edges of your skis. A combination of harder plastics at the spine and chassis, and softer plastics around the foot and instep, allows nimble and precise movements while maintaining the highest level of comfort.Infrared TechnologyInfrared Technology is a super-effective way to customise the fit precisely for the best possible shape. The shell is slowly heated and then a vacuum system is used to gently reshape the plastic where any additional moulding is need to get the best match to a skier's feet.PrimaLoftPrimaLoft is an industry-leading waterproof, synthetic insulation. It provides warmth and comfort so you can focus on enjoying the conditions.SpecificationCategory: AlpineFlex: 95Last Width: 98Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: LowClips: 4 x Aluminium, MicroadjustableSole Unit: Alpine (Adult ISO 5355)Pin Inserts: NoHike Mode: NoWeight (g): 1650 (1/2 pair size 24.5)Binding Compatibility: Alpine, GripWalk, WTR, Multi Norm [Full Details]
The new Cosmos Tour takes everything that was great about the Cosmos III and builds on it. It’s the perfect option for ski tourers with high volume feet who have previously struggled to get comfortable AT boots. The new Cabrio Hybrid construction ensures easy mobility of the cuff for climbing and gives the skier solid support during turn. Grilamid construction is lightweight for the way up but provides plenty of power on the way down. Powerlite 2.0 technology means an impressive 60 degrees of articulation. A simple yet effective Rear Hook ski/walk mechanism requires minimal effort yet is strong and dependable. The mouldable PWR Lite High liner improves the fit and comfort; full length Vibram soles increase grip. 3 ergal Micro-Adjustable Buckles and a cable closure over the forefoot make tightening or loosening the boots simple.Ability LevelTour2OverviewFitAverage rear foot volume with a higher volume forefoot and generous over the instep.ShellGrilamid Powerlite shell and cuff. Powerlite 2.0 boots are built from Grilamid, making them stiffer, lighter, and thinner than other lightweight shells. The result is precise, solid and secure skiing with instant comfort. 3 piece or cabrio design uses a shell, cuff and separate tongue for improved range of motion, comfort and ease of entry/exit.LinerPWR Lite High, mouldable. Lightweight, warm and custom moulded for the best possible fit.Key FeaturesRear Hook Ski/Walk Mechanismeasy to operate, the Powerlite 2.0 rear hook mechanism combines strength and stability in ski mode with total freedom when skinning or walking. This next generation hook mechanism locks automatically when downhill skiing. Full-Length Vibram Bi-Density RubberFull-length Vibram bi-density rubber under the instep area provides maximum grip when scrambling over any terrain that isn't snow. The bi-density composition has firmer black rubber around the sole's perimeter to provide durability and superior edging power in step-in bindings. Softer red rubber in the sole's midsection gives maximum grip for scrambling.Lock CatchesScott's Locking Buckle Catches keep the buckle bails in place when the buckles are opened for hiking.Adjustable SpoilerAn Asymmetric Spoiler provides medial and rearward support.Dual Action TongueThe newly developed Dual Action Tongue allows an easy step in and out of the boot. Due to the flexibility of the tongue it follows the movement when in walk mode and is fully linked to the cuff when skiing, which results in a more progressive flex. General InformationCategory: BackcountryFlex: 120Last Width: 103.5Custom Shell: NoCustom Liner: YesPower Strap: VelcroVolume: HighClips: 3 x ergal® Microadjustable Buckles + Cable closureSole Unit: Tour (ISO 9523)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 60Weight (g): 1390 (1/2 pair size 26.5)Binding Compatibility: Multi Norm, PinCert, Pin [Full Details]
Ski Boots - Compare Prices
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£450
From Ellis Brigham
The Hawx Ultra 115 W is a high-end model that is surprisingly light and this latest version is now more stable and powerful. It has plenty of performance thanks to the energy Backbone that directs power efficiently to the ski edges and the 40mm strap that helps you apply power to the boot. We can heat-mould the Memory Fit shell to closely match the skier's foot shape and further customisation options come from the excellent Mimic Platinum mouldable liner. With Power Shift on the spine to adjust forward lean and flex, and dual cuff alignment for natural power transmission, this great boot can be perfectly set to your skiing style. And don't worry about cold feet on chilly mornings as the Thinsulate insulation in the inner boot keeps toes toasty warm.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum W 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 24.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Atomic Hawx Prime XTD 105 W CT GW is has the perfect balance of freeride performance and touring functionality. It delivers the Legendary Hawx Feel, skiing power and all mountain capability of a Hawx Prime W thanks to Prolite construction, and the epic natural movement of Backland thanks to the Frictionless Pivot and the Free/Lock 4.0 ski-to-walk mechanism. With a women-specific cuff height and shape, and a width for medium feet, this boot is especially tuned for all-day comfort. The pre-shaped 3D Gold liner offers out of the box fit and features an Achilles Flex Zone for uphill mobility. Complete Tech inserts in both the toe and the heel allow for maximum touring binding compatibility. If you need a boot that suits your adventurous side, then look no further. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 105Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 35mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1697 (1/2 pair size 24.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£460
From Ellis Brigham
The Hawx Prime XTD 110 CT GW blends all-mountain comfort and freeride touring performance. Using Atomic's Prolite construction means that this boot is built for skiing power and touring functionality. Features like the Free/Lock 4.0 ski-to-walk mechanism, Frictionless Pivot, and Complete Tech inserts in both the toe and the heel allow for maximum comfort when ascending. The 3D Gold liner offers out of the box comfort with custom-moulding capacities, as well as an Achilles Flex Zone for greater range of motion. At 110 flex this boot is perfect for good skiers with medium volume feet looking to get into touring, but wanting control and performance when skiing downhill too. Ability LevelTour5OverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep. ShellProlite PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.Liner3D Gold with Touring Flex Zone, mouldable. Thermoformable material is used in the heel, ankle, and midfoot areas with added articulation at the rear of the liner for hike mode. The liner is heated in an oven and is cooled to form to the shape of the skier's feet. 3D means pre-shaped heel and ankles areas for better foot hold and comfort.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.General InformationCategory: BackcountryFlex: 110Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 40mmVolume: MediumClips: 2 x 7000 Series Aluminium Tour, 2 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: YesSizing Hike Mode: YesRange of Motion: 54Weight (g): 1862 (1/2 pair size 26.5)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£320 - £470
This latest version of possibly the best-fitting, wider-volume men's boot has a new shell design for increased power and updated liners for improved comfort. The Magna 130 uses all the finest bits of the Hawx family and adds an effective mix of stiff flex and high volume fit, making it a winning option for advanced and expert skiers with wider feet. Prolite construction delivers powerful performance by adding reinforcement in critical zones of the lower shell and upper cuff while keeping the boot agile. The shell is Memory Fit so can be heated and moulded to better suit the specifics of each skier’s feet. The liner is the class-leading 3D Mimic Gold which can be custom moulded too; Thinsulate adds warmth. Powershift on the spine increases the fine-tuning, allowing the forward lean and the flex to set-up perfectly for each skier’s needs.Ability LevelBoots13OverviewFitGenerally a high volume fit all over with a high instep and sqaure toe box. Grippier around the heel compared to most higher volume boots. ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13, 15 or 17 degrees simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 102-108Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1976 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£470
From Ellis Brigham
The Hawx Prime 130 shines as a high-performance boot with impressive comfort. The Prolite Construction lightens the boot and improves the fit and sensitivity without losing any of the power of previous versions. True Flex PU results in a shell and cuff that are less affected by temperature changes and produce a more consistent flex. The Memory Fit shell, aided by the energy Backbone, delivers precise energy transmission and can be moulded in-store to the skier’s feet for the best possible shape. The pre-formed 3D Mimic Platinum liner is customisable too and the inclusion of Thinsulate material makes it nice and warm. The personalisation goes further. Power Shift alters the forward lean on the cuff and the amount of flex, both can be adjusted to each individual and it’s so simple to do, it can be altered anytime.Ability LevelBoots14OverviewFitMedium fit around the heel and ankle, medium to high instep, medum to wide across the forefoot.ShellTrue Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic’s unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. 3D Stretch Toe Box makes sure the toes have a bit more space in the liner when needed. Thinsulate is the world’s best-known insulation and its use keeps feet warmer.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.General InformationCategory: AlpineFlex: 130Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: MediumClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 23223)Pin Inserts: NoSizing Hike Mode: NoRange of Motion: n/aWeight (g): 1812 (1/2 pair size 26.5)Binding Compatibility: GripWalk, WTR, Multi Norm [Full Details]
£520
From Ellis Brigham
The upgraded Ultra 130 is 25% more stable and even more powerful than the previous version. It sits at the top of our advanced/expert selection with a True Flex shell of 130. True Flex PU is less affected by temperature and while traditional PU softens or stiffens as the mercury goes up or down altering the way the boot feels, True Flex stays consistent. This high-grade plastic also means an ultra-thin shell can be produced, increasing sensitivity with a noticeable weight saving but without any loss in performance or stability. The energy Backbone on the spine effectively transmits forces to drive skis, and the Power Shift on the rear of the cuff allows forward lean and flex to be adjusted for a personalised setup. A 98mm last and pre-formed ankle pockets provide all the foot hold good skiers want. The class-leading Mimic Platinum custom liner and Memory Fit shell deliver the best possible fit.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£520
From Ellis Brigham
The upgraded Ultra 130 is 25% more stable and even more powerful than the previous version. It sits at the top of our advanced/expert selection with a True Flex shell of 130. True Flex PU is less affected by temperature and while traditional PU softens or stiffens as the mercury goes up or down altering the way the boot feels, True Flex stays consistent. This high-grade plastic also means an ultra-thin shell can be produced, increasing sensitivity with a noticeable weight saving but without any loss in performance or stability. The energy Backbone on the spine effectively transmits forces to drive skis, and the Power Shift on the rear of the cuff allows forward lean and flex to be adjusted for a personalised setup. A 98mm last and pre-formed ankle pockets provide all the foot hold good skiers want. The class-leading Mimic Platinum custom liner and Memory Fit shell deliver the best possible fit.Ability LevelOverviewFitSnug fit around the rear foot and medium over the instep, medium to narrow on the forefoot, round toe shape.Shell True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. Updated for this season with stronger shell walls for even better power transfer and stability. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.Liner3D Mimic Platinum 3M Thinsulate, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. 3D means pre-shaped heel and ankles areas for better foot hold and comfort. Thinsulate is the world's best-known insulation and its use keeps feet warmer. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.Power ShiftPower Shift allows the forward lean to be adjusted to 13o, 15o or 17o simply by moving the power control up and down. You can also alter the flex index by +/- 10 flex points by adding or removing a screw. Creates a completely personalised set-up.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ThinsulateThe more air a material traps in a given space the greater its insulating value. The microfibres in 3M Thinsulate insulation are far finer than any other fibres, which means they trap more insulating air in less space, even when wet. This keeps feet warm and responsive even in extremely cold and damp conditions.SpecificationCategory: AlpineFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: NoHike Mode: NoWeight (g): 1810 (1/2 pair size 26.0)Binding Compatibility: GripWalk, Multi Norm [Full Details]
£530
From Ellis Brigham
Blending the comfort and power of the proven Prime range with the lightness and natural movement of the XTD and Backland models, the Hawx Prime XTD is where all mountain skiing meets freeride. Prolite construction uses different wall thicknesses on the shell to keep the weight down without affecting the performance. The tried and tested Free/Lock hike and ski system provides 54° of motion, ease of use and, thanks to the way it integrates the energy Backbone, precise ski control. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the special 3D Mimic Gold liner takes an impressive mould of the heel and ankle area for the best comfort and control. Comes with GripWalk soles and tech insoles so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell Prolite True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Gold with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 120Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Velcro 50mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1873 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£560
From Ellis Brigham
The Hawx Ultra XTD 115 W has the power and feel of a freeride boot thanks to Prolite construction and True Flex plastic, but also the lightness of a proper tour model. The range of motion is an impressive 54°, making ascents more comfortable; the Free/Lock 2.0 is an easy and effective walk mode that is solid when locked in to ski position. Atomic's Memory Fit customisable shell can be heat moulded during fitting, adding 4mm extra width if needed. The totally new Mimic liner technology creates a very impressive customised shape around the heel and ankles liner for better hold and maximum comfort.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1458 (1/2 pair size 24.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£560
From Ellis Brigham
The Hawx Ultra XTD 115 W has the power and feel of a freeride boot thanks to Prolite construction and True Flex plastic, but also the lightness of a proper tour model. The range of motion is an impressive 54°, making ascents more comfortable; the Free/Lock 2.0 is an easy and effective walk mode that is solid when locked in to ski position. Atomic's Memory Fit customisable shell can be heat moulded during fitting, adding 4mm extra width if needed. The totally new Mimic liner technology creates a very impressive customised shape around the heel and ankles liner for better hold and maximum comfort.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite True Flex PU Memory Fit shell with PU Memory Fit cuff, mouldable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13o/150/17o via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 115Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 40mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1458 (1/2 pair size 24.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£560
From Ellis Brigham
Blending the comfort and power of the proven Prime range with the lightness and natural movement of the XTD and Backland models, the Hawx Prime XTD is where all mountain skiing meets freeride and backcountry. Memory Fit on the shell means it can be heat moulded to even more closely match the foot shape; the excellent Mimic Platinum liner uses a unique process to take an impressive mould of the heel and ankle area for the best comfort and control. Comes with Grip Walk soles and tech insoles so it can be used with a range of bindings.Ability LevelOverviewFitAn average fit on the rearfoot with generous forefoot width and a medium to high instep.Shell True Flex PU shell and PU cuff, mouldable. True Flex is an exclusive Atomic shell material that means your flex and feel remains constant in a variety of temperatures. So, the boot you buy in store feels the same on the mountain, you don't lose horsepower in the spring and you don't have a boot that you can't flex in mid-winter. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 4.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 115Last Width: 100-106Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 40mmVolume: Medium-HighClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1575 (1/2 pair size 24.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£630
From Ellis Brigham
The Hawx Ultra XTD brings together the feel and control of the Hawx Ultra and the natural movement of the Backland range to harmonise freeride ability with awesome uphill capability. The Free/Lock 2.0 system is simple and effective and, combined with the frictionless pivot, provides a fluid 54 degrees of movement. Prolite construction with Grilamid minimises weight. The Memory Fit shell can be heat moulded and the new and very impressive Mimic liner is customisable too. The result is comfortable all-day touring in a boot that packs a punch when it comes to performance.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite Memory Fit Polyamide (PA) shell and cuff, customisable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1580 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£630
From Ellis Brigham
The Hawx Ultra XTD brings together the feel and control of the Hawx Ultra and the natural movement of the Backland range to harmonise freeride ability with awesome uphill capability. The Free/Lock 2.0 system is simple and effective and, combined with the frictionless pivot, provides a fluid 54 degrees of movement. Prolite construction with Grilamid minimises weight. The Memory Fit shell can be heat moulded and the new and very impressive Mimic liner is customisable too. The result is comfortable all-day touring in a boot that packs a punch when it comes to performance.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite Memory Fit Polyamide (PA) shell and cuff, customisable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1580 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£630
From Ellis Brigham
The Hawx Ultra XTD brings together the feel and control of the Hawx Ultra and the natural movement of the Backland range to harmonise freeride ability with awesome uphill capability. The Free/Lock 2.0 system is simple and effective and, combined with the frictionless pivot, provides a fluid 54 degrees of movement. Prolite construction with Grilamid minimises weight. The Memory Fit shell can be heat moulded and the new and very impressive Mimic liner is customisable too. The result is comfortable all-day touring in a boot that packs a punch when it comes to performance.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite Memory Fit Polyamide (PA) shell and cuff, customisable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1580 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
£630
From Ellis Brigham
The Hawx Ultra XTD brings together the feel and control of the Hawx Ultra and the natural movement of the Backland range to harmonise freeride ability with awesome uphill capability. The Free/Lock 2.0 system is simple and effective and, combined with the frictionless pivot, provides a fluid 54 degrees of movement. Prolite construction with Grilamid minimises weight. The Memory Fit shell can be heat moulded and the new and very impressive Mimic liner is customisable too. The result is comfortable all-day touring in a boot that packs a punch when it comes to performance.Ability LevelOverviewFitA medium to low volume fit around the rear foot and forefoot, average instep height and a round toe box.Shell Prolite Memory Fit Polyamide (PA) shell and cuff, customisable. The advanced heat fitting technology of Memory Fit creates a fully personalised shell and cuff in minutes. The key is Memolink, a special additive that improves the mouldability and stretch characteristics of the plastic. The boot shell is heated in an oven, then the skier's foot is placed inside the complete boot whilst it cools. With the foot's natural standing pressure, the forefoot of the boot can expand up to 3mm per side and the ankle area up to 5mm per side.LinerMimic Platinum with Touring Flex Zone, mouldable. Atomic's unique Mimic liners use a layer of supportive thermoformable material in the heel, ankle and tongue areas. After being softened in an oven, this material mimics the precise shape of your foot, and hardens in that shape for a perfect custom fit. In addition there is heat mouldable foam in the tongue, forefoot and ankle area that can be formed to the foot at the same time as the Mimic material.Key FeaturesFree/Lock 2.0Flick from ski to walk mode with one simple switch. In walk mode they offer an epic cuff movement. In the ski setting you can choose 13°/15°/17° via the adjustable forward lean.Frictionless PivotIgus polymer bushings provide a completely natural movement for effortless ascents.energy BackboneThe energy Backbone is a reinforced, asymmetric backbone that provides extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.ProliteProlite is a way of building skis and boots that turns traditional thinking on its head. Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then it builds up reinforcements in key areas where strength is needed.SpecificationCategory: BackcountryFlex: 130Last Width: 98-102Custom Shell: YesCustom Liner: YesPower Strap: Quick Release Cam 50mmVolume: Medium-LowClips: 4 x 6000-Series Aluminium, MicroadjustableSole Unit: Grip Walk (ISO 9523)Pin Inserts: YesHike Mode: Yes, Free/Lock 4.0Range of Motion: 54Weight (g): 1580 (1/2 pair size 26.0)Binding Compatibility: Grip Walk, Multi Norm, PinCert, Pin [Full Details]
Copyright Interhike. All rights reserved.